Skip to main content
Regulation

The Carbon Border Adjustment Mechanism (Default Values) Force of Law Notice (Draft)

Updated 16 October 2026

Notice Made Under Primary Legislation

Where possible, actual verified emissions data is preferable to use for UK Carbon Border Adjustment Mechanism (CBAM). However, default values are available to ensure liable persons can comply with CBAM, even where actual reported emissions data is not available. The government’s guiding principle in setting default values is to protect the environmental integrity of the CBAM and ensure that there is no advantage to liable persons in using default values, rather than determining the actual embodied emissions of imported CBAM goods.

Default values for UK CBAM are based on EU data, which was calculated to reflect the same CBAM system boundaries as the UK. The UK’s default values have been set on a trade-weighted average basis, meaning the values reflect the composition of UK imports. Data from the EU is excluded. This helps to ensure the values better reflect the emissions embodied in goods for which the default values are most likely to be used, as well as recognising the commitment expressed by the UK and EU to link their emissions trading schemes which will result in EU-origin goods being exempt from UK CBAM.

A markup on default values helps to balance supporting the objectives of the CBAM and facilitating a transition to actual emissions reporting. On that basis, a markup of 10% has been applied in all sectors except fertiliser, where no markup is applied.

These default values will be in force from 1 January 2027 to 31 December 2028. From 2029, the UK will move to country-specific default values, with one default value per CBAM good per country. This will help to provide a more granular and accurate reflection of the emissions embodied in CBAM goods. The appropriate level of markup will be reviewed at this time.

These default values will be updated in due course as necessary to account for any future changes to the Combined Nomenclature system.

The following text has the force of law by virtue of paragraph 11(1) of Schedule 17 to the Finance Act 2026.

Aluminium default values

Open the find and search function on your device and enter the CN code to find the default value you need.

Combined Nomenclature (CN) code Combined Nomenclature (CN) description Default value (tonnes of carbon dioxide equivalent (tCO2e) per tonne of product)
76011010 Aluminium slabs, not alloyed, unwrought 2.058 tCO2e per tonne
76011090 Aluminium, not alloyed, unwrought (excluding slabs) 2.136 tCO2e per tonne
76012030 Unwrought aluminium alloys in the form of slabs 2.038 tCO2e per tonne
76012040 Unwrought aluminium alloys in the form of billets 2.030 tCO2e per tonne
76012080 Unwrought aluminium alloys (excluding slabs and billets) 2.121 tCO2e per tonne
76031000 Powders of aluminium, of non-lamellar structure (excluding pellets of aluminium) 3.364 tCO2e per tonne
76032000 Powders of aluminium, of lamellar structure, and flakes of aluminium (excluding pellets of aluminium, and spangles) 2.886 tCO2e per tonne
76041010 Bars, rods and profiles, of non-alloy aluminium 3.021 tCO2e per tonne
76041090 Profiles of non-alloy aluminium, not elsewhere specified 4.265 tCO2e per tonne
76042100 Hollow profiles of aluminium alloys, not elsewhere specified 3.894 tCO2e per tonne
76042910 Bars and rods of aluminium alloys 3.365 tCO2e per tonne
76042990 Solid profiles, of aluminium alloys, not elsewhere specified 4.014 tCO2e per tonne
76051100 Wire of non-alloy aluminium, with a maximum cross-sectional dimension of greater than 7mm (excluding stranded wire, cables, plaited bands and the like and other articles of heading 7614, and electrically insulated wires) 2.360 tCO2e per tonne
76051900 Wire of non-alloy aluminium, with a maximum cross-sectional dimension of less than or equal to 7mm (other than stranded wires, cables, ropes and other articles of heading 7614, electrically insulated wires, strings for musical instruments) 3.151 tCO2e per tonne
76052100 Wire of aluminium alloys, with a maximum cross-sectional dimension of greater than 7mm (excluding stranded wire, cables, plaited bands and the like and other articles of heading 7614, and electrically insulated wires) 2.833 tCO2e per tonne
76052900 Wire, of aluminium alloys, having a maximum cross-sectional dimension of less than or equal to 7mm (other than stranded wires, cables, ropes and other articles of heading 7614, electrically insulated wires, strings for musical instruments) 4.005 tCO2e per tonne
76061130 Aluminium Composite Panel, of non-alloy aluminium, of a thickness of greater than 0.2mm 4.522 tCO2e per tonne
76061150 Plates, sheets and strip, of non-alloy aluminium, of a thickness of greater than 0.2mm, square or rectangular, painted, varnished or coated with plastics (excluding Aluminium Composite Panel) 4.476 tCO2e per tonne
76061191 Plates, sheets and strip, of non-alloy aluminium, of a thickness of greater than 0.2mm but less than 3mm, square or rectangular (excluding such products painted, varnished or coated with plastics, and expanded plates, sheets and strip) 3.388 tCO2e per tonne
76061193 Plates, sheets and strip, of non-alloy aluminium, of a thickness of greater than or equal to 3mm but less than 6mm, square or rectangular (excluding such products painted, varnished or coated with plastics) 3.946 tCO2e per tonne
76061199 Plates, sheets and strip, of non-alloy aluminium, of a thickness of greater than or equal to 6mm, square or rectangular (excluding such products painted, varnished or coated with plastics) 4.176 tCO2e per tonne
76061211 Beverage can body stock, of aluminium alloys, of a thickness of greater than 0.2mm 4.219 tCO2e per tonne
76061219 Beverage can end stock and tab stock, of aluminium alloys, of a thickness of greater than 0.2mm 3.067 tCO2e per tonne
76061230 Aluminium Composite Panel, of aluminium alloys, of a thickness of greater than 0.2mm 4.416 tCO2e per tonne
76061250 Plates, sheets and strip, of aluminium alloys, of a thickness of greater than 0.2mm, square or rectangular, painted, varnished or coated with plastics (excluding beverage can body stock, end stock and tab stock, and Aluminium Composite Panel) 4.418 tCO2e per tonne
76061292 Plates, sheets and strip, of aluminium alloys, of a thickness of greater than 0.2mm but less than 3mm, square or rectangular (excluding painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock) 3.397 tCO2e per tonne
76061293 Plates, sheets and strip, of aluminium alloys, of a thickness of greater than or equal to 3mm but less than 6mm, square or rectangular (excluding such products painted, varnished or coated with plastics) 3.950 tCO2e per tonne
76061299 Plates, sheets and strip, of aluminium alloys, of a thickness of greater than or equal to 6mm, square or rectangular (excluding such products painted, varnished or coated with plastics) 3.691 tCO2e per tonne
76069100 Plates, sheets and strip, of non-alloy aluminium, of a thickness of greater than 0.2mm (other than square or rectangular) 4.167 tCO2e per tonne
76069200 Plates, sheets and strip, of aluminium alloys, of a thickness of greater than 0.2mm (other than square or rectangular) 2.962 tCO2e per tonne
76071111 Aluminium foil, not backed, rolled but not further worked, of a thickness of less than 0.021mm, in rolls of a weight of less than or equal to 10kg (excluding stamping foils of heading 3212, and foil made up as Christmas tree decorating material) 3.505 tCO2e per tonne
76071119 Aluminium foil, not backed, rolled but not further worked, of a thickness of less than 0.021mm (excluding stamping foils of heading 3212, and foil made up as Christmas tree decorating material and in rolls of a weight less than or equal to 10kg) 5.248 tCO2e per tonne
76071190 Aluminium foil, not backed, rolled but not further worked, of a thickness of greater than or equal to 0.021mm but less than or equal to 0.2mm (excluding stamping foils of heading 3212, and foil made up as Christmas tree decorating material) 4.107 tCO2e per tonne
76071910 Aluminium foil, not backed, rolled and further worked, of a thickness of less than 0.021mm (excluding stamping foils of heading 3212, and foil made up as Christmas tree decorating material) 5.342 tCO2e per tonne
76071990 Aluminium foil, not backed, rolled and further worked, of a thickness (excluding any backing) from 0.021mm to 0.2mm (excluding stamping foils of heading 3212, and foil made up as Christmas tree decorating material) 5.397 tCO2e per tonne
76072010 Aluminium foil, backed, of a thickness (excluding any backing) of less than 0.021mm (excluding stamping foils of heading 3212, and foil made up as Christmas tree decorating material) 3.256 tCO2e per tonne
76072091 Aluminium Composite Panel, of a thickness less than or equal to 0.2mm 6.023 tCO2e per tonne
76072099 Aluminium foil, backed, of a thickness (excluding any backing) of greater than or equal to 0.021mm but less than or equal to 0.2mm (excluding stamping foils of heading 3212, foil made up as Christmas tree decorating material, and Aluminium Composite Panel) 4.193 tCO2e per tonne
76081000 Tubes and pipes of non-alloy aluminium (excluding hollow profiles) 4.556 tCO2e per tonne
76082020 Tubes and pipes of aluminium alloys, welded (excluding hollow profiles) 4.816 tCO2e per tonne
76082081 Tubes and pipes of aluminium alloys, not further worked than extruded (excluding hollow profiles) 2.984 tCO2e per tonne
76082089 Tubes and pipes of aluminium alloys (excluding such products welded or not further worked than extruded, and hollow profiles) 3.359 tCO2e per tonne
76090000 Aluminium tube or pipe fittings “for example, couplings, elbows, sleeves” 4.349 tCO2e per tonne
76101000 Doors, windows and their frames and thresholds for door, of aluminium (excluding door furniture) 4.847 tCO2e per tonne
76109010 Bridges and bridge-sections, towers and lattice masts, of aluminium 3.987 tCO2e per tonne
76109090 Structures and parts of structures, of aluminium, not elsewhere specified, and plates, rods, profiles, tubes and the like, prepared for use in structures, of aluminium, not elsewhere specified (excluding prefabricated buildings of heading 9406, doors and windows and their frames and thresholds for doors, bridges and bridge-sections, towers and lattice masts) 4.791 tCO2e per tonne
76110000 Reservoirs, tanks, vats and similar containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of greater than 300l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excluding containers specifically constructed or equipped for one or more types of transport) 5.054 tCO2e per tonne
76121000 Collapsible tubular containers, of aluminium 4.596 tCO2e per tonne
76129020 Containers of a kind used for aerosols, of aluminium 4.288 tCO2e per tonne
76129030 Casks, drums, cans, boxes and similar containers, of aluminium, manufactured from foil of a thickness less than or equal to 0.2mm 4.430 tCO2e per tonne
76129080 Casks, drums, cans, boxes and similar containers less than or equal to 300l, of aluminium, for any material (other than compressed or liquefied gas), not elsewhere specified (other than collapsible tubular containers, containers for aerosols and containers manufactured from foil of a thickness less than or equal to 0.2mm 4.887 tCO2e per tonne
76130000 Aluminium containers for compressed or liquefied gas 2.417 tCO2e per tonne
76141000 Stranded wire, cables, plaited bands and the like, of aluminium, with steel core (excluding such products electrically insulated) 3.742 tCO2e per tonne
76149000 Stranded wires, cables, ropes and similar articles, of aluminium (other than with steel core and electrically insulated products) 3.217 tCO2e per tonne
76161000 Nails, tacks, staples, screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles, of aluminium (excluding staples in strips, plugs, bungs and the like, threaded) 4.888 tCO2e per tonne
76169100 Cloth, grill, netting and fencing, of aluminium wire (excluding cloth of metal fibres for clothing, lining and similar uses, and cloth, grill and netting made into hand sieves or machine parts) 5.768 tCO2e per tonne
76169910 Articles of aluminium, cast, not elsewhere specified 4.547 tCO2e per tonne
76169990 Articles of aluminium, uncast, not elsewhere specified 5.684 tCO2e per tonne

Cement default values

Open the find and search function on your device and enter the CN code to find the default value you need.

