Skip to main content
Notice

Rapid Detection of Toxic Gases (Phase 2): Competition Document

Updated 17 November 2026

1. Introduction

This UK Defence Innovation (UKDI) competition is run on behalf of the Home Office (HO) and the National Protective Security Authority (NPSA). It is seeking proposals that enable the rapid detection of toxic gases to improve public safety by providing an early warning to indicate unsafe levels of toxic gases in busy spaces.

This competition is funded by the HO and NPSA.

In this competition we will be running a two-stage process. This approach helps innovators quickly understand whether their idea is a good fit for the competition, saving time and effort when applying. The table below summarises the differences and expectations of the two stages.

STAGE PURPOSE EXPECTED CONTENT
Submission Stage 1 Initial innovation screening Idea overview with outline technical plan
Submission Stage 2 Full detailed proposal review (by invitation only) Detailed proposal with full technical description, detailed project plan and finance breakdown

All Stage 1 submissions will be carefully reviewed by the customers’ competition team. They will look for ideas that align well with the competition, demonstrate a strong chance of successful delivery, and meet the customer’s needs. Submissions that demonstrate a good fit will be invited to progress to Stage 2 and submit a full proposal.

2. Competition key information

Key Information Competition Details
Stage 1 submission deadline 12:00 Midday on 10 December 2026 GMT
Stage 1 decision release 6 January 2027
Stage 2 open (by invitation) 12:00 Midday on 7 January 2027 GMT
Stage 2 submission deadline 12:00 Midday on 4 February 2027 GMT
Total funding available A minimum of £1 million (excluding VAT) total funding is available. A number of proposals may be funded within this total. We expect proposals to be in the region of £250,000
Technology Readiness Level (TRL) Entry at a minimum of TRL 4, to achieve a minimum of TRL 6, with a maximum of TRL 7
Contract start month Aim to start April 2027
Project duration Equal to or less than 11 months
Risk Assessment Reference RAR-GKPQPVM Level 0
Stage 2 feedback release date 12 March 2027
Stage 1 and 2 pre-sift criteria See Section 8 Pre-sift Criteria

2.1 Competition Specific Requirements

Please note that this competition has specific requirements as part of its pre-sift criteria for both Stage 1 and Stage 2; only submitted proposals that demonstrate compliance with the UKDI pre-sift criteria at each stage will be taken forward to full review at Stage 1 and assessment at Stage 2. 

For the full list of criteria, please see Section 8. 

2.2 Where do I submit my proposal?

Both Stage 1 and Stage 2 forms are to be submitted via the UKDI Online Submission Service where you will need to register for an account. Only proposals submitted through the UKDI Online Submission Service will be accepted.

Innovators are strongly advised to submit their proposal at least one hour before the deadline. Proposals submitted close to the deadline risk encountering issues that cannot be resolved in time.

Responsibility for timely submission rests entirely with the innovator; no extensions will be granted. If you are having problems submitting your proposal, email us prior to the deadline on accelerator@dstl.gov.uk or call 01980 950000 (option 3) Monday to Friday 0900-1200 only.

2.3 Public facing information

When submitting your Stage 1 and 2 proposals, you will be required to include a title, Proposal Value Proposition Statement (PVPS) and a short abstract. The title, PVPS and abstract you provide will be used by UKDI, and Partners Across His Majesty’s Government (PAG), to describe your project and its intended outcomes and benefits. They may be included at UKDI events in relation to this competition and in documentation such as brochures. As this information can be shared, it should not contain commercially sensitive information or information that may compromise Intellectual Property.

The title and abstract must be the same in both your Stage 1 and Stage 2 proposals. This is a pre-sift requirement.

2.4 Further guidance

For further guidance on what to expect during the submission process and how your proposal will be assessed, please see the following GOV.UK pages and forms:

3. Supporting activities

3.1 Slido Questions Service

A Slido site will be available for you to submit technical enquiries for one week after competition launch. Answers to these questions will be collated and published as clarifications on this web page by 23 November 2026.

