Notice of standards
Published 1 April 2022
Applies to England and Wales
© Crown copyright 2022
This publication is licensed under the terms of the Open Government Licence v3.0 except where otherwise stated. To view this licence, visit nationalarchives.gov.uk/doc/open-government-licence/version/3 or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: psi@nationalarchives.gov.uk.
Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concerned.
This publication is available at https://www.gov.uk/government/publications/boiler-upgrade-scheme-regulations-approved-standards/notice-of-standards
This notice confirms that the standards listed below are published for the purposes of Regulation 4 of ‘The Boiler Upgrade Scheme (England and Wales) Regulations 2022’.
| Regulation | Approved standards |
|---|---|
| 4(1)(a)(i) | BS EN ISO/IEC 17065:2012 Conformity assessment. Requirements for bodies certifying products, processes and services. |
| 4(1)(a)(ii) | BS EN ISO/IEC 17065:2012 Conformity assessment. Requirements for bodies certifying products, processes and services. |
| 4(1)(b) | Version 6.1 of the document entitled ‘MCS 007 Product Certification Scheme Requirements: Heat Pumps’ published on 1 December 2019. BS EN 14511-1:2018 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Terms and definitions. BS EN 14511-2:2018 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions. BS EN 14511-3:2018 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test methods. BS EN 14511-4:2018 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Requirements. |
| 4(1)(c) | Version 1.0 of the document entitled ‘MCS 026 Seasonal Coefficient of Performance Calculator’ published on 1 May 2015. BS EN 14825:2018 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance. |
| 4(1)(d) | Version 3.1 of the document entitled ‘MCS 008 Product Certification Scheme Requirements: Biomass’ published on 1 December 2019. BS EN 303-5:2021 Heating boilers - Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking. BS EN 16510-1:2018 Residential solid fuel burning appliances - General requirements and test methods. |
| 4(1)(e) | BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. |
| 4(1)(f) | BS EN 303-5:2021 Heating boilers - Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking. |
| 4(1)(g) | In relation to NOx emissions: - BS EN 14792:2017 Stationary source emissions. Determination of mass concentration of nitrogen oxides. Standard reference method. Chemiluminescence. In relation to PM emissions: - BS EN 13284-1:2017 Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method. - BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter. |
| 4(1)(h)(i) | Version 4.2 of the document entitled ‘Microgeneration Installation Standard: MIS 3004 requirements for contractors undertaking the supply, design, installation, set to work, commissioning and handover of solid biofuel heating systems’ published on 6 May 2015. |
| 4(1)(h)(ii) | Issue 1.0 of the document entitled ‘Microgeneration Installation Standard: MIS 3005-I The Heat Pump Standard (Installation)’ published on 1 December 2021. Issue 1.0 of the document entitled ‘Microgeneration Installation Standard: MIS 3005-D The Heat Pump Standard (Design)’ published on 1 December 2021. |