Combined Nomenclature (CN) code Combined Nomenclature (CN) description Default value (tonnes of carbon dioxide equivalent (tCO2e) per tonne of product)
25070080 Kaolinic clays (other than kaolin) 0.240 tCO2e per tonne
25231000 Cement clinkers 1.433 tCO2e per tonne
25232100 White Portland cement, whether or not artificially coloured 1.425 tCO2e per tonne
25232900 Portland cement (excluding white, whether or not artificially coloured) 1.375 tCO2e per tonne
25233000 Aluminous cement 2.075 tCO2e per tonne
25239000 Cement, whether or not coloured (excluding Portland cement and aluminous cement) 1.441 tCO2e per tonne

Fertilisers default values

Open the find and search function on your device and enter the CN code to find the default value you need.

Combined Nomenclature (CN) code Combined Nomenclature (CN) description Default value (tonnes of carbon dioxide equivalent (tCO2e) per tonne of product)
28080000 Nitric acid; sulphonitric acids 2.048 tCO2e per tonne
28141000 Anhydrous ammonia 2.434 tCO2e per tonne
28142000 Ammonia in aqueous solution 0.999 tCO2e per tonne
28342100 Nitrate of potassium 1.813 tCO2e per tonne
31021012 Urea in aqueous solution, containing greater than 45% nitrogen in relation to the weight of the dry product and containing equal to or greater than 31.8% but less than or equal to 33.2% by weight of urea (excluding that in packages with a gross weight of less than or equal to 10kg) 0.457 tCO2e per tonne
31021015 Urea in aqueous solution, containing greater than 45% nitrogen in relation to the weight of the dry product and containing greater than 33.2% but less than or equal to 55% by weight of urea (excluding that in packages with a gross weight of less than or equal to 10kg) 0.753 tCO2e per tonne
31021019 Urea, whether or not in aqueous solution, containing greater than 45% nitrogen in relation to the weight of the dry product (excluding that in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg, or in aqueous solution containing equal to or greater than 31.8% but less than or equal to 55% by weight of urea) 1.392 tCO2e per tonne
31021090 Urea, whether or not in aqueous solution, containing less than or equal to 45% by weight of nitrogen on the dry anhydrous product (excluding goods of this chapter in tablets or similar forms or in packages of a gross weight of less than or equal to 10kg) 1.773 tCO2e per tonne
31022100 Ammonium sulphate (excluding that in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 1.107 tCO2e per tonne
31022900 Double salts and mixtures of ammonium sulphate and ammonium nitrate (excluding goods of this chapter in tablets or similar forms or in packages of a gross weight of less than or equal to 10kg) 1.460 tCO2e per tonne
31023010 Ammonium nitrate in aqueous solution (excluding that in packages with a gross weight of less than or equal to 10kg) 1.485 tCO2e per tonne
31023090 Ammonium nitrate (excluding that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 2.600 tCO2e per tonne
31024010 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing less than or equal to 28% nitrogen by weight (excluding those in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 2.120 tCO2e per tonne
31024090 Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing greater than 28% nitrogen by weight (excluding those in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 1.978 tCO2e per tonne
31025000 Sodium nitrate (excluding that in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 3.247 tCO2e per tonne
31026000 Double salts and mixtures of calcium nitrate and ammonium nitrate (excluding those in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 2.698 tCO2e per tonne
31028000 Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excluding those in packages with a gross weight of less than or equal to 10kg) 1.589 tCO2e per tonne
31029000 Mineral or chemical nitrogen fertilisers (excluding urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages less than or equal to 10kg) 1.953 tCO2e per tonne
31051000 Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg 0.892 tCO2e per tonne
31052010 Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content greater than 10% by weight on the dry anhydrous product (excluding those in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 1.017 tCO2e per tonne
31052090 Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content less than or equal to 10% by weight on the dry anhydrous product (excluding those in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 0.677 tCO2e per tonne
31053000 Diammonium hydrogenorthophosphate “diammonium phosphate” (excluding that in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 0.481 tCO2e per tonne
31054000 Ammonium dihydrogenorthophosphate “monoammonium phosphate”, whether or not mixed with diammonium hydrogenorthophosphate “diammonium phosphate” (excluding that in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 0.522 tCO2e per tonne
31055100 Mineral or chemical fertilisers containing nitrates and phosphates (excluding ammonium dihydrogenorthophosphate “Monoammonium phosphate”, diammonium hydrogenorthophosphate “Diammonium phosphate”, and those in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 1.404 tCO2e per tonne
31055900 Mineral or chemical fertilisers containing the two fertilising elements nitrogen (excluding nitrate) and phosphorus but not nitrates (excluding ammonium dihydrogenorthophosphate “monoammonium phosphate”, diammonium hydrogenorthophosphate “diammonium phosphate” in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 0.765 tCO2e per tonne
31059020 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, including mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing greater than 10% nitrogen by weight (excluding in tablets or similar forms, or in packages with a gross weight of less than or equal to 10kg) 1.704 tCO2e per tonne
31059080 Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, including mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of less than or equal to 10% (excluding in tablets or similar forms or in packages of a gross weight of less than or equal to 10kg) 0.776 tCO2e per tonne

Hydrogen default values

Open the find and search function on your device and enter the CN code to find the default value you need.

Combined Nomenclature (CN) code Combined Nomenclature (CN) description Default value (tonnes of carbon dioxide equivalent (tCO2e) per tonne of product)
28041000 Hydrogen 28.378 tCO2e per tonne

Iron and steel default values

Open the find and search function on your device and enter the CN code to find the default value you need.

