Correction to the designs register under section 21: 6520890
Published 30 September 2026
© Crown copyright 2026
This publication is licensed under the terms of the Open Government Licence v3.0 except where otherwise stated. To view this licence, visit nationalarchives.gov.uk/doc/open-government-licence/version/3 or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: psi@nationalarchives.gov.uk.
Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concerned.
This publication is available at https://www.gov.uk/government/publications/correction-to-the-designs-register-under-section-21-6520890/correction-to-the-designs-register-under-section-21-6520890
This notice sets out the procedures to be followed and provides for an opportunity to be heard before any correction is made.
We have become aware that we have recorded the incorrect images in respect of the following registered design 6520890. The design has been published with the representations filed with the application rather than the amended representations subsequently supplied by the applicant. We therefore propose to replace the images currently recorded on the register with the amended images provided by the applicant.
Top view of a tall beverage can showing the ring-pull opening feature in broken lines, with the top of a sachet visible on the right-hand side of the can adjacent to a band extending around the can.
Side view of a tall cylindrical beverage can showing a rectangular sachet on the right-hand side and a band extending around the can.
Front view of a tall cylindrical beverage can showing a rectangular sachet positioned centrally on the front of the can and a band extending around the can.
Bottom view of a tall cylindrical beverage can showing a rectangular sachet projecting from the right-hand side and a band extending around the can.
Perspective view of a tall cylindrical beverage can showing a rectangular sachet positioned on the front-right side of the can and a band extending around the can.
Perspective view of a tall cylindrical beverage can showing a rectangular sachet positioned on the right-hand side of the can and a band extending around the can.
Perspective view of a tall cylindrical beverage can showing a rectangular sachet positioned on the rear-right side of the can and a band extending around the can.
Perspective view of a tall cylindrical beverage can showing a band extending around the can.
Perspective view of a tall cylindrical beverage can showing a rectangular sachet positioned on the rear-left side of the can and a band extending around the can.
Perspective view of a tall cylindrical beverage can showing a rectangular sachet positioned on the left-hand side of the can and a band extending around the can.
Perspective view of a tall cylindrical beverage can showing a rectangular sachet positioned on the front-left side of the can and a band extending around the can.
Perspective view of a tall cylindrical beverage can showing a rectangular sachet positioned centrally on the front of the can and a band extending around the can.
Opportunity to object
To make this correction we are using the process set out at section 21 of the Registered Designs Act 1949. Under this process, owners of registered designs, an applicant for the registration of a design, and others who have an interest, may request a hearing if they do not think the register should be corrected. We will offer this opportunity when we write to the owners of affected designs (or their representative).
If you have an interest in the registered design and are not the owner of the right, you must contact us within 28 days from the date of this notice if you would like a hearing. A hearing is a formal process where you will be given the opportunity to explain your case to a senior official known as a Hearing Officer.
When the correction will be made
The correction will be made after the 28 days to request a hearing has expired. The corrected information will be visible on our Find a registered design service.
We are very sorry for any inconvenience this error may have caused. If you have queries regarding this notice, please contact us on the following email address: designs.managers@ipo.gov.uk.