Only questions related to the competition will be considered.

Non-technical questions about the competition process should be sent to the UKDI Help Centre, accelerator@dstl.gov.uk.

4. Points of Contact

During the competition phase all correspondence must be via the UKDI Points of Contact detailed below.

While all reasonable efforts will be made to answer queries, UKDI reserves the right to impose management controls if volumes of queries restrict fair access of information to all potential innovators. Questions should be specific to the contents of the competition and questions that cover anything outside of the competition will not be addressed.

4.1 Innovation Partner

UKDI has a team of locally based Innovation Partners that can provide support in working with UKDI. If you are a UK business, SMEs, start-up, sole trader, academic institution or research organisation, it is strongly recommended that you contact your local Innovation Partner to discuss your idea for any aspect of this competition.

You can initiate this through the submission of a Contact UKDI Form by following instructions on the Contact a UKDI Innovation Partner page if you do not already have an established relationship with your local Innovation Partner.

4.2 UKDI Help Centre

Competition queries including on process, application, commercial, technical and intellectual property aspects should be sent to the UKDI Help Centre at accelerator@dstl.gov.uk, quoting the competition title.

UKDI cannot guarantee a response before the submission deadline if the query is received within two weeks of either the Stage 1 or Stage 2 submission deadlines.  This applies to both Innovation Partners and the Help Centre.

5. Competition scope

5.1 Background: Keeping people safe in busy spaces

The rapid release of toxic gas in an enclosed or semi-enclosed environment may happen through accident, equipment malfunction or malicious intent. The impact could outpace existing safety procedures and potentially lead to adverse health effects for those in the vicinity. Therefore, we are seeking new technological solutions to this health, safety, and security challenge.

We are interested in detecting the presence of toxic gases in busy populated environments by using an early warning system that is triggered by the presence of toxic gases at or above 10% of their 10 minute Acute Exposure Guideline Levels (AEGL) Level 2 value. As well as detection, we are also interested in estimating the concentration of a toxic gas and reducing false alarms to an absolute minimum (especially within a complex operational environment). The possibility of integrating a network of sensors into wider, intelligent, surveillance systems or a smart facility management system, which might utilise other data sources, is also of interest.

A previous competition successfully developed a number of candidate technologies to TRL 4. This competition seeks to develop candidate technologies to at least TRL 6. Whilst the competition is open to previous innovators, proposals from new innovators are encouraged and all proposals will be judged equally. We suggest innovators look at the previous competition page, especially the clarifications.

5.2 The Challenge:  Wide ranging and rapid toxic gas detection beyond TRL 4

We require sensors that provide comprehensive coverage of chemical hazards, though some toxic gases are of greater concern than others in rapid release emergencies – for example, colourless or odourless gases that would not otherwise alert bystanders, compared to coloured or odoriferous gases that would generate sensory alarm. In future, certain gases may be prioritised for particular focus. At this stage, we are exploring detectors with the widest possible range of chemical libraries and capabilities.

Whilst we will not name any specific chemicals at this stage, we are interested in providing more guidance to innovators – the following sources provide a non-exhaustive idea of the range, types, and exposure guidelines of the sort of chemicals we would like to detect:

We are particularly interested in innovative technology developments outside of commonly used techniques for gas detection. However, existing and innovative applications or development based on current technologies are of interest and are in scope for this competition. In addition, detection would not have to be performed by a single detector and solutions requiring a network of sensors can also be considered.

We are interested in detecting toxic gases and transmitting / using the data as part of a wider integrated/networked building management system – the development of which is out of scope for this competition. Such a system would enable us to take necessary action in the event of a positive detection. Given that the application of this technology is within busy public areas, it is crucial to minimise the potential for both false positive and false negative results.