Combined Nomenclature (CN) code Combined Nomenclature (CN) description Default value (tonnes of carbon dioxide equivalent (tCO2e) per tonne of product)
26011200 Agglomerated iron ores and concentrates (excluding roasted iron pyrites) 0.494 tCO2e per tonne
72011011 Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight less than or equal to 0.5% phosphorus, greater than or equal to 0.4% manganese and less than or equal to 1% silicon 1.331 tCO2e per tonne
72011019 Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight less than or equal to 0.5% phosphorus, greater than or equal to 0.4% manganese and greater than 1% silicon 1.539 tCO2e per tonne
72011030 Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight less than or equal to 0.5% phosphorus, and greater than or equal to 0.1% but less than 0.4% manganese 2.445 tCO2e per tonne
72011090 Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight less than or equal to 0.5% phosphorus, and less than or equal to 0.1% manganese 2.698 tCO2e per tonne
72012000 Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight greater than or equal to 0.5% phosphorus 1.920 tCO2e per tonne
72015010 Alloy pig iron in pigs, blocks or other primary forms, containing by weight greater than or equal to 0.3% but less than or equal to 1% titanium and greater than or equal to 0.5% but less than or equal to 1% vanadium 2.054 tCO2e per tonne
72015090 Alloy pig iron and spiegeleisen, in pigs, blocks or other primary forms (excluding alloy iron containing, by weight, greater than or equal to 0.3% but less than or equal to 1% titanium and greater than or equal to 0.5% but less than or equal to 1% vanadium) 1.739 tCO2e per tonne
72021120 Ferro-manganese, containing by weight greater than 2% carbon, with a granulometry less than or equal to 5mm and a manganese content by weight greater than 65% 1.859 tCO2e per tonne
72021180 Ferro-manganese, containing by weight greater than 2% carbon (excluding ferro-manganese with a granulometry of less than or equal to 5mm and containing by weight greater than 65% manganese) 1.859 tCO2e per tonne
72021900 Ferro-manganese, containing by weight less than or equal to 2% carbon 6.149 tCO2e per tonne
72024110 Ferro-chromium, containing by weight greater than 4% but less than or equal to 6% carbon 2.585 tCO2e per tonne
72024190 Ferro-chromium, containing by weight greater than 6% carbon 2.585 tCO2e per tonne
72024910 Ferro-chromium, containing by weight less than or equal to 0.05% carbon 3.157 tCO2e per tonne
72024950 Ferro-chromium, containing by weight greater than 0.05% but less than or equal to 0.5% carbon 3.157 tCO2e per tonne
72024990 Ferro-chromium, containing by weight greater than 0.5% but less than or equal to 4% carbon 3.157 tCO2e per tonne
72026000 Ferro-nickel 5.502 tCO2e per tonne
72031000 Ferrous products obtained by direct reduction of iron ore, in lumps, pellets or similar forms 1.149 tCO2e per tonne
72039000 Spongy ferrous products, obtained from molten pig iron by atomisation, iron of a purity of greater than or equal to 99.94%, in lumps, pellets or similar forms 1.467 tCO2e per tonne
72051000 Granules, of pig iron, spiegeleisen, iron or steel (excluding granules of ferro-alloys, turnings and filings of iron or steel, certain small calibre items, defective balls for ball-bearings) 2.994 tCO2e per tonne
72052100 Powders, of alloy steel (excluding powders of ferro-alloys and radioactive iron powders “isotopes”) 2.478 tCO2e per tonne
72052900 Powders, of pig iron, spiegeleisen, iron or non-alloy steel (excluding powders of ferro-alloys and radioactive iron powders “isotopes”) 2.664 tCO2e per tonne
72061000 Ingots, of iron and non-alloy steel (excluding remelted scrap ingots, continuous cast products, iron of heading 7203) 1.915 tCO2e per tonne
72069000 Iron and non-alloy steel, in puddled bars or other primary forms (excluding ingots, remelted scrap ingots, continuous cast products, iron of heading 7203) 1.673 tCO2e per tonne
72071111 Semi-finished products, of non-alloy free-cutting steel, containing by weight less than 0.25% carbon, of square or rectangular cross-section, the width less than twice the thickness, rolled or obtained by continuous casting 3.469 tCO2e per tonne
72071114 Semi-finished products, of iron or non-alloy steel, containing by weight less than 0.25% carbon, of square or rectangular cross-section, the width less than twice the thickness of less than or equal to 130mm, rolled or obtained by continuous casting (excluding free-cutting steel) 2.856 tCO2e per tonne
72071116 Semi-finished products, of iron or non-alloy steel, containing by weight less than 0.25% carbon, of square or rectangular cross-section, the width less than twice the thickness of greater than 130mm, rolled or obtained by continuous casting (excluding free-cutting steel) 3.590 tCO2e per tonne
72071190 Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% carbon, of rectangular cross-section, the width less than twice the thickness, forged 2.803 tCO2e per tonne
72071210 Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon, of rectangular “other than square” cross-section, the width measuring greater than or equal to twice the thickness, rolled or obtained by continuous casting 3.571 tCO2e per tonne
72071290 Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% carbon, of rectangular “other than square” cross-section, the width greater than or equal to twice the thickness, forged 4.748 tCO2e per tonne
72071912 Semi-finished products, of iron or non-alloy steel, containing by weight less than 0.25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3.595 tCO2e per tonne
72071919 Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% carbon, of circular or polygonal cross-section, forged 3.792 tCO2e per tonne
72071980 Semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% carbon (excluding semi-products, of square, rectangular, circular or polygonal cross-section) 3.600 tCO2e per tonne
72072011 Semi-finished products, of non-alloy free-cutting steel, containing by weight greater than or equal to 0.25% carbon, of square or rectangular cross-section, the width less than twice the thickness, rolled or obtained by continuous casting 2.486 tCO2e per tonne
72072015 Semi-finished products of iron or non-alloy steel, containing by weight greater than or equal to 0.25% but less than 0.6% carbon, of square or rectangular cross-section, the width less than twice the thickness, rolled or obtained by continuous casting (excluding free-cutting steel) 4.504 tCO2e per tonne
72072017 Semi-finished products of iron or non-alloy steel, containing by weight greater than or equal to 0.6% carbon, of square or rectangular cross-section, the width less than twice the thickness, rolled or obtained by continuous casting (excluding free-cutting steel) 4.435 tCO2e per tonne
72072019 Semi-finished products of iron or non-alloy steel, containing by weight greater than or equal to 0.25% carbon, of square or rectangular cross-section, the width less than twice the thickness, forged 3.645 tCO2e per tonne
72072032 Semi-finished products of iron or non-alloy steel, containing by weight greater than or equal to 0.25% of carbon, of rectangular “other than square” cross-section, the width measuring greater than or equal to twice the thickness, rolled or obtained by continuous casting 3.994 tCO2e per tonne
72072039 Semi-finished products of iron or non-alloy steel, containing by weight greater than or equal to 0.25% carbon, of rectangular “other than square” cross-section and the width greater than or equal to twice the thickness, forged 4.752 tCO2e per tonne
72072052 Semi-finished products of iron or non-alloy steel, containing by weight greater than or equal to 0.25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting 3.489 tCO2e per tonne
72072059 Semi-finished products of iron or non-alloy steel, containing by weight greater than or equal to 0.6% carbon, of circular or polygonal cross-section, forged 3.763 tCO2e per tonne
72072080 Semi-finished products of iron or non-alloy steel, containing by weight greater than or equal to 0.25% carbon (excluding those of square, rectangular, circular or polygonal cross-section) 3.521 tCO2e per tonne
72081000 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process 2.722 tCO2e per tonne
72082500 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than or equal to 4.75mm, pickled, without patterns in relief 2.823 tCO2e per tonne
72082600 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than or equal to 3mm but less than 4.75mm, pickled, without patterns in relief 3.070 tCO2e per tonne
72082700 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of less than 3mm, pickled, without patterns in relief 2.649 tCO2e per tonne
72083600 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than or equal to 10mm, not pickled, without patterns in relief 3.240 tCO2e per tonne
72083700 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than or equal to 4.75mm but less than 10mm, not pickled, without patterns in relief 3.314 tCO2e per tonne
72083800 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than or equal to 3mm but less than 4,75mm, not pickled, without patterns in relief 3.778 tCO2e per tonne
72083900 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of less than 3mm, not pickled, without patterns in relief 3.468 tCO2e per tonne
72084000 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process 2.987 tCO2e per tonne
72085120 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than 15mm, without patterns in relief 2.941 tCO2e per tonne
72085191 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 2.050mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than 10mm but less than or equal to 15mm, without patterns in relief (excluding “wide flats”) 2.923 tCO2e per tonne
72085198 Flat-rolled products of iron or non-alloy steel, of a width of less than 2.050mm but greater than or equal to 600mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than 10mm but less than or equal to 15mm, without patterns in relief 2.582 tCO2e per tonne
72085210 Flat-rolled products of iron or non-alloy steel, of a width of less than or equal to 1.250mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of greater than or equal to 4.75mm but less than or equal to 10mm, without patterns in relief 4.316 tCO2e per tonne
72085291 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 2.050mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than or equal to 4.75mm but less than or equal to 10mm, without patterns in relief 3.555 tCO2e per tonne
72085299 Flat-rolled products of iron or non-alloy steel, of a width of less than 2.050mm but greater than or equal to 600mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than or equal to 4.75mm but less than or equal to 10mm, without patterns in relief (excluding rolled on four faces or in a closed bow pass of a width less than or equal to 1.250mm) 2.687 tCO2e per tonne
72085310 Flat-rolled products of iron or non-alloy steel, of a width of less than or equal to 1.250mm, not in coils, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a thickness of greater than or equal to 4mm but less than 4.75mm, without patterns in relief 2.674 tCO2e per tonne
72085390 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of greater than or equal to 3mm but less than 4.75mm, without patterns in relief (excluding rolled on four faces or in a closed bow pass of a width less than or equal to 1.250mm and of a thickness of greater than or equal to 4mm) 2.671 tCO2e per tonne
72085400 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of less than 3mm, without patterns in relief 2.671 tCO2e per tonne
72089020 Flat-rolled products of iron or steel, of a width greater than or equal to 600mm, hot-rolled and further worked, but not clad, plated or coated, perforated 4.675 tCO2e per tonne
72089080 Flat-rolled products of iron or steel, of a width greater than or equal to 600mm, hot-rolled and further worked, but not clad, plated or coated, non-perforated 3.562 tCO2e per tonne
72091500 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of greater than or equal to 3mm 2.842 tCO2e per tonne
72091610 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply cold-rolled “cold-reduced”, of a thickness of greater than 1mm but less than 3mm “electrical” 2.358 tCO2e per tonne
72091690 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of greater than 1mm but less than 3mm (excluding electrical) 2.806 tCO2e per tonne
72091710 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply cold-rolled “cold-reduced”, of a thickness of greater than or equal to 0.5mm but less than or equal to 1mm “electrical” 2.395 tCO2e per tonne
72091790 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of greater than or equal to 0.5mm but less than or equal to 1mm (excluding electrical) 2.648 tCO2e per tonne
72091810 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply cold-rolled “cold-reduced”, of a thickness of less than 0.5mm “electrical” 3.887 tCO2e per tonne
72091891 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of greater than or equal to 0.35mm but less than 0.5mm (excluding electrical) 2.411 tCO2e per tonne
72091899 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of less than 0.35mm (excluding electrical) 1.584 tCO2e per tonne
72092500 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of greater than or equal to 3mm 3.521 tCO2e per tonne
72092610 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply cold-rolled “cold-reduced”, of a thickness of greater than 1mm but less than 3mm “electrical” 3.526 tCO2e per tonne
72092690 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of greater than 1mm but less than 3mm (excluding electrical) 3.524 tCO2e per tonne
72092710 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply cold-rolled “cold-reduced”, of a thickness of greater than or equal to 0.5mm but less than or equal to 1mm “electrical” 3.526 tCO2e per tonne
72092790 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of greater than or equal to 0.5mm but less than or equal to 1mm (excluding electrical) 2.838 tCO2e per tonne
72092810 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply cold-rolled “cold-reduced”, of a thickness of less than 0.5mm “electrical” 3.887 tCO2e per tonne
72092890 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, not in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of less than 0.5mm (excluding electrical) 4.511 tCO2e per tonne
72099020 Flat-rolled products of iron or steel, of a width of greater than or equal to 600mm, cold-rolled “cold-reduced” and further worked, but not clad, plated or coated, perforated 3.346 tCO2e per tonne
