Skip to main content
Open consultation

Annex A: Subject Level Conditions, requirements and guidance for the V Level in science research and technology

Published 12 November 2026

Applies to England

Condition VL(Science Research and Technology)1: Compliance with content requirements

VL(Science Research and Technology)1.1

In respect of each V Level in science research and technology which it makes available, or proposes to make available, an awarding organisation must –

a) comply with the requirements relating to that qualification set out in the document published by the Secretary of State entitled [x].

b) have regard to any recommendations or guidelines relating to that qualification set out in that document, and

c) interpret that document in accordance with any requirements, and having regard to any guidance, which may be published by Ofqual and revised from time to time.

VL(Science Research and Technology)1.2

An awarding organisation may expand upon the content set out in the document referred to in Condition VL(Science Research and Technology)1.1(a) so long as –

(a) no content set out in that document is removed, and

(b) any such elaboration does not cause any change to  the number of hours of Guided Learning to be assigned to the qualification.

VL(Science Research and Technology)1.3

In respect of each V Level in science research and technology which it makes available, or proposes to make available, an awarding organisation must comply with any requirements, and have regard to any guidance, relating to the objectives to be met by any assessment for that qualification which may be published by Ofqual and revised from time to time.

Condition VL(Science Research and Technology)2: Assessment

VL(Science Research and Technology)2.1

In respect of the total marks available for a V Level in science research and technology which it makes available, an awarding organisation must ensure that –

a) 40% of those marks are made available through Assessments by Examination, and

b) 60% of those marks are made available through Non-exam Assessments.

VL(Science Research and Technology)2.2

In respect of the Assessments by Examination for a V Level in science research and technology which it makes available, an awarding organisation must ensure that – 

a) a Learner takes all of those assessments in the assessment series in which the Learner requests certification for the qualification,

b) the results achieved by the Learner in the Assessments by Examination in that series are used in calculating the Learner’s overall qualification grade, and

c) it makes available one Assessment by Examination series, during the months of May and/or June, in any single academic year.

VL(Science Research and Technology)2.3

In respect of the Non-exam Assessments for a V Level in science research and technology which it makes available, an awarding organisation must ensure that – 

a) it makes available one submission window for Centres to submit marks for those assessments in each of the first and second academic years of the course for that qualification, and

b) where a Learner takes the qualification in a single academic year, the awarding organisation offers the Centre through which that Learner is taking the qualification one submission window to submit marks for that Learner’s Non-exam Assessment.

VL(Science Research and Technology)2.4

An awarding organisation must ensure that in respect of each assessment for a V Level in science research and technology which it makes available, or proposes to make available, it complies with any requirements, and has regard to any guidance, which may be published by Ofqual and revised from time to time.

Assessment objectives – V Level in science research and technology

Condition VL(Science Research and Technology)1.3 allows us to specify requirements relating to the objectives to be met by any assessment for all V Levels in science research and technology.

The assessment objectives set out below constitute requirements for the purposes of Condition VL(Science Research and Technology)1.3. These assessment objectives relate to all assessments for the qualification. Awarding organisations must comply with these requirements in relation to all V Levels in science research and technology they make available, or propose to make available.

AO1 – Demonstrate knowledge and understanding of concepts, principles, requirements and methods relevant to the subject area 25-30%
AO2 – Apply knowledge and understanding of concepts, principles, requirements and methods and to plan, carry out tasks, produce outputs, and use information appropriately 40-45%
AO3 – Analyse, interpret and evaluate information, situations and evidence to make judgements, draw conclusions and make recommendations 25-30%

Guidance in relation to the assessment objectives for V Levels in science research and technology

Condition VL(Science Research and Technology)1.3 allows us to specify guidance in relation to assessments for V Levels in science research and technology.

We set out our guidance for the purposes of Condition VL(Science Research and Technology)1.3 below.

The guidance set out below explains how we expect awarding organisations to interpret the assessment objectives in terms of:

  • the ‘elements’ within each assessment objective, that is the discrete aspects that questions/tasks could target and/or seek to credit – our expectation is that each and every question/task should target or seek to credit at least one of the elements, and may target or seek to credit multiple elements across one or more assessment objectives
  • the coverage expectations, such as in relation to the different elements within each assessment objective and how those elements should be sampled over time
  • the key areas of emphasis in each assessment objective and the particular meaning for the subject of any key terms and phrases used – defined terms are shown in bold text, followed by their definitions

AO1 – Demonstrate knowledge and understanding of concepts and principles, requirements and methods relevant to the subject area (25-30%)

Elements Coverage of elements Interpretations and definitions
1. Demonstrate knowledge and understanding of concepts and principles

2. Demonstrate knowledge and understanding of requirements

3. Demonstrate knowledge and understanding of methods
Full coverage in each set of assessments[footnote 1] (but not in every assessment).