Provisions will be made for government-funded testing in a laboratory environment against toxic gases. This will provide confirmation that the prototype can detect gases of interest to the UK Government. This offer will be available as an option only once to each successful bidder during the project. The prototype must be made available by the 9th month of the project. The names of gases of interest to the government are classified and will not be disclosed.

Baseline Testing of Sensor Technology

A requirement of this competition is that the sensor technology will need to be tested (using HMG funding) in a laboratory environment against certain toxic gases. This will test the underlying sensor technology for the benefit of HMG customers.

During the first 10 months of the project window (May 2027 to February 2028 inclusive) innovators will be able to choose a slot in which their technology will be tested. It should be noted that specific dates may not be able to be accommodated due to testing capacity and dates will be assigned on a first-come, first-served basis.

The identities of gases of interest to government are classified and will not be disclosed. However, qualitative performance metrics will be provided to innovators following testing.

During development, please consider the approximate dimensions of the intended government testing environment in which the sensor technology will be exposed to toxic gases: W 260 × H 480 × D 330 mm (51 litres).

Sensor prototypes submitted for testing may not be returned to innovators and may be destroyed.

5.3 We are interested in…

We want innovative ideas to benefit end-users working in UK Defence and Security. We are interested in sensors that are already  at a minimum TRL 4 and can be developed to a minimum of TRL 6, with a maximum of TRL 7. Proposals will be judged on technical merit and project feasibility and viability, rather than a higher endpoint TRL.

Your proposal should include evidence of:

  • How you plan to develop a TRL 6 (or higher) sensor that:
  • can detect more than one toxic gas from, but not limited to, each of the following groups

    • Acids and bases such as ammonia, hydrogen bromide, hydrogen chloride, hydrogen cyanide, nitric acid, sulfuric acid.
    • Reductants such as hydrides (arsine, diborane, stibine, hydrogen selenide, hydrogen sulfide, phosphine) sulfur dioxide, methyl mercaptan
    • Oxidants such as chlorine, fluorine
    • Halo-organics such as bromomethane, phosgene, chlorosilanes
  • can alarm within a maximum of 30 seconds to the breach of appropriate AEGL of toxic gas
  • can operate unmonitored/with minimal human intervention or maintenance needed
  • can operate in enclosed and semi-enclosed environments
  • is tolerant to active spaces and various backgrounds – e.g. foot traffic or modes of urban transportation
  • is suitably sized for mounting in a busy detection location (size, weight and power)
  • is low cost (appreciation that any fully developed product would ideally be deployed in many and varied public locations)
  • is capable of being networked and transmitting detection signals externally
  • confirmation that you will create at least two sensor prototypes, one of which will be kept by the government for testing against toxic gases of interest. Please note that for health and safety reasons this sensor will not be returned and may be destroyed.
  • a prototype system successfully demonstrated in a realistic environment, with potential for translation to an operational environment through further work, either in this phase or in later developmental phases
  • innovation or a creative approach
  • clear demonstration of how the proposed work applies to any defence and security context

5.4 We are not interested in…

We are not interested in proposals that:

  • Develop technology that:
    • is only capable of detecting one toxic gas.
    • takes longer than 30 seconds to alert to a breach of the appropriate AEGL
    • could not operate effectively in busy spaces after further development
    • requires constant monitoring, maintenance, reagent re-supply, or additional out-of-sight equipment to function with the exception of what might be required to allow alarm monitoring in a control room.
    • necessitate complex and time-consuming installations, over and above what might be expected for networked smoke alarms, for example.
    • cannot be networked
    • constitutes communication-network-only ideas
  • constitute consultancy, paper-based studies or literature reviews which just summarise the existing literature without any view of future innovation
  • are an unsolicited resubmission of a previous UKDI/DASA bid
  • offer demonstrations of off-the-shelf products requiring no experimental development (unless applied in an innovative way to the challenge)
  • have a TRL at end of project lower than TRL 6 or higher than TRL 7
  • offer no real long-term prospect of integration into defence and security capabilities
  • offer no real prospect of out-competing existing technological solutions

