-
Bumpers and parts thereof
870810
-
For the industrial assembly of:
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587081010 -
Other
87081090
-
For the industrial assembly of:
-
Other parts and accessories of bodies (including cabs)
-
Safety seat belts
870821
-
For the industrial assembly of:
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870520%2.00 %p/st8708211000 -
Other20%4.00 %p/st8708219000
-
-
Front windscreens (windshields), rear windows and other windows specified in subheading note 1 to this chapter
870822
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870520%2.00 %8708221000 -
Other20%4.00 %8708229000
-
-
Other
870829
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870520%2.00 %8708291000 -
Other20%4.00 %8708299000
-
-
Safety seat belts
-
Brakes and servo-brakes; parts thereof
870830
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587083010-
Motor powered brake actuation unit
- with a rating of 13.5 v (±0.5v) and
- a ball screw mechanism to control brake fluid pressure in the master cylinder
for use in the manufacture of electric motor vehicles20%2.00 %p/st8708301020 -
Body of disc type brake in bir ("ball in ramp") or epb ("electronic parking brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of chapter 8720%2.00 %p/st8708301040
-
Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of chapter 8720%2.00 %p/st8708301060
-
Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of chapter 8720%2.00 %p/st8708301070
-
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 2.00 % No code 2.00 % No code 2.00 % 8708301090
-
-
Other
-
For disc brakes
87083091
-
Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of chapter 8720%4.00 %p/st8708309120
-
Body of disc type brake in bir ("ball in ramp") or epb ("electronic parking brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of chapter 8720%4.00 %p/st8708309130
-
Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of chapter 8720%4.00 %p/st8708309140
-
Motor powered brake actuation unit
- with a rating of 13.5 v (±0.5v) and
- a ball screw mechanism to control brake fluid pressure in the master cylinder
for use in the manufacture of electric motor vehicles20%4.00 %p/st8708309160 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 4.00 % No code 4.00 % 8708309190
-
-
Other
87083099
-
Motor powered brake actuation unit -with a rating of 13.5 v (±0.5v) and -a ball screw mechanism to control brake fluid pressure in the master cylinderfor use in the manufacture of electric motor vehicles20%
Depends on additional code Code Duty 2700 0.00 % 2701 4.00 % No code 4.00 % p/st8708309910 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 4.00 % No code 4.00 % 8708309990
-
-
For disc brakes
-
For the industrial assembly of:
-
Gear boxes and parts thereof
870840
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587084020-
Automatic hydrodynamic gearbox
- with a hydraulic torque converter,
- without transfer box and cardan shaft,
- whether or not with front differential,
for use in the manufacture of motor vehicles of chapter 8720%2.00 %p/st8708402020 -
Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting:
-cast aluminium body,-differential gear,
-2 electrical motors and gears,
with the dimensions of:
-a width of 280 mm or more but not more than 470 mm,
-a height of 350 mm or more but not more than 595 mm,
-a length of 410 mm or more but not more than 690 mm,
for use in the manufacture of motor vehicles of chapter 8720%2.00 %8708402050 -
Automatic transmission assembly with rotary gear shifter with:
-aluminium casting housing,
-differential gear,
-9 speed automatic,
-electronic range select gear selection system,
with dimensions of:
-a width of 330 mm or more but not more than 420 mm,
-a height of 380 mm or more but not more than 450 mm,
-a length of 580 mm or more but not more than 690 mm,
for use in the manufacture of the vehicles in heading 8720%2.00 %8708402060 -
Manual gearbox in cast aluminium housing for transverse installation with:
-a width of not more than 480 mm,
-a height of not more than 400 mm,
-a length of not more than 550 mm,
-five or six gears,
-a differential gear,
-an engine torque of 400 nm or less,
for use in the manufacture of motor vehicles of heading 870320%0.00 %8708402070 -
Transmission gearbox without torque converter, with:
-dual clutch,
-7 or more forward gears,
-1 reverse gear,
-a maximum torque of 390 nm,
-whether or not with electric motor integrated,
-a height of 400 mm or more but not more than 600 mm,
-a width of 350 mm or more but not more than 600 mm, and
-a weight of 70kg or more but not more than 110 kg,
