Skip to main content
Guidance

Managing radon measurements in multiple properties

How to arrange radon measurements for large numbers of homes or workplaces.

First, identify which properties are in a radon Affected Area and that need to be tested. This can be done by ordering a risk report or doing a Postcode List Assessment if you have a large number of buildings to assess. 

When arranging radon measurements across multiple homes or workplaces, you can order a home radon gas test kit or a workplace radon gas test kit.

You will need to decide:

  • who will manage the programme
  • whether measurements will be carried out all at once or in phases
  • who will place and collect monitors
  • who will receive results and arrange any follow-up action

Management

If you manage measurements in-house, decide who will be responsible for arranging them. This may be a central team, regional staff, or the manager or tenant of each premises. Consider whether using an external agent would be more cost-effective. 

Central organisation

Benefits:

  • can be run more efficiently with a single programme manager 
  • greater control regarding timescale and cost 
  • does not rely on varying commitment of local staff or tenants to arrange tests 

Things to consider:

  • could be a significant amount of effort for one person 
  • for workplaces, lack of local knowledge might impede choosing the right number of monitors and specific locations to test

Test schedule 

Consider whether to arrange measurements across all premises at the same time or phase the programme over several months or years. The best approach will depend on the number of premises, available resources, and budget.

Phasing 

Benefits:

  • spreads the workload - can be by administrative areas, prioritised by highest radon potential, or by sector 
  • cost can be spread over more than one financial year 

Things to consider:

  • administratively more complex 
  • undue delay in obtaining results may be challenged by the Regulatory authority 
  • could generate queries from staff/tenants awaiting tests and results

Placement and retrieval of monitors 

Decide whether test kits will be sent to a central or regional contact for distribution and retrieval, or directly to a named contact at each premises. 

Placement and retrieval by central/regional teams 

Benefits:

  • greater control over time scales for placing and removing 
  • a few people can be given extra training in the choice of locations to place monitors. 
  • fewer losses caused by lack of cooperation by employees or tenants in the individual premises 

Things to consider:

  • effort and distribution costs are higher 
  • most radon monitors have a limited shelf life once they leave the supplier and need to be placed promptly 
  • if the nominated person misunderstands the placement guidelines, many premises may have invalidated readings

Results and any actions arising 

Decide who will receive the results and who will be responsible for taking any necessary action. If results are sent to regional contacts or individual premises, consider appointing a central coordinator to oversee the programme and monitor follow-up actions. 

Results and responsibility for any action to a single nominated person 

Benefits:

  • consistent protection policy and distribution of information 
  • central accountability and control of mitigation 
  • consistent single source of records 

Things to consider:

  • could be a significant amount of effort for one person

Some of the decisions above will be dependent on finance, available effort in central/regional offices and the reliability of the occupiers of the premises being tested, whether they are employees in a workplace or tenants of domestic premises. 

During the three-month test period, you should assume that some monitors will be lost or invalidated in some way. If all the monitors in a premise are mislaid or misused, a replacement radon gas test kit will need to be arranged, adding to the cost. Using cable ties to secure the monitors and adding contact labels can help, particularly in workplaces. However, the best way to minimise the number of losses is to inform and enlist the cooperation of the people occupying the premises being tested. 

Monitor placement instructions within radon gas test kit supplied by UKHSA are simple to follow. Therefore, even if the measurements are all arranged centrally, with good communication prior to sending out the radon gas test kits, it can still be cost effective to have the kits sent direct to the premises being tested. However, we do strongly advise that the packs are addressed to a named person, not just ‘The Occupier’ or ‘Branch Manager’ etc. 

UKHSA recommends that a single person with a named deputy and possibly a small support team receives all the results and liaises with other health & safety and facilities colleagues as needed. Ideally, they would also be responsible for liaison with the appropriate regulatory authority for any premises with high radon levels. For homes this will be the Local Authority and for workplaces, the Health & Safety Executive and the local Health & Safety Inspector. 

The results should be added to any existing risk management system and the records accessible to future risk managers. Proper record keeping is important, not just for the original results, but also for noting the installation of any radon reduction systems together with maintenance dates and re-monitoring schedules. In workplaces, if exposure to high radon levels is managed by limiting occupancy within individual locations, a responsible person on site will need to be nominated to keep reliable records. 

The Radon Service Team within UKHSA has many years of experience in delivering large radon measurement programmes for both domestic and workplace premises. To find out more about how we can support your programme contact the Radon Services Team.

Contact Radon Services Team

Online enquiry form

Phone number
+44 (0) 1235 822622
(Monday to Friday, 9:00am to 4:30pm) for urgent issues

Sign up for emails or print this page