6. Critical elements to include

6.1 Stage 1

Stage 1 submissions must include the following elements:

  • A description of what you propose to develop, demonstrating alignment with the scope
  • Justification/evidence that the current system or technology is at TRL 4 or above
  • A summary of how your technology works, being specific on expected performance parameters. Where possible include any evidence to support your claims (open-source literature, test results etc.)
  • Any constraints on the use of your technology (e.g. a minimum size, large power requirements, etc.)
  • Demonstrates how your proposal is new and innovative
  • Expected Rough Order of Magnitude cost of final Customer Off The Shelf unit

6.2 Stage 2

When writing your Stage 2 proposal, ensure you have:

  • used exactly the same title and abstract and included the relevant ACC number to those provided to us at Stage 1
  • submitted from the same organisational account as your Stage 1 submission
  • focused on the Phase 2 requirements but also included a brief (un-costed) outline of the next stages of work required for exploitation
  • included a list of other government funding you have received in this area, making it clear how this proposal differs from that work
  • included a detailed project plan with clear milestones and deliverables. Deliverables need to be well defined and designed to provide evidence of progress against the project plan. Your deliverables must include a written final report
  • included confirmation of the production of at least two prototypes, one of which will be provided for government testing
  • included what timeframe you expect to hand over your prototype for government testing
  • included configuration details of the sensor prototype to support the planning and delivery of government testing. This should include information on how the sensor will be integrated within the detector system, size, connectivity, and any other relevant configuration details.
  • planned (and costed) attendance at the following meetings, which will all be in the UK.
    • a kick-off meeting at the start of Phase 2
    • an end of project event at the end of Phase 2
    • regular reviews with the appointed Technical Partner and Project Manager
    • close down meeting at the end of the project

These activities may take place virtually. Slides presented at these meetings should be appropriately marked and made available.

  • identified any ethical / legal / regulatory factors. Associated risks should have been added to the Risk Register in Step 5 of the submission service along with details of how they will be managed, including break points in the project if approvals are not received
  • included any requirements for access to government Furnished X (GFX). GFX is the preferred nondescript term for anything that the government provides in which the ‘X’ could be artefacts such as information or equipment. UKDI cannot guarantee that GFX will be made available. You should have included an alternative plan in your proposal in case it is not available.
  • if you plan to use Artificial Intelligence (AI) to assist in writing your bid, please refer to the guidance on our UKDI Standard Terms and Conditions - GOV.UK

7. Accelerating and exploiting your innovation

Ensure your Stage 2 deliverables are designed with the aim of making it as easy as possible for assessors to recognise expected development in technology maturity of the potential solution over the lifetime of the project. Specifically, how this demonstrates improved capability against the current known (or presumed) solutions.

Over the lifetime of UKDI awarded projects, ideas may mature and accelerate under the guidance of appropriate stakeholders, toward being functional capabilities. How long this takes, and how far towards a deployable capability the innovations progress, will depend on any future exploitation after the completion of the UKDI project.

Low TRL research and development may not be able to articulate exploitation in great detail, but it should be clear that there is credible advantage to be gained from the technology development.

7.1 Exploitation beyond your project plan

Include the following information within the Desirability question within the UKDI Online Submission Service application form at Stage 2 to help the assessors understand your exploitation intentions:

  • expected additional work required beyond the end of the contract to develop an operationally deployable commercial product (for example, “scaling up” for manufacture, cyber security, integration with existing technologies, environmental operating conditions)
  • additional future applications and wider markets for exploitation
  • wider collaborations and networks you have already developed or any additional relationships you see as a requirement to support exploitation
  • how your product could be tested in a representative environment in later phases
  • any specific legal, ethical, commercial or regulatory considerations for exploitation

8. Pre-sift Criteria

Before your proposal is assessed, all proposals will be checked for compliance with the UKDI pre-sift criteria.  Proposals will be rejected before full assessment if they do not comply.

