Notice

CW12 4XJ, Curzn Alloys Ltd: environmental permit application advertisement - EPR/AP3107SE/A001

Published 5 February 2021

This notice was withdrawn on

The consultation period for this application has ended. You can view current licences on the Public Registers.

Applies to England

© Crown copyright 2021

This publication is licensed under the terms of the Open Government Licence v3.0 except where otherwise stated. To view this licence, visit nationalarchives.gov.uk/doc/open-government-licence/version/3 or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: psi@nationalarchives.gov.uk.

Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concerned.

This publication is available at https://www.gov.uk/government/publications/cw12-4xj-curzn-alloys-ltd-environmental-permit-application-advertisement-eprap3107sea001/cw12-4xj-curzn-alloys-ltd-environmental-permit-application-advertisement-eprap3107sea001

Details of the application

The Environment Agency has received a new standard rules application for an environmental permit under the Environmental Permitting (England and Wales) Regulations 2016 from Curzn Alloys Ltd.

Application number

EPR/AP3107SE/A001

Regulated facility type

Low Impact Installation. Standard Rules Permit – SR2009 No.9, Section 2.2 Part A(1)(a) – Producing non-ferrous metals: Small scale foundry producing non-ferrous metal

Regulated facility address

Curzon Alloys Ltd
Radnor Park Industrial Estate
Cheshire
CW12 4XJ

The application includes:

  • the completed application form
  • a site plan
  • a report on the condition of the site
  • an assessment of meeting the conditions for a low impact installation

If you have any comments on the application send these by 05 March 2021.

You can view the details of this installation by viewing the Standard Rules details at the link below:

https://www.gov.uk/government/publications/sr2009-number-2-low-impact-part-a-installation

If you wish to comment on the application, please do so via the email address below:

pscpublicresponse@environment-agency.gov.uk

For advice about how to make a representation or if you are unable to make a representation via e-mail please call 03708 506 506.

The Environment Agency will normally put any comments it receives on the public register. This includes your name but not your personal contact details. Please tell us if you do not want your response to be public.

The privacy notice for permit applicants/operators can be viewed in the environmental permit application forms on GOV.UK

Back to top