72099080 Flat-rolled products of iron or steel, of a width of greater than or equal to 600mm, cold-rolled “cold-reduced” and further worked, but not clad, plated or coated, non-perforated 2.662 tCO2e per tonne
72101100 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, tinned, of a thickness of greater than or equal to 0.5mm 2.636 tCO2e per tonne
72101220 Tinplate of iron or non-alloy steel, of a width of greater than or equal to 600mm and of a thickness of less than 0.5mm, tinned [coated with a layer of metal containing, by weight, greater than or equal to 97% of tin], not further worked than surface-treated 3.379 tCO2e per tonne
72101280 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with tin, of a thickness of less than 0.5mm (excluding tinplate) 3.526 tCO2e per tonne
72102000 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with lead, including terne-plate 3.043 tCO2e per tonne
72103000 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, electrolytically plated or coated with zinc 2.458 tCO2e per tonne
72104100 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, corrugated, plated or coated with zinc (excluding electrolytically plated or coated with zinc) 3.055 tCO2e per tonne
72104900 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, not corrugated, plated or coated with zinc (excluding electrolytically plated or coated with zinc) 3.049 tCO2e per tonne
72105000 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with chromium oxides or with chromium and chromium oxides 2.464 tCO2e per tonne
72106100 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with aluminium-zinc alloys 2.622 tCO2e per tonne
72106900 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with aluminium (excluding products plated or coated with aluminium-zinc alloys) 2.392 tCO2e per tonne
72107010 Tinplate of a width of greater than or equal to 600mm and of a thickness of less than 0.5mm, tinned [coated with a layer of metal containing, by weight, greater than or equal to 97% of tin], not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, varnished 3.537 tCO2e per tonne
72107080 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, painted, varnished or plastic coated (excluding tinplate and products electrolytically plated or coated with chrome, varnished) 2.443 tCO2e per tonne
72109030 Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, clad 3.526 tCO2e per tonne
72109040 Flat-rolled products of iron or non-alloy steel, tinned and printed, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced” 3.509 tCO2e per tonne
72109080 Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled “cold-reduced”, of a width of greater than or equal to 600mm, plated or coated (excluding plated or coated with thin, lead “including terne-plate”, zinc, aluminium, chromium, chromium oxides, plastics, platinum, painted or varnished, clad and tinned and printed) 2.708 tCO2e per tonne
72111300 Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of greater than 150mm but less than 600mm and a thickness of greater than or equal to 4mm, not in coils, without patterns in relief, commonly known as “wide flats” 1.843 tCO2e per tonne
72111400 Flat-rolled products of iron or non-alloy steel, of a width less than 600mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of greater than or equal to 4,75mm (excluding “wide flats”) 2.704 tCO2e per tonne
72111900 Flat-rolled products of iron or non-alloy steel, of a width less than 600mm, simply hot-rolled, not clad, plated or coated, of a thickness less than 4.75mm (excluding “wide flats”) 2.670 tCO2e per tonne
72112320 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, simply cold-rolled “cold-reduced”, not clad, plated or coated, containing by weight less than 0.25% of carbon “electrical” 3.400 tCO2e per tonne
72112330 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm and of a thickness of greater than or equal to 0.35mm, simply cold-rolled “cold-reduced”, not clad, plated or coated, containing by weight less than 0.25% of carbon (excluding electrical plate) 3.581 tCO2e per tonne
72112380 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm and of a thickness of less than 0.35mm, simply cold-rolled “cold-reduced”, not clad, plated or coated, containing by weight less than 0.25% of carbon (excluding electrical plate) 3.468 tCO2e per tonne
72112900 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, simply cold-rolled “cold-reduced”, not clad, plated or coated, containing by weight greater than or equal to 0.25% of carbon 3.972 tCO2e per tonne
72119020 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked, but not clad, plated or coated, perforated 3.526 tCO2e per tonne
72119080 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked, but not clad, plated or coated non-perforated 3.167 tCO2e per tonne
72121010 Tinplate of iron or non-alloy steel, of a width of less than 600mm and of a thickness of less than 0.5mm, tinned [coated with a layer of metal containing, by weight, greater than or equal to 97% of tin], not further worked than surface-treated 2.909 tCO2e per tonne
72121090 Flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled “cold-reduced”, of a width of less than 600mm, tinned (excluding tinplate, not further worked than surface-treated) 3.616 tCO2e per tonne
72122000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, electrolytically plated or coated with zinc 3.577 tCO2e per tonne
72123000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, tinned (excluding electrolytically plated or coated with zinc) 3.504 tCO2e per tonne
72124020 Tinplate of a width of less than 600mm and of a thickness of less than 0.5mm, tinned [coated with a layer of metal containing, by weight, greater than or equal to 97% of tin], not further worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, varnished 3.151 tCO2e per tonne
72124080 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, painted, varnished or plastic coated (excluding tinplate, not further worked than varnished, and products plated or coated with chromium oxides or with chromium and chromium oxides, varnished) 3.128 tCO2e per tonne
72125020 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with chromium oxides or with chromium and chromium oxides (excluding varnished) 3.524 tCO2e per tonne
72125030 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with chromium or nickel 2.947 tCO2e per tonne
72125040 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with copper 2.176 tCO2e per tonne
72125061 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with aluminium-zinc alloys 4.495 tCO2e per tonne
72125069 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, plated or coated with aluminium (excluding products plated or coated with aluminium-zinc alloys) 3.123 tCO2e per tonne
72125090 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, clad (excluding products plated or coated with tin or zinc, copper, with chromium oxides or with chromium and chromium oxides, chromium, nickel or aluminium, painted or varnished, and plastic-coated) 4.240 tCO2e per tonne
72126000 Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, clad 3.733 tCO2e per tonne
72131000 Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process 3.309 tCO2e per tonne
72132000 Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excluding bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) 3.694 tCO2e per tonne
72139110 Bars and rods, hot-rolled, of the type used for concrete reinforcement, smooth, of iron or non-alloy steel, in irregularly wound coils, of circular cross-section measuring less than 14mm in diameter 2.637 tCO2e per tonne
72139120 Bars and rods, hot-rolled, of the type used for tyre cord, smooth, of iron or non-alloy steel, in irregularly wound coils 1.529 tCO2e per tonne
72139141 Bars and rods, hot-rolled, of iron or non-alloy steel, in irregularly wound coils, containing by weight less than or equal to 0.06% of carbon, of circular cross-section measuring less than 14mm in diameter (excluding free-cutting steel, bars and rods, hot-rolled, for concrete reinforcement and tyre cord, and bars and rods, hot-rolled, containing indentations, ribs, grooves or other deformations produced during the rolling process) 3.486 tCO2e per tonne
72139149 Bars and rods, hot-rolled, of iron or non-alloy steel, in irregularly wound coils, containing by weight greater than 0.06% and less than 0.25% of carbon, of circular cross-section, measuring less than 14mm in diameter (excluding of free-cutting steel, bars and rods, hot-rolled, for concrete reinforcement and tyre cord and bars and rods, hot-rolled, containing indentations, ribs, grooves or other deformations produced during the rolling process) 2.541 tCO2e per tonne
72139170 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, containing by weight greater than or equal to 0.25% but less than or equal to 0.75% carbon, of circular cross-section measuring less than 14mm in diameter (excluding of free-cutting steel, and bars and rods, smooth, for concrete reinforcement and tyre cord, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) 4.396 tCO2e per tonne
72139190 Bars and rods, hot-rolled, of iron or non-alloy steel, in irregularly wound coils, containing by weight greater than 0.75% of carbon, of circular cross-section measuring less than 14mm in diameter (excluding of free-cutting steel, bars and rods, smooth, for tyre cord and bars and rods with indentations, ribs, grooves and other deformations produced during the rolling process) 3.207 tCO2e per tonne
72139910 Bars and rods, of iron or non-alloy steel, hot-rolled, in irregularly wound coils, containing by weight less than 0.25% carbon (excluding products of circular cross-section measuring less than 14mm in diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) 1.529 tCO2e per tonne
72139990 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, containing by weight greater than or equal to 0.25% carbon (excluding products of circular cross-section measuring less than 14mm diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) 3.537 tCO2e per tonne
72141000 Bars and rods, of iron or non-alloy steel, not further worked than forged (excluding in irregularly wound coils) 3.682 tCO2e per tonne
72142000 Bars and rods, of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process 3.040 tCO2e per tonne
72143000 Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excluding containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling) 2.518 tCO2e per tonne
72149110 Bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight less than 0.25% of carbon, of rectangular “other than square” cross-section (excluding those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) 2.545 tCO2e per tonne
72149190 Other bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight greater than or equal to 0.25% of carbon, of rectangular “other than square” cross-section (excluding those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) 2.541 tCO2e per tonne
72149910 Bars and rods of the type used for concrete reinforcement, smooth, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing less than 0.25% of carbon, of square cross-section or of a cross-section other than rectangular 2.562 tCO2e per tonne
72149931 Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing less than 0.25% of carbon, of circular cross-section, of a maximum diameter of greater than or equal to 80mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) 3.521 tCO2e per tonne
72149939 Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing less than 0.25% of carbon, of circular cross-section of a maximum diameter of less than 80mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) 2.581 tCO2e per tonne
72149950 Bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight less than 0.25% of carbon, of square cross-section or of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) 2.538 tCO2e per tonne
72149971 Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight greater than or equal to 0.25% carbon, of circular cross-section measuring greater than or equal to 80mm in diameter (excluding bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) 3.546 tCO2e per tonne
72149979 Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight greater than or equal to 0.25% carbon, of circular cross-section measuring less than 80mm in diameter (excluding bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) 3.422 tCO2e per tonne
72149995 Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight greater than or equal to 0.25% carbon, of square or of other than rectangular or circular cross-section (excluding indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) 3.867 tCO2e per tonne
72151000 Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished 2.826 tCO2e per tonne
72155011 Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight less than 0.25% of carbon of rectangular “other than square” cross-section (excluding those of free-cutting steel) 3.443 tCO2e per tonne
72155019 Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight less than 0.25% of carbon, of square or other than rectangular cross-section (excluding those of free-cutting steel) 2.864 tCO2e per tonne
72155080 Other bars and rods of iron or non-alloy steel, not further worked than cold-formed or cold-finished, containing by weight greater than or equal to 0.25% of carbon (excluding those of free-cutting steel) 2.694 tCO2e per tonne
72159000 Bars or rods, of iron or non-alloy steel, cold-formed or cold-finished and further worked or hot-formed and further worked, not elsewhere specified 4.211 tCO2e per tonne
72161000 U, I or H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80mm 2.547 tCO2e per tonne
72162100 L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80mm 2.574 tCO2e per tonne
72162200 T sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80mm 2.545 tCO2e per tonne
72163110 U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height greater than or equal to 80mm but less than or equal to 220mm 2.530 tCO2e per tonne
72163190 U sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height greater than 220mm 2.519 tCO2e per tonne
72163211 I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height greater than or equal to 80mm but less than or equal to 220mm 2.633 tCO2e per tonne
72163219 I sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height greater than or equal to 80mm but less than or equal to 220mm (excluding 7216.32.11) 2.723 tCO2e per tonne
72163291 I sections with parallel flange faces, of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height greater than 220mm 2.695 tCO2e per tonne