A reasonable balance between the elements within this assessment objective.

No more than 10% of the total marks for the Assessment(s) by Examination should reward demonstrating knowledge in isolation.[footnote 2]

A reasonable balance between marks for knowledge and marks for understanding.
The focus of this assessment objective is demonstrating knowledge and understanding of what has been taught directly and specifically from the specification.

Where AO1 is assessed through a non-exam assessment, it would typically be assessed in conjunction with AO2 and/or AO3, and the conditions under which the assessment is taken must be taken into account.

Knowledge refers to facts, concepts, principles, requirements and other information from the specification. This includes, for example, identifying or stating information, definitions, features  and rules.

Understanding refers to showing awareness of the meaning, purpose or implications of knowledge, such as by explaining, describing relationships and giving reasons. This includes why something is used, how it works, and what follows from given information.

Concepts and principles, requirements and approaches are aspects of subject content. An awarding organisation should explain its approach to targeting them in its assessment strategy.

Concepts refer to the fundamental ideas and constructs that underpin scientific enquiry, research and investigation.

Principles refer to the foundational scientific and research principles that underpin reliable, safe, ethical and responsible investigation and practice.

Requirements refer to the expectations that govern scientific investigation, research and technical processes.

Methods refer to the established ways of working used in scientific investigation, research and technical activities.

AO2 – Apply knowledge and understanding of concepts, principles, requirements and methods and to plan, carry out tasks, produce outputs, and use information appropriately (40-45%)

Elements Coverage of elements Interpretations and definitions
1. Apply knowledge and understanding of concepts, principles, requirements and methods

2. Apply knowledge and understanding to plan

3. Apply knowledge and understanding to carry out tasks

4. Apply knowledge and understanding to produce outputs

5. Apply knowledge and understanding to use information appropriately
Full coverage in each set of assessments (but not in every assessment).

A reasonable balance between the elements within this assessment objective.
The focus of this assessment objective is on Learners applying their knowledge and understanding to provide meaning or explanation – for instance, to connect theory with particular contexts, stimuli or materials. This application should relate principally to:

• novel situations that are not clearly indicated in the specification;
• developing further material that is covered in the specification;
• making links between such types of material, which are not signalled in the specification.
• Application of knowledge should also involve determining how to make sense of connections and linkages within data, information and detail - although not to the extent of drawing conclusions or making judgements.

Plan refers to identifying the purpose and requirements of an applied task and determining the steps, information and resources needed before acting.

Carry out tasks refers to undertaking applied scientific and technical activities within research or work-related contexts.

Produce outputs refers to generating outputs that arise from applied scientific and technical tasks.

Use information appropriately refers to handling and communicating scientific and technical information and data accurately and appropriately for the intended purpose, audience and context.

AO3 – Analyse, interpret and evaluate information, situations and evidence to make judgements, draw conclusions and make recommendations (25-30%)

Elements Coverage of elements Interpretations and definitions
1. Analyse, interpret and evaluate information, situations and evidence to make judgements

2. Analyse, interpret and evaluate information, situations and evidence to draw conclusions

3. Analyse, interpret and evaluate information, situations and evidence to make recommendations
Full coverage in each set of assessments (but not in every assessment).

A reasonable balance between the elements within this assessment objective.
Information refers to scientific and technical information or data obtained from investigations, research or relevant sources.

Situations refer to scientific research and/or technical scenarios, circumstances or contexts.

Evidence refers to information that can be used to support analysis and evaluation.

Make judgements refers to forming evidence-based views by analysing and evaluating scientific and technical information, situations and evidence.

Draw conclusions refers to determining findings or outcomes from the analysis and evaluation of relevant information, situations and evidence.

Make recommendations refers to proposing justified actions or options informed by analysis, evaluation and interpretation of relevant information, situations and evidence.
  1. For the purposes of this guidance, a ‘set of assessments’ means the assessments to be taken by a particular Learner for a V Level in science research and technology. For clarity, the assessments taken by Learners may vary, depending on any possible routes through the qualification. ↩

  2. Marks which ‘reward demonstrating knowledge in isolation’ means any mark awarded solely for recalling facts or other knowledge that is part of the specification. It does not include marks awarded for selecting appropriate knowledge (for example, to evidence an argument), or for applying knowledge to a particular context. ↩