for use in the manufacture of motor vehicles of heading 870320%0.00 %p/st8708402080 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 2.00 % No code 2.00 % 8708402090
-
-
Other
-
Gear boxes
87084050
-
Automatic hydrodynamic gearbox
- with a hydraulic torque converter,
- without transfer box and cardan shaft,
- whether or not with front differential,
for use in the manufacture of motor vehicles of chapter 8720%4.00 %p/st8708405010 -
Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting:
-cast aluminium body,-differential gear,
-2 electrical motors and gears,
with the dimensions of:
-a width of 280 mm or more but not more than 470 mm,
-a height of 350 mm or more but not more than 595 mm,
-a length of 410 mm or more but not more than 690 mm,
for use in the manufacture of motor vehicles of chapter 8720%4.00 %8708405040 -
Automatic transmission assembly with rotary gear shifter with:
-aluminium casting housing,
-differential gear,
-9 speed automatic,
-electronic range select gear selection system,
with dimensions of:
-a width of 330 mm or more but not more than 420 mm,
-a height of 380 mm or more but not more than 450 mm,
-a length of 580 mm or more but not more than 690 mm,
for use in the manufacture of the vehicles in heading 8720%4.00 %8708405050 -
Manual gearbox in cast aluminium housing for transverse installation with:
-a width of not more than 480 mm,
-a height of not more than 400 mm,
-a length of not more than 550 mm,
-five or six gears,
-a differential gear,
-an engine torque of 400 nm or less,
for use in the manufacture of motor vehicles of heading 870320%4.00 %8708405060 -
Automatic transmission equipped with double clutch system with:
-at least 8 gears,
-an engine torque of 800 nm or more,
-an electronic differential,
-a p-lock safety system, and
-a tcu transmission control unit,
for use in the manufacture of motor vehicles of heading 870320%4.00 %8708405070 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 4.00 % No code 4.00 % 8708405090
-
-
Parts
-
Gear boxes
-
For the industrial assembly of:
-
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
870850
-
For the industrial assembly of:
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587085020-
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened20%2.00 %8708502015
-
Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of:
-two cardan rods,
-central universal joint,
-central bearing with suspension in a plastic cover,
-universal joints on both ends of the shaft,
-slip, tube and end yokes,
-of a length of 1.4 m or more but not more than 2.4 m,
for use in the production of goods of chapter 8720%2.00 %8708502018 -
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
- of a length of 1 m or more but not more than 2 m,
- of a weight of 6 kg or more but not more than 9 kg20%2.00 %p/st8708502020 -
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
-6 ball tracks or more but not more than 8, with
-a thread,
-an external involute spline with 21 or more but not more than 38 teeth,
-for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%,
-forged, turned, milled and hardened20%2.00 %8708502025 -
Inboard constant velocity joint tripod housing, with:
-an outer diameter of 67.0 mm or more but not more than 99.0 mm,
-3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm,
-an external spline with 21 teeth or more but not more than 41,
-forged, turned, rolled and hardened20%2.00 %8708502035 -
Outboard constant velocity joint inner race, part of the vehicle's drive system, with:
-6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12.0 mm or more but not more than 24.0 mm,
-forged, turned, milled, broached and hardened20%2.00 %8708502045 -
Double flange bearing of 3rd generation, for motor vehicles,
- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (abs) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of chapter 8720%2.00 %8708502050 -
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:
-3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm,
-forged, turned, broached and hardened20%2.00 %8708502055 -
Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:
- at least an actuator,
- whether or not an interior distribution by chain20%2.00 %8708502060 -
Intermediate steel shaft connecting the gearbox with semi-axle with:
-a length of 300 mm or more but not more than 650 mm,
-a spline end on both sides,
-whether or not with a pressed bearing in the case,
-whether or not with a holder
for use in the manufacture of goods of chapter 8720%2.00 %8708502065 -
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:
-an outer diameter of 67.0 mm or more but not more than 84.5 mm,
-3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm,
- sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle,