72163299 I sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height greater than 220mm (excluding 7216.32.91) 4.687 tCO2e per tonne
72163310 H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height greater than or equal to 80mm but less than or equal to 180mm 2.990 tCO2e per tonne
72163390 H sections of iron or non-alloy steel, simply hot-rolled, hot-drawn or extruded, of a height greater than 180mm 2.665 tCO2e per tonne
72164010 L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of greater than or equal to 80mm 2.541 tCO2e per tonne
72164090 T sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of greater than or equal to 80mm 2.427 tCO2e per tonne
72165010 Sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, with a cross-section which is capable of being enclosed in a square the side of which is less than or equal to 80mm (excluding U, I, H, L or T sections) 2.604 tCO2e per tonne
72165091 Bulb sections “bulb flat”, only hot-rolled, hot-drawn or hot-extruded 2.542 tCO2e per tonne
72165099 Profile of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded (other than with a cross-section which is capable of being enclosed in a square the side of which is less than or equal to 80mm, and U-, I-, H-, L- or T-sections and ribbed sections [ribbed steel]) 3.363 tCO2e per tonne
72166110 c, l, u, z, omega or open-ended sections of iron or non-alloy steel, simply cold-formed or cold-finished, obtained from flat-rolled products 3.640 tCO2e per tonne
72166190 Angles, shapes and sections (other than c, l, u, z, omega or open-ended sections) of iron or non-alloy steel, simply cold-formed or cold-finished, obtained from flat-rolled products 3.675 tCO2e per tonne
72166900 Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excluding profiled sheet) 2.799 tCO2e per tonne
72169110 Sheets of iron or non-alloy steel, cold-formed or cold finished, profiled “ribbed” 4.070 tCO2e per tonne
72169180 Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished from flat-rolled products and further worked (excluding profiled sheet) 2.562 tCO2e per tonne
72169900 Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished and further worked, or hot-forged, or hot-formed by other means and further worked, not elsewhere specified (excluding from flat-rolled products) 4.172 tCO2e per tonne
72171010 Wire of iron or non-alloy steel, in coils, containing by weight less than 0.25% carbon, not plated or coated, whether or not polished, with a maximum cross-sectional dimension of less than 0.8mm 3.329 tCO2e per tonne
72171031 Wire of iron or non-alloy steel, in coils, containing by weight less than 0.25% carbon, with indentations, ribs, grooves or other deformations produced during the rolling process, not plated or coated, with a maximum cross-sectional dimension of greater than or equal to 0.8mm 3.396 tCO2e per tonne
72171039 Wire of iron or non-alloy steel, in coils, containing by weight less than 0.25% carbon, not plated or coated, with a maximum cross-sectional dimension of greater than or equal to 0.8mm (without indentations, ribs, grooves or other deformations produced during the rolling process) 2.941 tCO2e per tonne
72171050 Wire of iron or non-alloy steel, in coils, containing by weight greater than or equal to 0.25% but less than 0.6% carbon, not plated or coated, whether or not polished (excluding hot-rolled bars and rods) 2.149 tCO2e per tonne
72171090 Wire of iron or non-alloy steel, in coils, containing by weight greater than or equal to 0.6% carbon, not plated or coated, whether or not polished (excluding hot-rolled bars and rods) 3.116 tCO2e per tonne
72172010 Wire of iron or non-alloy steel, in coils, containing by weight less than 0.25% carbon, plated or coated with zinc, with a maximum cross-sectional dimension of less than 0.8mm 4.440 tCO2e per tonne
72172030 Wire of iron or non-alloy steel, in coils, containing by weight less than 0.25% carbon, plated or coated with zinc, with a maximum cross-sectional dimension of less than 0.8mm (excluding bars and rods) 3.401 tCO2e per tonne
72172050 Wire of iron or non-alloy steel, in coils, containing by weight greater than or equal to 0.25% but less than 0.6% carbon, plated or coated with zinc (excluding bars and rods) 4.135 tCO2e per tonne
72172090 Wire of iron or non-alloy steel, in coils, containing by weight greater than or equal to 0.6% carbon, plated or coated with zinc (excluding bars and rods) 3.088 tCO2e per tonne
72173041 Wire of iron or non-alloy steel, in coils, containing by weight less than 0.25% carbon, copper-coated (excluding bars and rods) 2.147 tCO2e per tonne
72173049 Wire of iron or non-alloy steel, in coils, containing by weight less than 0.25% carbon, plated or coated with base metals (excluding products plated or coated with zinc or copper and bars and rods) 3.253 tCO2e per tonne
72173050 Wire of iron or non-alloy steel, in coils, containing by weight greater than or equal to 0.25% but less than 0.6% carbon, plated or coated with base metals (excluding products plated or coated with zinc, and bars and rods) 1.944 tCO2e per tonne
72173090 Wire of iron or non-alloy steel, in coils, containing by weight greater than or equal to 0.6% carbon, plated or coated with base metals (excluding products plated or coated with zinc, and bars and rods) 3.492 tCO2e per tonne
72179020 Wire of iron or non-alloy steel, in coils, containing by weight less than 0.25% carbon, plated or coated (excluding products plated or coated with base metals and bars and rods) 3.419 tCO2e per tonne
72179050 Wire of iron or non-alloy steel, in coils, containing by weight greater than or equal to 0.25% but less than 0.6% carbon, plated or coated (excluding products plated or coated with base metals, and bars and rods) 3.180 tCO2e per tonne
72179090 Wire of iron or non-alloy steel, in coils, containing by weight greater than or equal to 0.6% carbon, plated or coated (excluding products plated or coated with base metals, and bars and rods) 2.900 tCO2e per tonne
72181000 Steel, stainless, in ingots and other primary forms (excluding waste and scrap in ingot form, and products obtained by continuous casting) 3.587 tCO2e per tonne
72189110 Semi-finished products of stainless steel, of rectangular “other than square” cross-section, containing by weight greater than or equal to 2.5% nickel 5.820 tCO2e per tonne
72189180 Semi-finished products of stainless steel, of rectangular “other than square” cross-section, containing by weight less than 2.5% nickel 5.844 tCO2e per tonne
72189911 Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting 6.152 tCO2e per tonne
72189919 Semi-finished products of stainless steel, of square cross-section, forged 6.208 tCO2e per tonne
72189920 Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting 5.681 tCO2e per tonne
72189980 Semi-finished products of stainless steel, forged (excluding products of square or rectangular cross-section) 4.475 tCO2e per tonne
72191100 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils, of a thickness of greater than 10mm 5.687 tCO2e per tonne
72191210 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils, of a thickness of greater than or equal to 4.75mm but less than or equal to 10mm, containing by weight greater than or equal to 2.5% nickel 9.121 tCO2e per tonne
72191290 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils, of a thickness of greater than or equal to 4.75mm but less than or equal to 10mm, containing by weight less than 2.5% nickel 4.264 tCO2e per tonne
72191310 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils, of a thickness of greater than or equal to 3mm but less than or equal to 4.75mm, containing by weight greater than or equal to 2.5% nickel 7.429 tCO2e per tonne
72191390 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils, of a thickness of greater than or equal to 3mm but less than or equal to 4.75mm, containing by weight less than 2.5% nickel 4.613 tCO2e per tonne
72191410 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils, of a thickness of less than 3mm, containing by weight greater than or equal to 2.5% nickel 7.741 tCO2e per tonne
72191490 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils, of a thickness of less than 3mm, containing by weight less than 2.5% nickel 5.785 tCO2e per tonne
72192110 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils, of a thickness of greater than 10mm, containing by weight greater than or equal to 2.5% nickel 5.433 tCO2e per tonne
72192190 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils, of a thickness of greater than 10mm, containing by weight less than 2.5% nickel 4.575 tCO2e per tonne
72192210 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils, of a thickness of greater than or equal to 4.75mm but less than or equal to 10mm, containing by weight greater than or equal to 2.5% nickel 6.379 tCO2e per tonne
72192290 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils, of a thickness of greater than or equal to 4.75mm but less than or equal to 10mm, containing by weight less than 2.5% nickel 5.057 tCO2e per tonne
72192300 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils, of a thickness of greater than or equal to 3mm and less than 4.75mm 5.395 tCO2e per tonne
72192400 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils, of a thickness of less than 3mm 5.916 tCO2e per tonne
72193100 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than or equal to 4.75mm 5.571 tCO2e per tonne
72193210 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than or equal to 3mm but less than or equal to 4.75mm, containing by weight greater than or equal to 2.5% nickel 6.517 tCO2e per tonne
72193290 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than or equal to 3mm but less than or equal to 4.75mm, containing by weight less than 2.5% nickel 5.775 tCO2e per tonne
72193310 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than 1mm but less than 3mm, containing by weight greater than or equal to 2.5% nickel 6.462 tCO2e per tonne
72193390 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than 1mm but less than 3mm, containing by weight less than 2.5% nickel 5.347 tCO2e per tonne
72193410 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than or equal to 0.5mm but less than or equal to 1mm, containing by weight greater than or equal to 2.5% nickel 6.101 tCO2e per tonne
72193490 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than or equal to 0.5mm but less than or equal to 1mm, containing by weight less than 2.5% nickel 5.758 tCO2e per tonne
72193510 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of less than 0.5mm, containing by weight greater than or equal to 2.5% nickel 5.137 tCO2e per tonne
72193590 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of less than 0.5mm, containing by weight less than 2.5% nickel 6.307 tCO2e per tonne
72199020 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked, perforated 6.123 tCO2e per tonne
72199080 Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked, non-perforated 6.047 tCO2e per tonne
72201100 Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than hot-rolled, of a thickness of greater than or equal to 4,75mm 5.508 tCO2e per tonne
72201200 Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than hot-rolled, of a thickness of less than 4,75mm 5.698 tCO2e per tonne
72202021 Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than or equal to 3mm and containing by weight greater than or equal to 2.5% nickel 6.006 tCO2e per tonne
72202029 Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than or equal to 3mm and containing by weight less than 2.5% nickel 5.581 tCO2e per tonne
72202041 Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than 0.35mm but less than 3mm, and containing by weight greater than or equal to 2.5% nickel 5.614 tCO2e per tonne
72202049 Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of greater than 0.35mm but less than 3mm, and containing by weight less than 2.5% nickel 5.842 tCO2e per tonne
72202081 Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of less than or equal to 0.35mm and containing by weight greater than or equal to 2.5% nickel 6.075 tCO2e per tonne
72202089 Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced”, of a thickness of less than or equal to 0.35mm and containing by weight less than 2.5% nickel 5.844 tCO2e per tonne
72209020 Flat-rolled products of stainless steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked, perforated 6.118 tCO2e per tonne
72209080 Flat-rolled products of stainless steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked, non-perforated 6.746 tCO2e per tonne
72210010 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight greater than or equal to 2.5% nickel 5.384 tCO2e per tonne
72210090 Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight less than 2.5% nickel 6.406 tCO2e per tonne
72221111 Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of greater than or equal to 800mm, containing by weight greater than or equal to 2.5% nickel 6.466 tCO2e per tonne
72221119 Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of greater than or equal to 800mm, containing by weight less than 2.5% nickel 6.625 tCO2e per tonne
72221181 Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring less than 80mm and containing by weight greater than or equal to 2.5% nickel 6.052 tCO2e per tonne
72221189 Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section measuring less than 80mm and containing by weight less than 2.5% nickel 5.510 tCO2e per tonne
72221910 Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight greater than or equal to 2.5% nickel (excluding such products of circular cross-section) 6.351 tCO2e per tonne
72221990 Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, containing by weight less than 2.5% nickel (excluding such products of circular cross-section) 6.190 tCO2e per tonne
72222011 Bars and rods of stainless steel, of circular cross-section of a diameter greater than or equal to 80mm, simply cold-formed or cold-finished, containing by weight greater than or equal to 2.5% nickel 5.119 tCO2e per tonne
72222019 Bars and rods of stainless steel, of circular cross-section of a diameter greater than or equal to 80mm, simply cold-formed or cold-finished, containing by weight less than 2.5% nickel 5.784 tCO2e per tonne
72222021 Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring greater than or equal to 25mm but less than 80mm and containing by weight greater than or equal to 2.5% nickel 5.777 tCO2e per tonne
