© Crown copyright 2016
This publication is licensed under the terms of the Open Government Licence v3.0 except where otherwise stated. To view this licence, visit nationalarchives.gov.uk/doc/open-government-licence/version/3 or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: firstname.lastname@example.org.
Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concerned.
This publication is available at https://www.gov.uk/government/publications/tariff-quota-notice-129-2015-new-tariff-quotas-for-certain-agricultural-and-industrial-products-for-2016/tariff-quota-notice-129-2015-new-tariff-quotas-for-certain-agricultural-and-industrial-products-for-2016
New tariff quotas for certain agricultural and industrial products for 2016
Council Implementing Regulation No 2015/2448 was published in the Official Journal, L345 on 30 December 2015 . New quotas come into force on 1 January 2016.
- quota period: 1 January 2016 to 31 December 2016
- origin: NCC
- duty rate: 0%
- status: Critical
- schedule qty: See below
- documentary evidence: N990 End use authorisation where indicated (1)
|Tariff Quota Serial Number||Quota period||Schedule quantity||Duty rate||Description||Commodity codes|
|09.2637||1 January 2016 to 31 December 2016||KG||0%||Corn from corn cobs (Zea Mays Saccharata) with a diameter of 10 mm or more, but not more than 20 mm, husked, sorted, trimmed, washed, blanched, either - cooled and individually quick-frozen or - prepared or preserved otherwise than by vinegar or acetic acid, not frozen, for use in the manufacture of products of the food industry for treatment other than simple repacking||0710 40 00 10
2005 80 00 20
|09.2646||1 January 2016 to 31 December 2016||KG||0%||Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight and a melting point of 110 °C or more, but not more than 125 °C, for use in the manufacture of PVC-processing stabilizer-one packs based on powder mixtures||2918 29 00 55|
|09.2647||1 January 2016 to 31 December 2016||KG||0%||Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) - with a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and - a melting point of 49 °C or more, but not more than 54 °C, for use in the manufacture of PVC-processing stabilizer-one packs based on powder mixtures||2918 29 00 65|
|09.2648||1 January 2016 to 31 December 2016||KG||0%||Dimethyl Sulphate (CAS RN 77-78-1)||2920 90 10 70|
|09.2649||1 January 2016 to 31 December 2016||KG||0%||Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)||2921 29 00 60|
|09.2650||1 January 2016 to 31 December 2016||KG||0%||Acetophenone (CAS RN 98-86-2), with a purity by weight of 60% or more but not more than 90%||3824 90 92 87|
|09.2652||1 January 2016 to 31 December 2016||KG||0%||Refined copper foil and strips, electrolytically coated||7409 11 00 20
7410 11 00 30
|09.2662||1 January 2016 to 31 December 2016||KG||0%||Plates: consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 18.104.22.168, with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 22.214.171.124, with a comparative tracking index (CTI) of 600 or more||7410 21 00 55|
|09.2689||1 January 2016 to 31 December 2016||KG||0%||Aluminium and magnesium alloy strip or foil: in rolls, of a thickness of 0,14 mm or more but not more than 0,27 mm, a width of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50 mm or 356 mm, a tensile strength of 285 N/mm² or more, and an elongation at break of 1 % or more, and containing by weight: 93,3% or more of aluminium, 0,8% or more but not more than 5% of magnesium, and not more than 1,8% of other elements||7606 12 92 50
7607 11 90 70
|09.2690||1 January 2016 to 31 December 2016||KG||0%||Wave slide bearing for axial applications, of FeP01 steel (according to EN 10130-1991) with a sliding layer of porous sinter bronze and poly(tetrafluoroethylene), suitable for installation into motor bike suspension units||8483 30 80 20|
For details of conditions of these quotas and changes made to other existing Tariff Quotas, please view the regulation.
In any case where the information contained in this notice is at variance with that published in the Official Journal of the European Union the latter will reflect the correct legal position.
The HM Revenue and Customs Tariff, volume 1, section 1 refers.
This information should be displayed to the public upon receipt.
No public Notice or Tariff Circular will be issued.
Tariff and Quota Management Team
To find out what you can expect from us and what we expect from you go to Your Charter.