-spline with 21 teeth or more but not more than 35,
-bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves20%2.00 %8708502070 -
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:
-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15.0 mm or more but not more than 20.0 mm,
-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 26 teeth or more but not more than 38,
-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.25%, and
-with a grease compartment,
capable of working at constant speed at variable articulation angle not higher than 50 degrees20%2.00 %8708502075 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 2.00 % No code 2.00 % No code 2.00 % 8708502090
-
-
Other
-
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles20%4.00 %8708503500
-
Parts
-
Of closed-die forged steel
87085055
-
Double flange bearing of 3rd generation, for motor vehicles,
- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (abs) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of chapter 8720%4.00 %8708505520 -
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened20%4.00 %8708505550
-
Other20%4.00 %8708505590
-
-
Other
-
For non-driving axles
87085091
-
Double flange bearing of 3rd generation, for motor vehicles,
- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (abs) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of chapter 8720%4.00 %8708509110 -
Other20%4.00 %8708509190
-
-
Other
87085099
-
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
- of a length of 1 m or more but not more than 2 m,
- of a weight of 6 kg or more but not more than 9 kg20%2.00 %p/st8708509910 -
Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:
- at least an actuator,
- whether or not an interior distribution by chain20%2.00 %8708509915 -
Intermediate steel shaft connecting the gearbox with semi-axle with:
-a length of 300 mm or more but not more than 650 mm,
-a spline end on both sides,
-whether or not with a pressed bearing in the case,
-whether or not with a holder
for use in the manufacture of goods of chapter 8720%2.00 %8708509920 -
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:
-an outer diameter of 67.0 mm or more but not more than 84.5 mm,
-3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm,
- sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle,
-spline with 21 teeth or more but not more than 35,
-bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves20%2.00 %8708509925 -
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:
-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15.0 mm or more but not more than 20.0 mm,
-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 26 teeth or more but not more than 38,
-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.25%, and
-with a grease compartment,
capable of working at constant speed at variable articulation angle not higher than 50 degrees20%2.00 %8708509935 -
Double flange bearing of 3rd generation, for motor vehicles,
- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (abs) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of chapter 8720%2.00 %8708509940 -
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
-6 ball tracks or more but not more than 8, with
-a thread,
-an external involute spline with 21 or more but not more than 38 teeth,
-for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%,
-forged, turned, milled and hardened20%2.00 %8708509945 -
Inboard constant velocity joint tripod housing, with:
-an outer diameter of 67.0 mm or more but not more than 99.0 mm,
-3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm,
-an external spline with 21 teeth or more but not more than 41,
-forged, turned, rolled and hardened20%2.00 %8708509950 -
Outboard constant velocity joint inner race, part of the vehicle's drive system, with:
-6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12.0 mm or more but not more than 24.0 mm,
-forged, turned, milled, broached and hardened20%2.00 %8708509955 -
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:
-3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm,
-forged, turned, broached and hardened20%2.00 %8708509960 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 2.00 % No code 2.00 % 8708509990
-
-
For non-driving axles
-
Of closed-die forged steel
-
-
For the industrial assembly of:
-
Road wheels and parts and accessories thereof
870870
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587087010-
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres
-
Other
-
Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, for the industrial assembly of vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm³ or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm³; vehicles of heading 8705