We may use a UKDI-approved AI tool to assist in the pre-sifting of innovator submissions. The use of AI will not alter our existing approach to protecting innovators’ intellectual property, confidentiality, or data. All submissions will continue to be handled in accordance with the same security, confidentiality, and intellectual property safeguards that currently apply to the competition process.

The AI tool will be used solely to support the evaluation process and will not make autonomous decisions. Any outputs generated by the AI tool will be reviewed by a human decision-maker, who will make the final determination regarding progression through the pre-sift stages.

8.1 Stage 1

To progress to a review of your idea, proposals must pass all Stage 1 pre-sift criteria. Failure against any single criterion will result in the proposal being excluded from further review.

Stage 1 Criteria Measure - Within scope (Pass) / Out of scope (Fail)
The innovation will deliver at no lower than TRL 6 at the conclusion of your project Pass / Fail
Your project starts at no less than TRL 4. You will be asked for supporting information to justify this Pass / Fail

8.2 Stage 2

To progress to full assessment, proposals must pass all Stage 2 pre-sift criteria. Failure against any single criterion will result in the proposal being excluded from further assessment. 

Stage 2 Criteria Measure - Within scope (Pass) / Out of scope (Fail)
The Proposal was invited to submit into Stage 2, and includes the Stage 1 ACC number in the Proposal (Step 3) Pass / Fail
The Proposal contains exactly the same title and abstract as the Stage 1 submission Pass / Fail
The Stage 2 Proposal is submitted by the same organisation as the invited Stage 1 submission Pass / Fail
The proposal outlines how it meets the scope of the competition Pass / Fail
The proposal explains how it meets the UKDI criteria (Desirability, Feasibility, and Viability) in the relevant questions in Step 3 of the submission service Pass / Fail
The proposal must contain a financial plan, a project plan and a resourcing plan which demonstrate how the work proposed will be completed Pass / Fail
The delivery schedule within your proposal includes evidence of a written final report Pass / Fail
The final deliverable month indicated must be less than or equal to 11 months from T0 where T0 is the project start date agreed by both parties Pass / Fail
Starting at TRL 4 at a minimum and progressing to TRL 6 at a minimum with a maximum of TRL 7 Pass / Fail
The proposal does not contain attachments that have been used for additional text data over the stated word counts in Desirability, Feasibility, Viability and Additional Information Pass / Fail
If the proposal is a resubmission of a previous one, it adheres to the resubmission guidelines Pass / Fail

If you plan to submit multiple proposals, please read this guidance carefully, as there is a limit on the number that can be submitted.

The proposal limit for this competition is 3. Any proposals submitted above the limit will be sifted out based on the order in which they were received (later submissions will be excluded)

9. How your proposal will be assessed

9.1 Stage 1

Submissions into Stage 1 of this competition will be reviewed by the customers’ competition team.

Those that are selected will be invited to submit a more detailed proposal into Stage 2.

Those not selected will receive an email notifying them alongside an indication of which of the review factors detailed in the introduction (alignment, delivery potential and meeting needs) was the main reason for not being invited into Stage 2.

No further feedback will be provided.

9.2 Stage 2

Proposals that are compliant at pre-sift in Stage 2 will be assessed against the standard UKDI assessment criteria (Desirability, Feasibility and Viability) by subject matter experts from the MOD (including Dstl), PAG and the front-line military commands. You will not have the opportunity to view or comment on assessors’ recommendations.

UKDI reserves the right to disclose on a confidential basis any information it receives from innovators during the competition process, which includes the full proposal, to any third party engaged by UKDI for the specific purpose of evaluating or assisting UKDI in the evaluation of your proposal. In providing such information you consent to such disclosure. Appropriate confidentiality agreements will be put in place.

After assessment, proposals will be discussed at a Decision Conference where funding decisions are made based on the assessments, budget and wider strategic considerations.

Innovators are not permitted to attend the Decision Conference.

