Notice

S9 1DZ, ITM Power (Trading) Limited: environmental permit application advertisement - EPR/LP3024SD/A001

Published 3 September 2024

This notice was withdrawn on

The consultation period for this application has ended. You can view current licences on the Public Registers.

Applies to England

© Crown copyright 2024

This publication is licensed under the terms of the Open Government Licence v3.0 except where otherwise stated. To view this licence, visit nationalarchives.gov.uk/doc/open-government-licence/version/3 or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: psi@nationalarchives.gov.uk.

Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concerned.

This publication is available at https://www.gov.uk/government/publications/s9-1dz-itm-power-trading-limited-environmental-permit-application-advertisement-eprlp3024sda001/s9-1dz-itm-power-trading-limited-environmental-permit-application-advertisement-eprlp3024sda001

Details of the application

The Environment Agency has received a new bespoke application for an environmental permit under the Environmental Permitting (England and Wales) Regulations 2016 from ITM Power (Trading) Limited.

Application number

EPR/LP3024SD/A001

Regulated facility type

•S4.2 A(1)(c) - coating metal sinters using platinum-based electroplating solution. •S4.2 A(1)(c) - Production of the catalyst coated membrane (CCM) using in-house formulated precious metal-based ink powders to print onto a non-metal substrate. •S4.2 A(1)(b) - The hydrochloric acid chemical milling process for removal of the metal oxide layer from Titanium.

Regulated facility address

ITM Power
Shepcote Lane
Sheffield
S9 1DZ

The application includes:

  • the completed application form
  • a non-technical summary
  • a summary of the management system
  • an environmental risk assessment
  • proposed operating techniques, including an assessment of best available techniques
  • management plans to address any key risks
  • modelling and monitoring of any significant emissions to air, land or water
  • a report on the condition of the site
  • raw material usage and measures for energy efficiency and avoiding waste production
  • an assessment of meeting the conditions for a low impact installation

How to view and comment on the application

If you have any comments on the application send these by 01 October 2024.

You can comment:

Online: view and comment on the application using Citizen Space

Via email: pscpublicresponse@environment-agency.gov.uk

For advice about how to make a representation or if you are unable to make a representation via e-mail, please call 03708 506 506.

The Environment Agency will normally put any comments it receives on the public register. This includes your name but not your personal contact details. Please tell us if you do not want your response to be public.

The privacy notice for permit applicants/operators can be viewed at Privacy Notice

Back to top