-
Other
-
Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, for the industrial assembly of vehicles of heading 8703; vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm³ or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm³; vehicles of heading 8705
-
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres
-
Other
-
Wheels of aluminium; parts and accessories of wheels, of aluminium
87087050
-
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres
-
Other
-
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres
-
Wheel centres in star form, cast in one piece, of iron or steel
87087091
-
Other
87087099
-
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
-
Other
-
Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, designed for
- road tractors,
- motor vehicles for the transport of persons and/or the transport of goods,
- special purpose motor vehicles (for example, fire fighting vehicles, spraying lorries);
excluding:
- wheels for road quad bikes,
- wheels for motor vehicles specifically designed for uses other than on public roads (for example, wheels for agricultural tractors or forestry tractors, for forklifts, for pushback tractors, for dumpers designed for off-highway use)20%4.00 %p/st8708709980 -
Other20%4.00 %8708709985
-
-
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
-
Wheels of aluminium; parts and accessories of wheels, of aluminium
-
For the industrial assembly of:
-
Suspension systems and parts thereof (including shock-absorbers)
870880
-
For the industrial assembly of:
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587088020 -
Other
-
Suspension shock-absorbers
87088035
-
Anti roll bars; other torsion bars20%2.00 %8708805500
-
Other
-
Of closed-die forged steel20%
Depends on additional code Code Duty 2700 0.00 % 2701 4.00 % No code 4.00 % 8708809100 -
Other
87088099
-
Aluminium suspension link arm, with dimensions of:
-a height of 50 mm or more but not more than 150 mm,
-a width of 10 mm or more but not more than 100 mm,
-a length of 100 mm or more but not more than 600 mm,
-a mass of 1000 g or more but not more than 3000 g,
equipped with at least two bushed holes made of aluminium alloy with the following characteristics:
-a tensile strength of 200 mpa or more ,
-a strength of 19 kn or more,
-a stiffness of 5 kn/mm or more but not more than 9 kn/mm,
-a frequency of 400 hz or more but not more than 600 hz20%2.00 %p/st8708809920 -
Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:
-with a chrome coating,
-of a diameter of 11 mm or more, but not more than 28 mm,
-of a length of 80 mm or more, but not more than 600 mm,
with a threaded end or a mandrel for resistance welding20%2.00 %8708809930 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 2.00 % No code 2.00 % 8708809990
-
-
-
Suspension shock-absorbers
-
For the industrial assembly of:
-
Other parts and accessories
-
Radiators and parts thereof
870891
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587089120-
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of chapter 8720%2.00 %p/st8708912020
-
Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard en ac 42100 or en ac 43000 t6 with - an insulating area flatness of not more than 0.1 mm, - a permissible particle quantity of 0.3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0.4 mm, and - not more than 3 pores larger than 0.2mm -with a weight of 0.2kg or more but not more than 3kg20%2.00 %p/st8708912030
-
Other20%2.00 %8708912090
-
-
Other
-
Radiators
87089135
-
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of chapter 8720%4.00 %p/st8708913510
-
Turbocharger cooling duct containing:
-an aluminum alloy duct with at least one metal holder and at least two mounting holes,
-a rubber pipe with clips,
-a stainless steel flange highly resistant to corrosion [sus430jil],
for use in the manufacture of compression ignition engines of motor vehicles20%4.00 %8708913520 -
Two-circuit aluminum heat exchanger for automatic transmission of passenger cars:
-of the stack-plate type,
-with two pairs of inlet and outlet, each for the coolant/water circuit and the transmission oil circuit,
-with at least two mounting holes,
-whether or not with the connection hoses,
for use in the manufacture of goods of chapter 8720%4.00 %8708913530 -
Other20%4.00 %8708913590
-
-
Parts
-
Of closed-die forged steel20%4.00 %8708919100
-
Other
87089199
-
Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard en ac 42100 or en ac 43000 t6 with - an insulating area flatness of not more than 0.1 mm, - a permissible particle quantity of 0.3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0.4 mm, and - not more than 3 pores larger than 0.2mm -with a weight of 0.2kg or more but not more than 3kg20%2.00 %p/st8708919930
