Skip to main content
Guidance

7. Automatic labelling

Published 10 November 2026

This guidance is part of a series for UK government departments on how to set up Microsoft Information Protection to align with the requirements of the Government Security Classification Policy (GSCP). This section explains automatic labelling.

7.1. Summary

When an email is sent to another organisation, the sensitivity label applied by the sender is not automatically applied in the recipient organisation’s M365 environment. When the recipient replies to or forwards an email, they may be prompted to apply an equivalent label manually to maintain the original classification. Although this action may take only a short time for each message, repeated manual labelling can create unnecessary effort and introduce risk in inconsistent classification. This policy must be applied in both the sending and receiving M365 environments. It is a bi-directional policy to improve the overall user experience: 

  • A DLP policy marks the outbound email meta data with the associated sensitivity label, providing the benefit to the recipient organisation 

  • Upon receipt of an email with the correctly marked meta-data, an auto-labelling policy in the recipient organisation applies the associated sensitivity label, providing benefit to their users. 

To improve cross-organisation classification, a Data Loss Prevention (DLP) policy can be used to write the sender’s applied classification into the outbound email metadata. The receiving organisation’s M365 environment can then use an auto-labelling policy to detect this metadata value and apply the equivalent sensitivity label automatically. This reduces the need for users to manually label replies or forwarded messages and helps maintain consistent classification between organisations.

7.2. Prerequisites

Auto-labelling is dependent on Purview Audit being enabled. To enable Audit, follow the instructions in this Microsoft Purview Audit article

7.3. Policy Creation Overview

This section details the process for creating a Data Loss Prevention (DLP) policy in Purview, named ‘Email - Header Classification Marking’, targeted at Exchange outbound emails.

Only the classifications that do not use encryption can be used for Automatic labelling. These consist of:

  • Official - For Public Release
  • Official
  • Official - HMG Use Only
  • Official - Embargoed
  • Official-Sensitive
  • Official-Sensitive - HMG Use Only
  • Official-Sensitive - Embargoed

7.4. Header Marking Policy Configuration

The tables below detail the configuration steps for creating a single DLP policy and individual rules nested within the policy for each of the labels required to be configured. 