72222029 Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring greater than or equal to 25mm but less than 80mm and containing by weight less than 2.5% nickel 5.903 tCO2e per tonne
72222031 Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring less than 25mm and containing by weight greater than or equal to 2.5% nickel 6.713 tCO2e per tonne
72222039 Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section measuring less than 25mm and containing by weight less than 2.5% nickel 5.475 tCO2e per tonne
72222081 Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight greater than or equal to 2.5% nickel (excluding such products of circular cross-section) 6.853 tCO2e per tonne
72222089 Bars and rods of stainless steel, not further worked than cold-formed or cold-finished, containing by weight less than 2.5% nickel (excluding such products of circular cross-section) 5.561 tCO2e per tonne
72223051 Other bars and rods of stainless steel, containing by weight greater than or equal to 2.5% of nickel, forged 4.875 tCO2e per tonne
72223091 Other bars and rods of stainless steel, containing by weight less than 2.5% of nickel, forged 5.667 tCO2e per tonne
72223097 Bars and rods of stainless steel, cold-formed or cold-finished and further worked, or hot-formed and further worked, not elsewhere specified (excluding forged products) 5.537 tCO2e per tonne
72224010 Angles, shapes and sections of stainless steel, only hot-rolled, only hot-drawn or only extruded 6.491 tCO2e per tonne
72224050 Angles, shapes and sections of stainless steel, not further worked than cold-formed or cold-finished 5.946 tCO2e per tonne
72224090 Angles, shapes and sections of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, not elsewhere specified 6.192 tCO2e per tonne
72230011 Wire of stainless steel, in coils, containing by weight 28% to 31% nickel and 20% to 22% chromium (excluding bars and rods) 6.259 tCO2e per tonne
72230019 Wire of stainless steel, in coils, containing by weight greater than or equal to 2.5% nickel (excluding such products containing 28% to 31% nickel and 20% to 22% chromium, and bars and rods) 6.515 tCO2e per tonne
72230091 Wire of stainless steel, in coils, containing by weight less than 2.5% nickel, 13% to 25% chromium and 3.5% to 6% aluminium (excluding bars and rods) 7.074 tCO2e per tonne
72230099 Wire of stainless steel, in coils, containing by weight less than 2.5% nickel (excluding such products containing 13% to 25% chromium and 3.5% to 6% aluminium, and bars and rods) 6.243 tCO2e per tonne
72241010 Ingots and other primary forms, of tool steel 4.781 tCO2e per tonne
72241090 Steel, alloy, other than stainless, in ingots or other primary forms (excluding of tool steel, waste and scrap in ingot form and products obtained by continuous casting) 3.901 tCO2e per tonne
72249002 Semi-finished products of tool steel 5.511 tCO2e per tonne
72249003 Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring less than twice the thickness 5.978 tCO2e per tonne
72249005 Semi-finished products of steel containing by weight less than or equal to 0.7% of carbon, 0.5% to 1.2% of manganese, 0.6% to 2.3% of silicon, or of steel containing by weight greater than or equal to 0.0008% of boron with any other element less than the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring less than twice the thickness 6.721 tCO2e per tonne
72249007 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring less than twice the thickness (excluding of tool steel, high-speed steel and articles of subheading 7224.90.05) 7.095 tCO2e per tonne
72249014 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring greater than or equal to twice the thickness (excluding of tool steel) 7.358 tCO2e per tonne
72249018 Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excluding of tool steel) 5.770 tCO2e per tonne
72249031 Semi-finished products of steel containing by weight 0.9% to 1.15% carbon, 0.5% to 2% of chromium and, if present, less than or equal to 0.5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting 5.978 tCO2e per tonne
72249038 Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excluding of tool steel and products containing by weight 0.9% to 1.15% of carbon, 0.5% to 2% of chromium and, if present, less than or equal to 0.5% of molybdenum) 7.716 tCO2e per tonne
72249090 Semi-finished products of alloy steel, other than stainless steel, forged (excluding of tool steel and products of square or rectangular, circular or polygonal cross-section) 4.802 tCO2e per tonne
72251100 Flat-rolled products of silicon-electrical steel, of a width of greater than or equal to 600mm, grain-oriented 5.153 tCO2e per tonne
72251910 Flat-rolled products of silicon-electrical steel, of a width of greater than or equal to 600mm, hot-rolled 5.953 tCO2e per tonne
72251990 Flat-rolled products of silicon-electrical steel, of a width of greater than or equal to 600mm, cold-rolled “cold-reduced”, non-grain-oriented 5.897 tCO2e per tonne
72253010 Flat-rolled products of tool steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils 8.052 tCO2e per tonne
72253030 Flat-rolled products of high-speed steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils 3.949 tCO2e per tonne
72253090 Flat-rolled products of alloy steel other than stainless, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils (excluding products of tool steel, high-speed steel or silicon-electrical steel) 8.039 tCO2e per tonne
72254012 Flat-rolled products of tool steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils 6.674 tCO2e per tonne
72254015 Flat-rolled products of high-speed steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils 6.721 tCO2e per tonne
72254040 Flat-rolled products of alloy steel other than stainless, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils, of a thickness of greater than 10mm (excluding products of tool steel, high-speed steel or silicon-electrical steel) 4.380 tCO2e per tonne
72254060 Flat-rolled products of alloy steel other than stainless, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils, of a thickness of greater than or equal to 4.75mm but less than or equal to 10mm (excluding products of tool steel, high-speed steel or silicon-electrical steel) 3.682 tCO2e per tonne
72254090 Flat-rolled products of alloy steel other than stainless, of a width of greater than or equal to 600mm, not further worked than hot-rolled, not in coils, of a thickness of less than 4.75mm (excluding products of tool steel, high-speed steel or silicon-electrical steel) 3.543 tCO2e per tonne
72255020 Flat-rolled products of high-speed steel, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced” 6.667 tCO2e per tonne
72255080 Flat-rolled products of alloy steel other than stainless, of a width of greater than or equal to 600mm, not further worked than cold-rolled “cold-reduced” (excluding products of high-speed steel or silicon-electrical steel) 4.300 tCO2e per tonne
72259100 Flat-rolled products of alloy steel other than stainless, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced” and electrolytically plated or coated with zinc (excluding products of silicon-electrical steel) 4.522 tCO2e per tonne
72259200 Flat-rolled products of alloy steel other than stainless, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced” and plated or coated with zinc (excluding electrolytically plated or coated and products of silicon-electrical steel) 6.794 tCO2e per tonne
72259900 Flat-rolled products of alloy steel other than stainless, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked (excluding plated or coated with zinc and products of silicon-electrical steel) 4.334 tCO2e per tonne
72261100 Flat-rolled products of silicon-electrical steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, grain-oriented 6.777 tCO2e per tonne
72261910 Flat-rolled products of silicon-electrical steel, of a width of less than 600mm, not further worked than hot-rolled 5.252 tCO2e per tonne
72261980 Flat-rolled products of silicon-electrical steel, of a width of less than 600mm, cold-rolled “cold-reduced”, whether or not further worked, or hot-rolled and further worked, non-grain-oriented 6.720 tCO2e per tonne
72262000 Flat-rolled products of high-speed steel, of a width of less than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced” 4.956 tCO2e per tonne
72269120 Flat-rolled products of tool steel, of a width of less than 600mm, simply hot-rolled 6.618 tCO2e per tonne
72269191 Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of greater than or equal to 4.75mm, of a width of less than 600mm (excluding of tool steel, silicon-electrical steel or high speed steel) 7.040 tCO2e per tonne
72269199 Flat-rolled products of alloy steel other than stainless steel, simply hot-rolled, of a thickness of less than 4.75mm, of a width of less than 600mm (excluding of tool steel, silicon-electrical steel or high speed steel) 4.076 tCO2e per tonne
72269200 Flat-rolled products of alloy steel other than stainless, of a width of less than 600mm, not further worked than cold-rolled “cold-reduced” (excluding products of high-speed steel or silicon-electrical steel) 4.062 tCO2e per tonne
72269910 Flat-rolled products of alloy steel other than stainless, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced” and electrolytically plated or coated with zinc (excluding products of high-speed steel or silicon-electrical steel) 6.674 tCO2e per tonne
72269930 Flat-rolled products of alloy steel other than stainless, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced” and plated or coated with zinc (excluding electrolytically plated or coated, and products of high-speed steel or silicon-electrical steel) 5.078 tCO2e per tonne
72269970 Flat-rolled products of alloy steel other than stainless, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced” and further worked (excluding plated or coated with zinc, and products of high-speed steel or silicon-electrical steel) 7.172 tCO2e per tonne
72271000 Bars and rods of high-speed steel, hot-rolled, in irregularly wound coils 4.000 tCO2e per tonne
72272000 Bars and rods of silico-manganese steel, hot-rolled, in irregularly wound coils 2.387 tCO2e per tonne
72279010 Bars and rods, hot-rolled, of steel containing by weight greater than or equal to 0.0008% of boron with any other element less than the minimum content referred to in Note 1 f to this chapter, in irregularly wound coils 6.000 tCO2e per tonne
72279050 Bars and rods, hot-rolled, of steel containing by weight 0.9% to 1.15% carbon, 0.5% to 2% of chromium and, if present, less than or equal to 0.5% of molybdenum, in irregularly wound coils 6.000 tCO2e per tonne
72279095 Bars and rods, hot-rolled, in irregularly wound coils of alloy steel other than stainless (excluding of high-speed steel or silico-manganese steel and bars and rods of subheadings 7227.90.10 and 7227.90.50) 3.919 tCO2e per tonne
72281020 Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.197 tCO2e per tonne
72281050 Bars and rods of high-speed steel, forged (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7.090 tCO2e per tonne
72281090 Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excluding forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5.580 tCO2e per tonne
72282010 Bars and rods of silico-manganese steel, of rectangular “other than square” cross-section, hot-rolled on four faces (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.196 tCO2e per tonne
72282091 Bars and rods of silico-manganese steel, of square or other than rectangular cross-section, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.732 tCO2e per tonne
72282099 Bars and rods of silico-manganese steel, of square or other than rectangular cross-section, only cold-formed or cold-finished, including further worked, or hot-rolled and further worked (excluding hot-rolled, hot drawn or extruded, not further worked than clad, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5.587 tCO2e per tonne
72283020 Bars and rods of tool steel, only hot-rolled, only hot-drawn or only extruded (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.391 tCO2e per tonne
72283041 Bars and rods of steel containing by weight 0.9 to 1.15% of carbon and 0.5 to 2% of chromium, and, if present, less than or equal to 0.5% of molybdenum, only hot-rolled, hot-drawn or hot-extruded, of a circular cross-section of a diameter of greater than or equal to 80mm (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.317 tCO2e per tonne
72283049 Bars and rods of steel containing by weight 0.9 to 1.15% of carbon and 0.5 to 2% of chromium, and, if present, less than or equal to 0.5% of molybdenum, only hot-rolled, only hot-drawn or hot-extruded (other than of circular cross-section, of a diameter of greater than or equal to 80mm and excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 2.556 tCO2e per tonne
72283061 Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of greater than or equal to 80mm (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.461 tCO2e per tonne
72283069 Bars and rods or alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of circular cross-section, of a diameter of less than 80mm (other than of high-speed steel, silico-manganese steel, tool steel and articles of subheading 7228.30.49 and excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.527 tCO2e per tonne
72283070 Bars and rods of alloy steel other than stainless steel, of rectangular “other than square” cross-section, hot-rolled on four faces (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.41 and 7228.30.49 and excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.346 tCO2e per tonne
72283089 Bars and rods of alloy steel other than stainless steel, only hot-rolled, hot-drawn or hot-extruded, of other than rectangular [other than square] cross-section, rolled on four faces, or of circular cross-section (other than of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.30.49 and excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5.214 tCO2e per tonne
72284010 Bars and rods of tool steel, only forged (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5.530 tCO2e per tonne
72284090 Bars and rods of alloy steel, other than stainless steel, only forged (excluding of high-speed steel, silico-manganese steel, tool steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.792 tCO2e per tonne
72285020 Bars and rods of tool steel, only cold-formed or cold-finished (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.291 tCO2e per tonne
72285040 Bars and rods of steel containing 0.9% to 1.15% of carbon, 0.5% to 2% of chromium and, if present less than or equal to 0.5% of molybdenum, only cold-formed or cold-finished (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5.841 tCO2e per tonne