-
Assembly for supplying compressed air, whether or not with a resonator, comprising at least:
- one solid aluminium tube whether or not with mounting bracket,
- one flexible rubber hose, and
- one metal clip
for use in the manufacture of goods of chapter 8720%2.00 %8708919940 -
Other20%2.00 %8708919990
-
-
-
Radiators
-
For the industrial assembly of:
-
Silencers (mufflers) and exhaust pipes; parts thereof
870892
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870520%2.00 %8708922000 -
Other
-
Silencers (mufflers) and exhaust pipes20%4.00 %8708923500
-
Parts
-
Of closed-die forged steel20%4.00 %8708929100
-
Other
87089299
-
Exhaust system inner liner:
-with a wall thickness of 0.7 mm or more but not more than 1.3 mm,
-made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm en 10088,
-whether or not with mounting holes
for use in the manufacture of exhaust systems for automobiles20%2.00 %8708929910 -
Pipe for guiding exhaust gases from the combustion engine:
-with a diameter of 40 mm or more but not more than 100 mm,
-with a length of 90 mm or more but not more than 410 mm,
-with a wall thickness of 0.7 mm or more but not more than 1.3 mm,
-of stainless steel
for use in the manufacture of exhaust systems for automobiles20%2.00 %8708929920 -
Exhaust system end cover:
-with a wall thickness of 0.7 mm or more but not more than 1.3 mm,
-made of stainless steel class 1.4310 and 1.4301 according to norm en 10088,
-whether or not with inner liner,
-whether or not with surface treatment
for use in the manufacture of exhaust systems for automobiles20%2.00 %8708929930 -
Other20%2.00 %8708929990
-
-
-
-
-
Clutches and parts thereof
870893
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587089310-
Clutch pedal with electronic parking brake connection (epb), whether or not with sending signal function for:
- cruise control reset,
- electronic parking brake release,
-start and stop engine management under idle stop and go system (isg),
for use in the manufacture of passenger vehicles20%0.00 %8708931040 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 2.00 % No code 2.00 % No code 2.00 % 8708931090
-
-
Other
87089390
-
Clutch pedal with electronic parking brake connection (epb), whether or not with sending signal function for:
- cruise control reset,
- electronic parking brake release,
-start and stop engine management under idle stop and go system (isg),
for use in the manufacture of passenger vehicles20%4.00 %8708939040 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 4.00 % No code 4.00 % 8708939090
-
-
For the industrial assembly of:
-
Steering wheels, steering columns and steering boxes; parts thereof
870894
-
For the industrial assembly of:
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587089420 -
Other
-
Steering wheels, steering columns and steering boxes
87089435
-
Parts
-
Steering wheels, steering columns and steering boxes
-
For the industrial assembly of:
-
Safety airbags with inflator system; parts thereof
870895
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587089510-
Inflatable safety cushion of high strength polyamide fibre:
- sewn,
- folded,
- with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing
- suitable for cool inflator technology20%2.00 %p/st8708951020 -
Inflatable sewn safety cushion of high strength polyamide fibre:
-folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or
-flat safety cushion with or without thermal folding20%2.00 %p/st8708951030 -
Other20%2.00 %p/st8708951090
-
-
Other
-
Of closed-die forged steel20%4.00 %8708959100
-
Other
87089599
-
Inflatable safety cushion of high strength polyamide fibre:
- sewn,
- folded,
- with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing
- suitable for cool inflator technology20%2.00 %p/st8708959930 -
Inflatable sewn safety cushion of high strength polyamide fibre:
-folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or
-flat safety cushion with or without thermal folding20%2.00 %p/st8708959940 -
Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more20%2.00 %p/st8708959950
-
Other20%
Depends on additional code Code Duty 2701 2.00 % No code 2.00 % 8708959990
-
-
-
For the industrial assembly of:
-
Other
870899
-
For the industrial assembly of:
pedestrian-controlled tractors of subheading 8701 10;
vehicles of heading 8703;
vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;
vehicles of heading 870587089910-
Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles20%2.00 %8708991025
-
Silicone or plastic keyboards, comprising:
-parts of common metal, and
-whether or not comprising parts of plastic,
-epoxy resin reinforced with fiberglass or wood,
-whether or not printed or surface-treated,
-with or without electrical conductors
-with or without a membrane bonded to the keyboard,
-with or without mono or multilayer protective film20%2.00 %p/st8708991055 -
Aluminium engine bracket, with dimensions of:
-height of more than 10 mm but not more than 200 mm,
-width of more than 10 mm but not more than 250 mm,
-length of more than 10 mm but not more than 200 mm,
equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics:
-internal porosity not more than 1 mm,
-outer porosity not more than 2 mm,
-rockwell hardness hrb 10 or more,
of a kind used in the production of suspensions systems for engines in motor vehicles20%2.00 %p/st8708991060 -
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 2.00 % No code 2.00 % 8708991090
-
-
Other
-
Of closed-die forged steel20%4.00 %8708999300
-
Other
87089997
-
Hydrostatic speed changer:
-with a hydro pump and a differential with wheel axle,
-whether or not with a fan impeller and/or a pulley,
for use in the manufacture of tractors of subheadings 8701 91 90 and 8701 92 90, whose main function is that of a lawn mower20%2.00 %8708999718 -
Silicone or plastic keyboards, comprising:
-parts of common metal, and
-whether or not comprising parts of plastic,
-epoxy resin reinforced with fiberglass or wood,
-whether or not printed or surface-treated,
-with or without electrical conductors
-with or without a membrane bonded to the keyboard,
-with or without mono or multilayer protective film20%2.00 %p/st8708999722 -
A set of type 4 h2 cylinders, in accordance with the ec 79 standard, consisting of two to eight cylinders on aluminum frames:
-cylinders made of high density polyethylene (hdpe) composite reinforced with a braid of glass and carbon fibers in epoxy resin,
-with an operating pressure of not less than 35 mpa,
-with a durability declared by the manufacturer of not less than 20 years,
-with a cylinder capacity of 180 liters or more but not more than 375 liters,
-equipped with a set of solenoid, manual and safety prd valves,
-with a total width of 1 800 mm or more but not more than 2 300 mm,
-with a total height of 400 mm or more but not more than 500 mm,
-with a total length of 1 200 mm or more but not more than 3 600 mm20%2.00 %8708999728 -
A set of compressed natural gas (cng) cylinders type cng-4, in accordance with the ece r110 standard, consisting of four or five cylinders on aluminum frames:
-made of high density polyethylene (hdpe) composite reinforced with a braid of glass and carbon fibers in epoxy resin,
-with an operating pressure of not less than 20 mpa,
-with a shelf life declared by the manufacturer of not less than 20 years,
-with a cylinder capacity of 315 liters or more but not more than 375 liters,
-equipped with a set of solenoid, manual and safety prd valves,
-with a total width of 2 200 mm or more but not more than 2 300 mm,
-with a total height of 450 mm or more but not more than 460 mm,
-with a total length of 3500 mm or more but not more than 3 600 mm20%2.00 %8708999738 -
Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles20%2.00 %8708999745
-
Aluminium engine bracket, with dimensions of:
-height of more than 10 mm but not more than 200 mm,
-width of more than 10 mm but not more than 250 mm,
-length of more than 10 mm but not more than 200 mm,
equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics:
-internal porosity not more than 1 mm,
-outer porosity not more than 2 mm,
-rockwell hardness hrb 10 or more,
of a kind used in the production of suspensions systems for engines in motor vehicles20%2.00 %p/st8708999750 -
Assembly for supplying compressed air, whether or not with a resonator, comprising at least:
- one solid aluminium tube whether or not with mounting bracket,
- one flexible rubber hose, and
- one metal clip
for use in the manufacture of goods of chapter 8720%2.00 %8708999755 -
Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of chapter 8720%2.00 %p/st8708999775
-
Other20%
Depends on additional code Code Duty 2700 0.00 % 2701 2.00 % No code 2.00 % 8708999790
-
-
-
For the industrial assembly of:
-
Radiators and parts thereof
Heading 8708 - Parts and accessories of the motor vehicles of headings 8701 to 8705
- Heading
- 8708
- Classification
- Parts and accessories of the motor vehicles of headings 8701 to 8705
There are 141 commodities in this category. Choose the commodity code that best matches your goods to see more information. If your item is not listed by name, it may be shown under what it's used for, what it's made from or 'Other'.