Portal – Purview Admin Centre – Data Loss Prevention - Policies 

DLP policy item Configuration Action
Template Choose a template Custom policy
Name your DLP policy Name Email Header Classification Marking
Name your DLP policy Description Adds the classification marking to the email header to support Auto Apply labelling
Choose were to apply the policy Policy scope Exchange email
Customised advanced DLP rules Advanced DLP rules Create rule (create an individual rule for each header marking, follow the instructions below)
Rule item Configuration Action
Name Name your rule Header – Official – For Public Release
Conditions Content contains Sensitivity Label = OFFICIAL – For Public Release
Conditions AND Grouping Toggle NOT
Conditions Header Matches Pattern Classification: HMG=OFFICIAL-FOR PUBLIC RELEASE
Actions Set headers Classification: HMG= OFFICIAL-FOR PUBLIC RELEASE
User notifications Use notifications to inform your users and help educate them on the proper use of sensitive info Off
Incident reports Send an alert to admins when a rule match occurs Off
Incident reports Use email incident reports to notify you when a policy match occurs. Off
Additional options Evaluate rule per component Off
Rule item Configuration Action
Name Name your rule Header – Official
Conditions Content contains Sensitivity Label = OFFICIAL
Conditions AND Grouping Toggle NOT
Conditions Header Matches Pattern Classification: HMG=OFFICIAL
Actions Set headers Classification: HMG= OFFICIAL
User notifications Use notifications to inform your users and help educate them on the proper use of sensitive info Off
Incident reports Send an alert to admins when a rule match occurs Off
Incident reports Use email incident reports to notify you when a policy match occurs. Off
Additional options Evaluate rule per component Off
Rule item Configuration Action
Name Name your rule Header – Official – HMG Use Only
Conditions Content contains Sensitivity Label = OFFICIAL-HMG USE ONLY
Conditions AND Grouping Toggle NOT
Conditions Header Matches Pattern Classification: HMG= OFFICIAL-HMG USE ONLY
Actions Set headers Classification: HMG= OFFICIAL-HMG USE ONLY
User notifications Use notifications to inform your users and help educate them on the proper use of sensitive info Off
Incident reports Send an alert to admins when a rule match occurs Off
Incident reports Use email incident reports to notify you when a policy match occurs. Off
Additional options Evaluate rule per component Off
Rule item Configuration Action
Name Name your rule Header – Official – Embargoed
Conditions Content contains Sensitivity Label = OFFICIAL-EMBARGOED
Conditions AND Grouping Toggle NOT
Conditions Header Matches Pattern Classification: HMG= OFFICIAL-EMBARGOED
Actions Set headers Classification: HMG= OFFICIAL-EMBARGOED
User notifications Use notifications to inform your users and help educate them on the proper use of sensitive info Off
Incident reports Send an alert to admins when a rule match occurs Off
Incident reports Use email incident reports to notify you when a policy match occurs. Off
Additional options Evaluate rule per component Off
Rule item Configuration Action
Name Name your rule Header – Official-Sensitive
Conditions Content contains Sensitivity Label = OFFICIAL- SENSITIVE
Conditions AND Grouping Toggle NOT
Conditions Header Matches Pattern Classification: HMG= OFFICIAL-SENSITIVE
Actions Set headers Classification: HMG= OFFICIAL-SENSITIVE
User notifications Use notifications to inform your users and help educate them on the proper use of sensitive info Off
Incident reports Send an alert to admins when a rule match occurs Off
Incident reports Use email incident reports to notify you when a policy match occurs. Off
Additional options Evaluate rule per component Off
Rule item Configuration Action
Name Name your rule Header – Official-Sensitive – HMG Use Only
Conditions Content contains Sensitivity Label = OFFICIAL-SENSITIVE-HMG USE ONLY
Conditions AND Grouping Toggle NOT
Conditions Header Matches Pattern Classification: HMG= OFFICIAL-SENSITIVE-HMG USE ONLY
Actions Set headers Classification: HMG= OFFICIAL-SENSITIVE-HMG USE ONLY
User notifications Use notifications to inform your users and help educate them on the proper use of sensitive info Off
Incident reports Send an alert to admins when a rule match occurs Off
Incident reports Use email incident reports to notify you when a policy match occurs. Off
Additional options Evaluate rule per component Off
Rule item Configuration Action
Name Name your rule Header – Official-Sensitive – Embargoed
Conditions Content contains Sensitivity Label = OFFICIAL-SENSITIVE- EMBARGOED
Conditions AND Grouping Toggle NOT
Conditions Header Matches Pattern Classification: HMG= OFFICIAL-SENSITIVE- EMBARGOED
Actions Set headers Classification: HMG= OFFICIAL-SENSITIVE- EMBARGOED
User notifications Use notifications to inform your users and help educate them on the proper use of sensitive info Off
Incident reports Send an alert to admins when a rule match occurs Off
Incident reports Use email incident reports to notify you when a policy match occurs. Off
Additional options Evaluate rule per component Off

NB: The policy can be switched on immediately or placed in simulation mode. 

7.5. Auto Apply Labelling Policy Configuration 

Upon receipt of an email, the below auto labelling policies will read the email header, as defined in the previous configuration, and automatically assign the equivalent sensitivity label. 

It is advised to run these policies initially in simulation mode for testing before turning on. The successful result should be the correct sensitivity label is automatically applied to an email when it is replied to or forwarded on. 

Portal: Purview Admin Centre - Information Protection - Policies - Auto-labelling policies 