72285061 Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of greater than or equal to 80mm (excluding of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5.059 tCO2e per tonne
72285069 Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of less than 80mm (excluding of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 6.782 tCO2e per tonne
72285080 Bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished (excluding of circular cross-section and products of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 4.689 tCO2e per tonne
72286020 Bars and rods of tool steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5.246 tCO2e per tonne
72286080 Bars and rods of alloy steel, other than stainless steel, cold-formed or cold-finished and further worked or hot-formed and further worked (excluding bars and rods of high-speed steel, silico-manganese steel or tool steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 5.144 tCO2e per tonne
72287010 Angles, shapes and sections of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded 6.867 tCO2e per tonne
72287090 Angles, shapes and sections of alloy steel other than stainless, not elsewhere specified (excluding products not further worked than hot-rolled, hot-drawn or extruded) 7.158 tCO2e per tonne
72288000 Hollow drill bars and rods, of alloy or non-alloy steel 6.668 tCO2e per tonne
72292000 Wire of silico-manganese steel, in coils (excluding bars and rods) 6.724 tCO2e per tonne
72299020 Wire of high-speed steel, in coils (excluding bars and rods) 5.780 tCO2e per tonne
72299050 Wire of steel containing by weight 0.9% to 1.1% of carbon, 0.5% to 2% of chromium and, if present, less than or equal to 0.5% of molybdenum, in coils (excluding rolled bars and rods) 4.153 tCO2e per tonne
72299090 Wire of alloy steel other than stainless, in coils (excluding rolled bars and rods, wire of high-speed steel or silico-manganese steel and articles of subheading 7229.90.50) 6.609 tCO2e per tonne
73011000 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements 4.005 tCO2e per tonne
73012000 Angles, shapes and sections, of iron or steel, welded 2.564 tCO2e per tonne
73021010 Current-conducting rails of iron or steel, with parts of non-ferrous metal, for railway or tramway track (excluding check-rails) 6.695 tCO2e per tonne
73021022 Vignole rails of iron or steel, for railway or tramway track, new, of a weight of greater than or equal to 36kg/m 6.223 tCO2e per tonne
73021028 Vignole rails of iron or steel, for railway or tramway track, new, of a weight of less than 36kg/m 6.826 tCO2e per tonne
73021040 Grooved rails of iron or steel, for railway or tramway track, new 6.402 tCO2e per tonne
73021050 Rails of iron or steel, for railway or tramway track, new (excluding Vignole rails, grooved rails, and current-conducting rails with parts of non-ferrous metal) 6.645 tCO2e per tonne
73021090 Rails of iron or steel, for railway or tramway track, used (excluding current-conducting rails with parts of non-ferrous metal) 4.117 tCO2e per tonne
73023000 Switch blades, crossing frogs, point rods and other crossing pieces, for railway or tramway track, of iron or steel 5.570 tCO2e per tonne
73024000 Fish-plates and sole plates of iron or steel, for railways or tramways 6.110 tCO2e per tonne
73029000 Sleepers “cross-ties”, check-rails, rack rails, chairs, chair wedges, rail clips, bedplates and ties and other specialised material for the jointing or fixing of railway or tramway track, of iron or steel (excluding rails, switch blades, crossing frogs, point rods and other crossing pieces, and fish-plates and sole plates) 4.712 tCO2e per tonne
73030010 Tubes and pipes of a kind used in pressure systems, of cast iron 2.971 tCO2e per tonne
73030090 Tubes, pipes and hollow profiles, of cast iron (excluding products of a kind used in pressure systems) 3.002 tCO2e per tonne
73041100 Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel 6.173 tCO2e per tonne
73041910 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of less than or equal to 168.3mm (excluding products of stainless steel or of cast iron) 2.916 tCO2e per tonne
73041930 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of greater than 168.3mm but less than or equal to 406.4mm (excluding products of stainless steel or of cast iron) 2.446 tCO2e per tonne
73041990 Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel, of an external diameter of greater than 406.4mm (excluding products of stainless steel or of cast iron) 2.473 tCO2e per tonne
73042200 Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas 6.508 tCO2e per tonne
73042300 Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excluding products of stainless steel or of cast iron) 2.298 tCO2e per tonne
73042400 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 3.703 tCO2e per tonne
73042910 Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter less than or equal to 168.3mm (excluding products of cast iron) 2.657 tCO2e per tonne
73042930 Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter greater than 168.3mm, but less than or equal to 406.4mm (excluding products of cast iron) 2.337 tCO2e per tonne
73042990 Casing and tubing of a kind used for drilling for oil or gas, seamless, of iron or steel, of an external diameter greater than 406.4mm (excluding products of cast iron) 2.969 tCO2e per tonne
73043120 Precision tubes, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled “cold-reduced” (excluding line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 2.930 tCO2e per tonne
73043180 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled “cold-reduced” (excluding cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas and precision tubes) 2.738 tCO2e per tonne
73043950 Threaded or threadable tubes “gas pipe”, seamless, of iron or non-alloy steel (excluding of cast iron) 2.941 tCO2e per tonne
73043982 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of less than or equal to 168.3mm (excluding cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) 2.842 tCO2e per tonne
73043983 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of greater than 168.3mm but less than or equal to 406.4mm (excluding cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) 2.958 tCO2e per tonne
73043988 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, of an external diameter of greater than 406.4mm (excluding cold-drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) 2.944 tCO2e per tonne
73044100 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled “cold-reduced” (excluding line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 6.367 tCO2e per tonne
73044983 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of less than or equal to 168.3mm (excluding cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) 5.877 tCO2e per tonne
73044985 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of greater than 168.3mm but less than or equal to 406.4mm (excluding cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) 5.676 tCO2e per tonne
73044989 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, of an external diameter of greater than 406.4mm (excluding cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) 5.912 tCO2e per tonne
73045110 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled “cold-reduced”, straight and of uniform wall-thickness, containing by weight greater than or equal to 0.9% but less than or equal to 1.15% carbon and greater than or equal to 0.5% but less than or equal to 2% chromium, whether or not containing by weight less than or equal to 0.5% molybdenum (excluding tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29) 2.627 tCO2e per tonne
73045181 Precision tubes, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled “cold-reduced” (excluding line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil and tubes, and pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight greater than or equal to 0.9% but less than or equal to 1.15% carbon and greater than or equal to 0.5% but less than or equal to 2% chrome, whether or not containing by weight less than or equal to 0.5% molybdenum) 2.623 tCO2e per tonne
73045189 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled “cold-reduced” (excluding line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil, precision tubes, and pipes and hollow profiles, straight and of uniform wall-thickness, containing by weight greater than or equal to 0.9% but less than or equal to 1.15% carbon and greater than or equal to 0.5% but less than or equal to 2% chrome, whether or not containing by weight less than or equal to 0.5% molybdenum) 3.176 tCO2e per tonne
73045930 Tubes, pipes and hollow profiles of alloy steel (excluding stainless), seamless, of circular cross-section (not cold-drawn or cold-rolled), straight and of uniform wall-thickness, containing by weight greater than or equal to 0.9% but less than or equal to 1.15% carbon and greater than or equal to 0.5% but less than or equal to 2% chromium, whether or not containing by weight less than or equal to 0.5% molybdenum (excluding tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29) 2.712 tCO2e per tonne
73045982 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of less than or equal to 168.3mm (excluding cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) 2.966 tCO2e per tonne
73045983 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of greater than 168.3mm but less than or equal to 406.4mm (excluding cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) 2.929 tCO2e per tonne
73045989 Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of greater than 406.4mm (excluding cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) 2.887 tCO2e per tonne
73049000 Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excluding products of cast iron) 3.210 tCO2e per tonne
73051100 Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of greater than 406.4mm, of iron or steel, longitudinally submerged arc welded 2.744 tCO2e per tonne
73051200 Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of greater than 406.4mm, of iron or steel, longitudinally arc welded (excluding products longitudinally submerged arc welded) 2.607 tCO2e per tonne
73051900 Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of greater than 406.4mm, of flat-rolled products of iron or steel (excluding products longitudinally arc welded) 3.855 tCO2e per tonne
73052000 Casing of a kind used in drilling for oil or gas, having circular cross-sections and an external diameter of greater than 406.4mm, of flat-rolled products of iron or steel 2.281 tCO2e per tonne
73053100 Tubes and pipes having circular cross-sections and an external diameter of greater than 406.4mm, of iron or steel, longitudinally welded (excluding products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) 2.995 tCO2e per tonne
73053900 Tubes and pipes having circular cross-sections and an external diameter of greater than 406.4mm, of iron or steel, welded (excluding products longitudinally welded or of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) 2.411 tCO2e per tonne
73059000 Tubes and pipes having circular cross-sections and an external diameter of greater than 406.4mm, of flat-rolled products of iron or steel, welded (excluding welded products or products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) 2.555 tCO2e per tonne
73061100 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of less than or equal to 406.4mm 3.736 tCO2e per tonne
73061900 Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of less than or equal to 406.4mm (excluding products of stainless steel or of cast iron) 3.924 tCO2e per tonne
73062100 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of less than or equal to 406.4mm 3.942 tCO2e per tonne
73062900 Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of less than or equal to 406.4mm (excluding products of stainless steel or of cast iron) 1.909 tCO2e per tonne
73063012 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled “cold-reduced” 3.818 tCO2e per tonne
73063018 Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excluding cold-drawn or cold-rolled) 2.642 tCO2e per tonne
73063041 Threaded or threadable tubes “gas pipe”, welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zinc 4.400 tCO2e per tonne
73063049 Threaded or threadable tubes “gas pipe”, welded, of circular cross-section, of iron or non-alloy steel (excluding products plated or coated with zinc) 2.651 tCO2e per tonne
73063072 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of less than or equal to 168.3mm, plated or coated with zinc (excluding line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 4.036 tCO2e per tonne
73063077 Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of less than or equal to 168.3mm (excluding plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes “gas pipe”) 2.687 tCO2e per tonne
73063080 Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of greater than 168.3mm but less than or equal to 406.4mm (excluding line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes “gas pipe”) 3.078 tCO2e per tonne
73064020 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled “cold-reduced” (excluding products having internal and external circular cross-sections and an external diameter of greater than 406.4mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 6.588 tCO2e per tonne
73064080 Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excluding products cold-drawn or cold-rolled “cold-reduced”, tubes and pipes having internal and external circular cross-sections and an external diameter of greater than 406.4mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 4.843 tCO2e per tonne
73065021 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled “cold-reduced” 3.921 tCO2e per tonne
73065029 Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excluding cold-drawn or cold-rolled) 2.811 tCO2e per tonne
73065080 Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excluding tubes and pipes having internal and external circular cross-sections and an external diameter of greater than 406.4mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes) 3.278 tCO2e per tonne
73066110 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel 5.727 tCO2e per tonne
73066192 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of less than or equal to 2mm 2.700 tCO2e per tonne
73066199 Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of greater than 2mm 2.663 tCO2e per tonne