9.3 Stage 2 Feedback

Proposals that are unsuccessful at Stage 2 will receive feedback in the form of bullet points and a couple of short paragraphs after the Decision Conference.

Where a proposal meets the fundable requirements for a competition at Stage 2, but is not funded, UKDI will continue to seek funding and shall consider your proposal fundable for 12 months from the date of the feedback release.

We will share the abstract, Proposal Value Proposition Statement (PVPS) and title of your proposal with PAG that may express an interest in funding the proposal through UKDI, in accordance with the competition document. We may also share this information on our cross-government Ideas Marketplace platform to foster collaboration and attempt to elicit funding. If PAG wish to read the full proposal to decide if they will fund it, we will share the full proposal with them without seeking your permission if it is within 60 days of the feedback release date. If it is over 60 days since the feedback release date we will seek your permission before sharing the full proposal with them.

For other potential funders, we will seek your permission before sharing the full proposal regardless of the number of days since the feedback release date.

In the event that funding becomes available, UKDI may ask whether you would still be prepared to undertake the work outlined in your proposal under the same terms. Your official UKDI feedback will indicate if your proposal was deemed fundable, but not awarded funding at the time.

10. UKDI Terms and Conditions

Please read the UKDI contracting guidance, which contains important information for innovators. For this competition we will be using the Innovation Standard Contract (ISC)  Terms and Conditions and work under DEFCON705. Information on the relevant DEFCONs can be found by registering on the Knowledge in Defence site.

We require unqualified acceptance of the Terms and Conditions. Where innovator organisations have a commercial department they will need to provide acceptance.

We will use deliverables from UKDI contracts in accordance with our rights detailed in the contract Terms and Conditions. This includes sharing deliverables with Five Eyes nations under the 5-POINTS Memorandum Of Understanding (MOU).

Funded projects will be allocated a Project Manager (to monitor the project) and a Technical Partner (as a technical point of contact). In addition, the UKDI team may work with an innovator to support delivery and exploitation including, when appropriate, introductions to end-users and business support to help develop their business.

For funded projects, UKDI will endeavour to provide access to the UKDI Workspace within the I-Hub, Imperial College Campus, London, as part of its wider service provision. Subject to successful vetting, Baseline Personnel Security Standard (BPSS) minimum.

This access is intended for ad hoc use only by Small and Medium-sized Enterprises (SMEs) and does not constitute a dedicated or permanent workspace. Access will be available during the term of the contract and for six months following its completion, subject to capacity and availability. Access is granted on a first come, first-served basis.

11.1 Cyber Security Model

The Cyber Security Model (CSM) is how Defence builds cyber security into its supply chain.

On receipt of a FUND decision, successful innovators (and their sub-contractors) must prove cyber resilience before the contract is awarded. The start of this process is the submission of a Supplier Assurance Questionnaire (SAQ). The SAQ allows innovators to demonstrate compliance with the specified risk level and the corresponding profile in Def Stan 05-138, and the level of control required will depend on this risk level.

To expedite the contracting time of successful innovators we ask all innovators to complete the SAQ before they submit their proposal (this is not mandated). The SAQ must be completed using the Risk Assessment reference RAR-GKPQPVM (Level 0).

The SAQ will be automatically scored against the Cyber Risk Profile (CRP) and you will be immediately informed of the outcome, compliant or not compliant.

If non-compliant, you will be required to complete a Cyber Improvement Plan (CIP) before the contract is placed which will need to be reviewed and agreed with the relevant project manager. The CIP template can be found here.

Before you start your SAQ you will need:

11.2 Export control for overseas partners

All relevant export control regulations will apply if a company ultimately wants to sell a developed solution to a foreign entity. All innovators must ensure that they can obtain, if required, the necessary export licences for their proposals and developments, such that they can be supplied to the UK and other countries. If you cannot confirm you can obtain the necessary licences as part of your proposal, you will be required to provide this information prior to contract award, should your proposal be selected for funding.