Eligibility and requirements for above ground rainwater storage tanks.
Farmers and other land managers can apply for water grants.
Read the accompanying guidance to find out more about Countryside Stewardship water grants 2015.
How much will be paid
£100 per cubic metre.
Where the item is available
This item can be used:
- to collect and store harvested rainwater; and
- only in areas targeted for the reduction of water pollution caused by agriculture.
How this option will benefit the environment
This item will collect and contain clean rainwater. This helps separate clean and dirty water and means free clean water can be used around the yard, rather than wasting potable water supplies.
If successful, this item will lead to:
- rainwater collected from roofs and buildings stored for use around the farm; and
- rainwater used for cleaning farmyards or machinery.
Applicants must send dated photographs of the existing site with their application for this item.
Check with the local planning authority to find out if planning consent is needed. Submit a copy of any planning advice, together with a copy of any consent, with the application.
With permission from Natural England, advice and consent can be received up until 29 May 2015; applicants can discuss this with their local Catchment Sensitive Farming officer.
On the land
Successful applicants will need to:
- install a new above-ground storage tank on hardstanding or concrete following the manufacturer’s instructions; and
- make sure that the work meets relevant British Standards – check the most up-to-date standards.
Applicants will need to keep:
- dated photographs of the site before and after the work has taken place (you’ll need to submit these with any claims and show them on request);
- receipted invoices and bank statements relating to this work;
- copies of photographs submitted with your application; and
- permits or consents submitted with your application.
How to carry out this option
The following section gives advice on carrying out this item successfully.
Carry out the work
There are no generic specifications for above-ground storage tanks since they are pre-made tanks supplied as fit for purpose, but the work normally includes:
- installing the tank and pump;
- a site excavation;
- creating a hardstanding or concrete base for the tank; and
- installing connecting pipework.
Throughout the work, every effort should be made so that foul or dirty water does not contaminate the clean water collected. Applicants should also check if restrictions apply to using harvested rainwater in their supply chain e.g. any farm assurance scheme or the purchasers of their produce.
Historic and archaeological features
Successful applicants should:
- get listed building consent if used close to a historic farmstead or listed building as this option may have negative effects on it;
- consider the effect of the option on the fabric and setting of the historic buildings, as well as the nature and historic value of the existing surfaces;
- avoid sites of archaeological or historic importance and have consents such as Scheduled Monument consent from English Heritage before carrying out the work; and
- consider visual intrusion and effects on landscape character particularly in designated landscapes or historic parkland
This item can’t be used for collecting dirty water, effluents and slurries.
The following items and supplements may be used on the same area as this item:
- RP15 – Concrete yard renewal
- RP16 – Rainwater goods
- RP17 – Storage tanks underground
- RP19 – First flush rainwater diverters
Follow this simple guide from the EA on implementing a water management plan
Follow this guide to find out about the effective use of water on dairy farms