There are important notes for classifying your goods shown further down this page
Code | Description |
---|---|
TN200 |
The export of these items may be controlled under the Export Control Order 2008 as amended. Please refer to the Goods Checker to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit. |
TN207 | The export of arms and WMD-related items; Aviation fuels; Condensates and natural gas liquid; Crude oil; Helicopters and vessels; Industrial machinery, vehicles, iron, steel and other metals; luxury goods; Refined petroleum products; gold and precious metals or diamonds to the Democratic People's Republic of Korea is controlled (as well as related activities). Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit. |
TN701 |
According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9) it shall be prohibited to import into European Union goods originating in Crimea or Sevastopol. The prohibition shall not apply in respect of: (a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established. (b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014 or in accordance with the EU-Ukraine Association Agreement. |
Chapter notes
-
This chapter does not cover railway or tramway rolling-stock designed solely for running on rails.
-
For the purposes of this chapter, ‘tractors’ means vehicles constructed essentially for hauling or pushing another vehicle, appliance or load, whether or not they contain subsidiary provision for the transport, in connection with the main use of the tractor, of tools, seeds, fertilisers or other goods.
Machines and working tools designed for fitting to tractors of heading 8701 as interchangeable equipment remain classified in their respective headings even if presented with the tractor, and whether or not mounted on it.
-
Motor chassis fitted with cabs fall in heading 8702 to 8704, and not in heading 8706.
-
Heading 8712 includes all children’s bicycles. Other children’s cycles fall in heading 9503.
Subheading Note
Subheading 8708 22 covers:
-
a. front windscreens (windshields), rear windows and other windows, framed; and
-
b. front windscreens (windshields), rear windows and other windows, whether or not framed, incorporating heating devices or other electrical or electronic devices
when suitable for use solely or principally with the motor vehicles of heading 8701 to 8705.
Additional chapter notes
-
Code 8703 10 18 includes mobility scooters which typically include a separate adjustable steering column, a horizontal platform, an adjustable seat, a steering column that can be folded down, thumb-operated levers for accelerating, braking and reversing. They are not specially designed for the transport of disabled persons as they have no special features to alleviate a dis-ability.
-
Heading 8713 does not include mobility scooters, see also the Additional chapter note to code 8703 10 18.
Section notes
-
This section does not cover articles of heading 9503 or 9508, or bobsleighs, toboggans or the like of heading 9506.
-
The expressions ‘parts’ and ‘parts and accessories’ do not apply to the following articles, whether or not they are identifiable as for the goods of this section:
a. joints, washers and the like of any material (classified according to their constituent material or in heading 8484) or other articles of vulcanised rubber other than hard rubber (heading 4016);
b. parts of general use, as defined in Note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39);
c. articles of Chapter 82 (tools);
d. articles of heading 8306;
e. machines or apparatus of heading 8401 to 8479, or parts thereof, other than the radiators for the articles of this Section; articles of heading 8481 or 8482 or, provided they constitute integral parts of engines or motors, articles of heading 8483;
f. electrical machinery or equipment (Chapter 85);
g. articles of Chapter 90;
h. articles of Chapter 91;
ij. arms (Chapter 93);
k. luminaires or lighting fittings and parts thereof of heading 9405;
l. brushes of a kind used as parts of vehicles (heading 9603).
-
References in Chapters 86 to 88 to ‘parts’ or ‘accessories’ do not apply to parts or accessories which are not suitable for use solely or principally with the articles of those chapters. A part or accessory which answers to a description in two or more of the headings of those chapters is to be classified under that heading which corresponds to the principal use of that part or accessory.
-
For the purposes of this Section:
a. vehicles specially constructed to travel on both road and rail are classified under the appropriate heading of Chapter 87;
b. amphibious motor vehicles are classified under the appropriate heading of Chapter 87;
c. aircraft specially constructed so that they can also be used as road vehicles are classified under the appropriate heading of Chapter 88.
