Skip to main content
Research and analysis

Environmental exposure scenarios for tyre-related pollution from roads: summary

Published 19 November 2026

Applies to England

1. Chief Scientist’s Group report summary

The aim of this project was to develop an environmental exposure model for the release and distribution of tyre-derived rubber particles from roads, and the substances leached from them. This was based on a review of published information on factors expected to influence release.

1.1 Background

Tyres are essential to modern society and are used in great numbers – it was estimated by the British Tyre Manufacturers Association that almost 50 million tyres are supplied in the United Kingdom annually.

The surface of a tyre is gradually abraded by friction with the road during use, giving rise to small particles of rubber which contribute significantly to the load of microplastics and nanoplastics in the environment. Tyre chemicals can leach from these particles, and research published in the last five years has identified 6PPD-Q, a degradation product of the tyre additive 6PPD, as the cause of significant fish mortality in North America. We therefore wanted to develop a model to help assess potential environmental risks from different tyre additives in a consistent way.

1.2 Approach

We reviewed information on the chemical content of tyre rubber as well as traffic volumes, vehicle types, road environments, tyre wear rates and rainfall events. Collation of these data from the scientific literature was complicated by inconsistent methods, terminology and reporting. The resulting parameterised model predicts the release of tyre-derived rubber particles and leached substances on both an annual and short-term (rainfall event) basis. This information can be used to assess acute and chronic aquatic risks arising from vehicle tyres. A case study was conducted for a 1 km stretch of the M6 motorway in Cumbria, next to the River Lune.

1.3 Results

Exposure scenarios and models were developed for local and regional scales. The models included the capability for users to adjust the parameter values to account for the specifics of the location being modelled, including road type, traffic volume, rainfall frequency and mitigation measures. The models produce masses of substances that can be entered into environmental exposure modelling software to calculate predicted environmental concentrations (PECs). For example, 1.2 tonnes of 6PPD-Q is calculated to be released into watercourses in Great Britain (GB) annually, which can be used as the input mass for further modelling.

The regional exposure scenario estimated that 54,400 tonnes of tyre derived rubber particles are released to the GB environment annually. Within the case study, the model estimated that 1.9 kg of rubber particles could be released to the River Lune during a period of heavy rain following a three-day dry-period, resulting in releases of around 4.7 g of 6PPD and 0.6 g of 6PPD‑Q. Aquatic PECs of 0.2 – 2.5 µg/L and 0.02 – 0.3 µg/L were calculated respectively, depending on the flow rate of the receiving river.

1.4 Conclusions

We have developed local and regional exposure scenarios and an accompanying model to estimate the release of rubber particles and subsequent leachate from vehicles in GB into different environmental compartments. The model is intended for use as a screening tool by regulators, academics and industry to understand which tyre-related chemicals are a priority for further investigation. It may also be used as part of investigations at specific sites. A series of recommendations are made including refinement of atmospheric transport within the exposure scenarios and consideration of a targeted monitoring programme to determine environmental concentrations of tyre-related chemicals.

1.5 Publication details

This summary relates to information reported in detail in the following output:

This project was commissioned by the Environment Agency’s Chief Scientist’s Group, which provides scientific knowledge, tools and techniques to enable us to protect and manage the environment as effectively as possible.

Enquiries: research@environment-agency.gov.uk.

© Environment Agency