Policy item Configuration Action
Name your auto-labelling policy Name Email Auto Apply Label – Official – For Public Release policy
Choose a label to auto-apply Label to auto-apply Official – For Public Release
Choose locations where you want to apply the label Location Exchange email
Create rules for Exchange email Create rule New rule
Edit rule Rule Name Email Auto Apply Label – Official – For Public Release rule
Add condition Select Header matches patterns
Add condition Header name Classification
Add condition Regular expression ^HMG=OFFICIAL\s-\sFOR\s+PUBLIC\s+RELEASE$
Additional label settings Emails only Ticked
Decide if you want to test out the policy now or later Deploy Run in simulation mode to gather metrics or switch the policy on
Policy item Configuration Action
Name your auto-labelling policy Name Email Auto Apply Label – Official policy
Choose a label to auto-apply Label to auto-apply Official
Choose locations where you want to apply the label Location Exchange email
Create rules for Exchange email Create rule New rule
Edit rule Rule Name Email Auto Apply Label – Official rule
Add condition Select Header matches patterns
Add condition Header name Classification
Add condition Regular expression ^HMG=OFFICIAL$
Additional label settings Emails only Ticked
Decide if you want to test out the policy now or later Deploy Run in simulation mode to gather metrics or switch the policy on
Policy item Configuration Action
Name your auto-labelling policy Name Email Auto Apply Label – Official – HMG Use Only policy
Choose a label to auto-apply Label to auto-apply Official – HMG Use Only
Choose locations where you want to apply the label Location Exchange email
Create rules for Exchange email Create rule New rule
Edit rule Rule Name Email Auto Apply Label – Official – HMG Use Only rule
Add condition Select Header matches patterns
Add condition Header name Classification
Add condition Regular expression ^HMG=OFFICIAL\s-\sHMG\s+USE\s+ONLY$
Additional label settings Emails only Ticked
Decide if you want to test out the policy now or later Deploy Run in simulation mode to gather metrics or switch the policy on
Policy item Configuration Action
Name your auto-labelling policy Name Email Auto Apply Label – Official – Embargoed policy
Choose a label to auto-apply Label to auto-apply Official – Embargoed
Choose locations where you want to apply the label Location Exchange email
Create rules for Exchange email Create rule New rule
Edit rule Rule Name Email Auto Apply Label – Official – Embargoed rule
Add condition Select Header matches patterns
Add condition Header name Classification
Add condition Regular expression ^HMG=OFFICIAL\s-\sEMBARGOED$
Additional label settings Emails only Ticked
Decide if you want to test out the policy now or later Deploy Run in simulation mode to gather metrics or switch the policy on
Policy item Configuration Action
Name your auto-labelling policy Name Email Auto Apply Label – Official-Sensitive policy
Choose a label to auto-apply Label to auto-apply Official-Sensitive
Choose locations where you want to apply the label Location Exchange email
Create rules for Exchange email Create rule New rule
Edit rule Rule Name Email Auto Apply Label – Official-Sensitive rule
Add condition Select Header matches patterns
Add condition Header name Classification
Add condition Regular expression ^HMG= OFFICIAL-SENSITIVE$
Additional label settings Emails only Ticked
Decide if you want to test out the policy now or later Deploy Run in simulation mode to gather metrics or switch the policy on
Policy item Configuration Action
Name your auto-labelling policy Name Email Auto Apply Label – Official-Sensitive – HMG Use Only policy
Choose a label to auto-apply Label to auto-apply Official-Sensitive – HMG Use Only
Choose locations where you want to apply the label Location Exchange email
Create rules for Exchange email Create rule New rule
Edit rule Rule Name Email Auto Apply Label – Official-Sensitive – HMG Use Only rule
Add condition Select Header matches patterns
Add condition Header name Classification
Add condition Regular expression ^HMG=OFFICIAL-SENSITIVE\s-\sHMG\s+USE\s+ONLY$
Additional label settings Emails only Ticked
Decide if you want to test out the policy now or later Deploy Run in simulation mode to gather metrics or switch the policy on
Policy item Configuration Action
Name your auto-labelling policy Name Email Auto Apply Label – Official-Sensitive – Embargoed policy
Choose a label to auto-apply Label to auto-apply Official-Sensitive – Embargoed
Choose locations where you want to apply the label Location Exchange email
Create rules for Exchange email Create rule New rule
Edit rule Rule Name Email Auto Apply Label – Official-Sensitive – Embargoed rule
Add condition Select Header matches patterns
Add condition Header name Classification
Add condition Regular expression ^HMG=OFFICIAL-SENSITIVE\s-\sEMBARGOED$
Additional label settings Emails only Ticked
Decide if you want to test out the policy now or later Deploy Run in simulation mode to gather metrics or switch the policy on

Previous - Data loss prevention controls configuration guidance.

Next - Holding labels guidance.