-
Air-cushion vehicles are to be classified in this section with the vehicles to which they are most akin as follows:
a. in Chapter 86 if designed to travel on a guide-track (hovertrains);
b. in Chapter 87 if designed to travel over land or over both land and water;
c. in Chapter 89 if designed to travel over water, whether or not able to land on beaches or landing-stages or also able to travel over ice.
Parts and accessories of air-cushion vehicles are to be classified in the same way as those of vehicles of the heading in which the air-cushion vehicles are classified under the above provisions.
Hovertrain track fixtures and fittings are to be classified as railway track fixtures and fittings, and signalling, safety or traffic control equipment for hovertrain transport systems as signalling, safety or traffic control equipment for railways.
Additional section notes
-
Subject to the provisions of additional chapter note 3 to Chapter 89, tools and articles necessary for the maintenance or repair of vehicles, aircraft or vessels are to be classified with those vehicles, aircraft or vessels if presented with them. Other accessories presented with vehicles, aircraft or vessels are also to be classified therewith, if they form part of the normal equipment of the vehicles, aircraft or vessels and are normally sold with them.
-
The provisions of general rule of interpretation 2(a) are also applicable, at the request of the declarant and subject to conditions stipulated by the Customs authorities, to goods of heading 8608, 8805, 8905 and 8907 imported in split consignments.
General Rules for the Interpretation of goods
Classification of goods in the Tariff shall be governed by the following principles:
Rule 1
The titles of sections, chapters and sub-chapters are provided for ease of reference only. For legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes and, provided such headings or notes do not otherwise require, according to the following provisions.
Rule 2
- Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as presented, the incomplete or unfinished article has the essential character of the complete or finished article. It shall also be taken to include a reference to that article complete or finished (or falling to be classified as complete or finished by virtue of this rule), presented unassembled or disassembled.
- Any reference in a heading to a material or substance shall be taken to include a reference to mixtures or combinations of that material or substance with other materials or substances. Any reference to goods of a given material or substance shall be taken to include a reference to goods consisting wholly or partly of such material or substance. The classification of goods consisting of more than one material or substance shall be according to the principles of rule 3.
Rule 3
When, by application of rule 2(b) or for any other reason, goods are prima facie classifiable under two or more headings, classification shall be effected as follows:
- the heading which provides the most specific description shall be preferred to headings providing a more general description. However, when two or more headings each refer to part only of the materials or substances contained in mixed or composite goods or to part only of the items in a set put up for retail sale, those headings are to be regarded as equally specific in relation to those goods, even if one of them gives a more complete or precise description of the goods;
- mixtures, composite goods consisting of different materials or made up of different components, and goods put up in sets for retail sale, which cannot be classified by reference to 3(a), shall be classified as if they consisted of the material or component which gives them their essential character, insofar as this criterion is applicable;
- when goods cannot be classified by reference to 3(a) or (b), they shall be classified under the heading which occurs last in numerical order among those which equally merit consideration.
Goods which cannot be classified in accordance with the above rules shall be classified under the heading appropriate to the goods to which they are most akin.
Rule 5
In addition to the foregoing provisions, the following rules shall apply in respect of the goods referred to therein:
- camera cases, musical instrument cases, gun cases, drawing-instrument cases, necklace cases and similar containers, specially shaped or fitted to contain a specific article or set of articles, suitable for long-term use and presented with the articles for which they are intended, shall be classified with such articles when of a kind normally sold therewith. This rule does not, however, apply to containers which give the whole its essential character;
- subject to the provisions of rule 5(a), packing materials and packing containers ( 1 ) presented with the goods therein shall be classified with the goods if they are of a kind normally used for packing such goods. However, this provision is not binding when such packing materials or packing containers are clearly suitable for repetitive use.
Rule 6
For legal purposes, the classification of goods in the subheadings of a heading shall be determined according to the terms of those subheadings and any related subheading notes and, mutatis mutandis, to the above rules, on the understanding that only subheadings at the same level are comparable. For the purposes of this rule, the relative section and chapter notes also apply, unless the context requires otherwise.
Last updated: 19 April 2024 View latest amendments