73066910 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excluding tubes and pipes having internal and external circular cross-sections and an external diameter of greater than 406.4mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 4.069 tCO2e per tonne
73066990 Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excluding tubes and pipes having internal and external circular cross-sections and an external diameter of greater than 406.4mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 2.517 tCO2e per tonne
73069000 Tubes, pipes and hollow profiles “for example, open seam, riveted or similarly closed”, of iron or steel (excluding of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of greater than 406,4mm) 3.948 tCO2e per tonne
73071110 Tube or pipe fittings of non-malleable cast iron, of a kind used in pressure systems 3.785 tCO2e per tonne
73071190 Tube or pipe fittings of non-malleable cast iron (excluding products of a kind used in pressure systems) 3.649 tCO2e per tonne
73071910 Tube or pipe fittings of cast iron (excluding of non-malleable) 3.571 tCO2e per tonne
73071990 Cast tube or pipe fittings of steel 4.182 tCO2e per tonne
73072100 Flanges of stainless steel (excluding cast products) 5.335 tCO2e per tonne
73072210 Sleeves, of stainless steel, threaded (excluding cast products) 4.530 tCO2e per tonne
73072290 Elbows and bends, of stainless steel, threaded (excluding cast products) 5.068 tCO2e per tonne
73072310 Butt welding elbows and bends of stainless steel (excluding cast products) 4.951 tCO2e per tonne
73072390 Butt welding tube or pipe fittings of stainless steel (excluding cast products and elbows and bends) 5.221 tCO2e per tonne
73072910 Threaded tube or pipe fittings of stainless steel (excluding cast products, flanges, elbows, bends and sleeves) 4.823 tCO2e per tonne
73072980 Tube or pipe fittings of stainless steel (excluding cast, threaded, butt welding fittings and flanges) 4.779 tCO2e per tonne
73079100 Flanges of iron or steel (excluding cast or stainless products) 3.602 tCO2e per tonne
73079210 Sleeves of iron or steel, threaded (excluding cast or of stainless steel) 3.620 tCO2e per tonne
73079290 Elbows and bends, of iron or steel, threaded (excluding cast or of stainless steel) 3.052 tCO2e per tonne
73079311 Butt welding elbows and bends, of iron or steel, with greatest external diameter less than or equal to 609.6mm (excluding cast iron or stainless steel products) 3.467 tCO2e per tonne
73079319 Butt welding fittings of iron or steel, with greatest external diameter less than or equal to 609.6mm (excluding cast iron or stainless steel products, elbows, bends and flanges) 3.399 tCO2e per tonne
73079391 Butt welding elbows and bends, of iron or steel, with greatest external diameter greater than 609.6mm (excluding cast iron or stainless steel products) 3.491 tCO2e per tonne
73079399 Butt welding fittings of iron or steel, with greatest external diameter greater than 609.6mm (excluding cast iron or stainless steel products, elbows, bends and flanges) 3.379 tCO2e per tonne
73079910 Threaded tube or pipe fittings, of iron or steel (excluding cast iron or stainless steel products, flanges, elbows, bends and sleeves) 3.694 tCO2e per tonne
73079980 Tube or pipe fittings, of iron or steel (excluding of cast iron or stainless steel, threaded, butt welding fittings, and flanges) 3.519 tCO2e per tonne
73081000 Bridges and bridge-sections, of iron or steel 4.989 tCO2e per tonne
73082000 Towers and lattice masts, of iron or steel 5.973 tCO2e per tonne
73083000 Doors, windows and their frames and thresholds for doors, of iron or steel 6.510 tCO2e per tonne
73084000 Equipment for scaffolding, shuttering, propping or pit-propping (excluding composite sheetpiling products and formwork panels for poured-in-place concrete, which have the characteristics of moulds) 6.366 tCO2e per tonne
73089051 Panels comprising two walls of profiled “ribbed” sheet, of iron or steel, with an insulating core 6.523 tCO2e per tonne
73089059 Structures and parts of structures, of iron or steel, solely or principally of sheet, not elsewhere specified (excluding doors and windows and their frames, and panels comprising two walls of profiled “ribbed” sheet, of iron or steel, with an insulating core) 6.515 tCO2e per tonne
73089098 Structures and parts of structures of iron or steel, not elsewhere specified (excluding bridges and bridge-sections; towers; lattice masts; doors, windows and their frames and thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) 6.374 tCO2e per tonne
73090010 Reservoirs, tanks, vats and similar containers, of iron or steel, for gases other than compressed or liquefied gas, of a capacity of greater than 300l (excluding containers fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 6.288 tCO2e per tonne
73090030 Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, lined or heat-insulated and of a capacity of greater than 300l (excluding containers fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 6.547 tCO2e per tonne
73090051 Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of greater than 100,000l (excluding containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 7.046 tCO2e per tonne
73090059 Reservoirs, tanks, vats and similar containers, of iron or steel, for liquids, of a capacity of less than or equal to 100,000l but greater than 300l (excluding containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 6.781 tCO2e per tonne
73090090 Reservoirs, tanks, vats and similar containers, of iron or steel, for solids, of a capacity of greater than 300l (excluding containers lined or heat-insulated or fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 7.050 tCO2e per tonne
73101000 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of greater than or equal to 50l but less than or equal to 300l, not elsewhere specified (excluding containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment) 3.502 tCO2e per tonne
73102111 Cans of iron or steel, of a capacity of less than 50l, which are to be closed by soldering or crimping, of a kind used for preserving food 4.662 tCO2e per tonne
73102119 Cans of iron or steel, of a capacity of less than 50l, which are to be closed by soldering or crimping, of a kind used for preserving drink 4.571 tCO2e per tonne
73102191 Cans of iron or steel, of a capacity of less than 50l, which are to be closed by soldering or crimping, of a wall thickness of less than 0.5mm (excluding cans for compressed or liquefied gas, and cans of a kind used for preserving food and drink) 3.591 tCO2e per tonne
73102199 Cans of iron or steel, of a capacity of less than 50l, which are to be closed by soldering or crimping, of a wall thickness of greater than or equal to 0.5mm (excluding cans for compressed or liquefied gas, and cans of a kind used for preserving food and drink) 4.473 tCO2e per tonne
73102910 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of less than 50l and of a wall thickness of less than 0.5mm, not elsewhere specified (excluding containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) 4.232 tCO2e per tonne
73102990 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of less than 50l and of a wall thickness of greater than or equal to 0.5mm, not elsewhere specified (excluding containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) 4.418 tCO2e per tonne
73110011 Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure greater than or equal to 165 bar, of a capacity less than 20l (excluding containers specifically constructed or equipped for one or more types of transport) 6.949 tCO2e per tonne
73110013 Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure greater than or equal to 165 bar, of a capacity greater than or equal to 20l to less than or equal to 50l (excluding containers specifically constructed or equipped for one or more types of transport) 6.726 tCO2e per tonne
73110019 Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure greater than or equal to 165 bar, of a capacity greater than 50l (excluding containers specifically constructed or equipped for one or more types of transport) 6.589 tCO2e per tonne
73110030 Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure less than 165 bar (excluding containers specifically constructed or equipped for one or more types of transport) 6.297 tCO2e per tonne
73110091 Containers of iron or steel, seamless, for compressed or liquefied gas, of a capacity of less than 1.000l (excluding seamless containers and containers specifically constructed or equipped for one or more types of transport) 5.654 tCO2e per tonne
73110099 Containers of iron or steel, seamless, for compressed or liquefied gas, of a capacity of greater than or equal to 1.000l (excluding seamless containers and containers specifically constructed or equipped for one or more types of transport) 6.557 tCO2e per tonne
73181100 Coach screws of iron or steel 3.332 tCO2e per tonne
73181210 Wood screws of stainless steel (excluding coach screws) 6.635 tCO2e per tonne
73181290 Wood screws of iron or steel other than stainless (excluding coach screws) 2.968 tCO2e per tonne
73181300 Screw hooks and screw rings, of iron or steel 3.176 tCO2e per tonne
73181410 Self-tapping screws, of stainless steel (excluding wood screws) 5.352 tCO2e per tonne
73181491 Spaced-thread screws of iron or steel other than stainless 2.935 tCO2e per tonne
73181499 Self-tapping screws of iron or steel other than stainless (excluding spaced-thread screws and wood screws) 3.013 tCO2e per tonne
73181520 Screws and bolts, of iron or steel “whether or not with their nuts and washers”, for fixing railway track construction material (excluding coach screws) 3.968 tCO2e per tonne
73181535 Screws and bolts, of stainless steel “whether or not with their nuts and washers”, without heads (excluding screws and bolts for fixing railway track construction material) 6.139 tCO2e per tonne
73181542 Screws and bolts, of iron or steel other than stainless “whether or not with their nuts and washers”, without heads, with a tensile strength of less than 800 MPa (excluding screws and bolts for fixing railway track construction material) 6.804 tCO2e per tonne
73181548 Screws and bolts, of iron or steel other than stainless “whether or not with their nuts and washers”, without heads, with a tensile strength of greater than or equal to 800 MPa (excluding screws and bolts for fixing railway track construction material) 6.770 tCO2e per tonne
73181552 Screws and bolts, of stainless steel “whether or not with their nuts and washers”, with slotted or cross-recessed heads (excluding wood screws and self-tapping screws) 4.654 tCO2e per tonne
73181558 Screws and bolts, of iron or steel other than stainless “whether or not with their nuts and washers”, with slotted or cross-recessed heads (excluding wood screws and self-tapping screws) 5.915 tCO2e per tonne
73181562 Hexagonal-socket head screws and bolts, of stainless steel “whether or not with their nuts and washers” (excluding wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) 6.371 tCO2e per tonne
73181568 Hexagonal-socket head screws and bolts, of iron or steel other than stainless “whether or not with their nuts and washers” (excluding wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) 5.686 tCO2e per tonne
73181575 Hexagon screws and bolts, of stainless steel “whether or not with their nuts and washers” (excluding with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) 6.597 tCO2e per tonne
73181582 Hexagon screws and bolts, of iron or steel other than stainless “whether or not with their nuts and washers”, with a tensile strength of less than 800 MPa (excluding with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) 4.796 tCO2e per tonne
73181588 Hexagon screws and bolts, of iron or steel other than stainless “whether or not with their nuts and washers”, with a tensile strength of greater than or equal to 800 MPa (excluding with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) 6.077 tCO2e per tonne
73181595 Screws and bolts, of iron or steel “whether or not with their nuts and washers”, with heads (excluding with slotted, cross-recessed or hexagonal head; wood screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings) 5.584 tCO2e per tonne
73181631 Blind rivet nuts of stainless steel 5.229 tCO2e per tonne
73181639 Nuts of stainless steel (excluding blind rivet nuts) 5.166 tCO2e per tonne
73181640 Blind rivet nuts of iron or steel other than stainless 4.726 tCO2e per tonne
73181660 Self-locking nuts of iron or steel other than stainless 4.753 tCO2e per tonne
73181692 Nuts of iron or steel other than stainless, with an inside diameter less than or equal to 12mm (excluding blind rivet nuts and self-locking nuts) 4.431 tCO2e per tonne
73181699 Nuts of iron or steel other than stainless, with an inside diameter greater than 12mm (excluding blind rivet nuts and self-locking nuts) 4.890 tCO2e per tonne
73181900 Threaded articles, of iron or steel, not elsewhere specified 3.226 tCO2e per tonne
73182100 Spring washers and other lock washers, of iron or steel 2.552 tCO2e per tonne
73182200 Washers of iron or steel (excluding spring washers and other lock washers) 4.973 tCO2e per tonne
73182300 Rivets of iron or steel (excluding tubular and bifurcated rivets for particular uses) 2.919 tCO2e per tonne
73182400 Cotters and cotter pins, of iron or steel 2.902 tCO2e per tonne
73182900 Non-threaded articles, of iron or steel 3.283 tCO2e per tonne
73261100 Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked 3.493 tCO2e per tonne
73261910 Articles of iron or steel, open-die forged, but not further worked, not elsewhere specified (excluding grinding balls and similar articles for mills) 4.124 tCO2e per tonne
73261990 Articles of iron or steel, closed-die forged or stamped, but not further worked, not elsewhere specified (excluding grinding balls and similar articles for mills) 3.528 tCO2e per tonne
73262000 Articles of iron or steel wire, not elsewhere specified 3.309 tCO2e per tonne
73269030 Ladders and steps, of iron or steel 3.367 tCO2e per tonne
73269040 Pallets and similar platforms for handling goods, of iron or steel 3.294 tCO2e per tonne
73269050 Reels for cables, piping and the like, of iron or steel 3.039 tCO2e per tonne
73269060 Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, not elsewhere specified, of iron or steel 3.676 tCO2e per tonne
73269092 Articles of iron or steel, open-die forged, not elsewhere specified 3.246 tCO2e per tonne
73269094 Articles of iron or steel, closed-die forged, not elsewhere specified 3.158 tCO2e per tonne
73269096 Sintered articles of iron or steel, not elsewhere specified 3.369 tCO2e per tonne
73269098 Articles of iron or steel, not elsewhere specified 3.439 tCO2e per tonne