Notice

Taxation notice 2020/09: anti-dumping duty on high fatigue performance steel concrete reinforcement bar (rebar) originating in the People's Republic of China

Updated 1 March 2023

This notice was originally published on 31 December 2020 and was superseded by Trade remedies notice 2023/03 on 1 March 2023.

This notice is published under regulation 96A(1) of the Trade Remedies (Dumping and Subsidisation) (EU Exit) Regulations 2019.

Transition of EU trade remedies measure

This notice gives effect to the EU trade remedies measure specified in the Notice of determination 2020/09: anti-dumping duty on high fatigue performance steel concrete reinforcement bar (rebar) originating in the People’s Republic of China.

Duty amount and additional TAP codes

The additional amount of import duty (the anti-dumping duty) applicable to the net, free-at-the-frontier price, before other amounts of import duty, of goods subject to duty (described below) originating in the People’s Republic of China is specified in Table 1.

Overseas exporters Duty amount Additional TAP code
Jiangsu Lianfeng Industrial Co., Ltd, Zhangjiagang 22.5% C063
Jiangsu Yonggang Group Co., Ltd, Zhangjiagang 22.5% C062
Jiangyin Ruihe Metal Products Co., Ltd, Jiangyin 18.4% C061
Jiangyin Xicheng Steel Co., Ltd, Jiangyin 18.4% C060
Zhangjiagang Hongchang High Wires Co., Ltd, Zhangjiagang 22.5% C064
Zhangjiagang Shatai Steel Co., Ltd, Zhangjiagang 22.5% C065
All other overseas exporters (residual amount) 22.5% C999

Declaration required to qualify for duty amount

In order to qualify for the duty amount applicable to goods produced by an overseas exporter specified in Table 1, a valid commercial invoice with an accompanying declaration must be presented to HMRC on importation of the goods. The text of the declaration is set out in the Annex.

If an invoice is not presented, or the declaration is not made, the residual amount is the duty amount applicable to the goods.

Goods subject to duty

The duty specified in Table 1 applies to goods described, or imported under a commodity code specified, below.

Goods description:

High fatigue performance iron or steel concrete reinforcing bars and rods made of iron, non-alloy steel or alloy steel (but excluding of stainless steel, high-speed steel and silico-manganese steel), not further worked than hot-rolled, but including those twisted after rolling. These bars and rods contain indentations, ribs, grooves or other deformations produced during the rolling process or are twisted after rolling; The key characteristic of high fatigue performance is the ability to endure repeated stress without breaking and, specifically, the ability to resist in excess of 4.5 million fatigue cycles using a stress ratio (min/max) of 0.2 and a stress range exceeding 150 MPa.

Commodity codes

  • 72 14 20 00 10
  • 72 28 30 20 10
  • 72 28 30 41 10
  • 72 28 30 49 10
  • 72 28 30 61 10
  • 72 28 30 69 10
  • 72 28 30 70 10
  • 72 28 30 89 10

Imposition date

This notice takes effect, and the duty applies, on replacement of EU trade duty.

Expiry date

The duty applies until either:

  • 30 July 2021; or
  • the date the Secretary of State specifies in a notice published under regulation 101C(2)(a) of the Trade Remedies (Dumping and Subsidisation) (EU Exit) Regulations 2019.

Note: Regulation 97C of the Trade Remedies (Dumping and Subsidisation) (EU Exit) Regulations 2019 provides that a duty that would otherwise expire during a transition review continues to apply until the review concludes.

Duty subject to transition review

The duty applied by this notice is subject to a transition review under regulation 97(2)(b) Trade Remedies (Dumping and Subsidisation) (EU Exit) Regulations 2019.

Information on investigations and reviews may be found on the Trade Remedies Service website.

The Rt Hon Liz Truss MP

Secretary of State for International Trade

Annex: Declaration required to qualify for specified overseas exporter duty amount

The following declaration must be completed, dated and signed by an official of the entity issuing the valid commercial invoice who is identifiable by name and function:

“I, the undersigned, certify that the [volume] of [goods] sold for export to the United Kingdom included in this invoice was produced by [company name and address] ([TAP additional code]) in [country]. I declare that the information provided in this invoice is complete and correct.

Date:

Signature:

Name (printed):”

Note: If an invoice is not presented, or the declaration is not made, the residual amount is the duty amount applicable to the goods.