UK Integrated Online Tariff Switch to the Northern Ireland Online Tariff

Commodity 7326909810
Copy commodity code
Code copied

Commodity
7326909810
Classification
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
Commodity valid from
1 January 2004
Supplementary unit

There are no supplementary unit measures assigned to this commodity

What are supplementary units?
Supplementary units are used when an additional measurement unit is needed on customs declarations. For example: the quantity of the products as well as the weight in kilograms.
Date of trade
25 April 2024
Change
Filter by country
All countries
Change
Reset to all countries

Importing into the UK

Import controls

Country Measure type Conditions Legal base Footnotes
All countries (1011) Import prohibition on goods for torture and repression Conditions Footnotes
Belarus (BY) Restriction on entry into free circulation Conditions SN031
Iran (IR) Import control on restricted goods and technologies Conditions
Libya (LY) Import control on restricted goods and technologies Conditions
North Korea (KP) Import prohibition
North Korea (KP) Import control on restricted goods and technologies Conditions
Russia (RU) Restriction on entry into free circulation Conditions Footnotes
Russia (RU) Import control on restricted goods and technologies Conditions
Syria (SY) Restriction on entry into free circulation
Ukraine (UA) Restriction on entry into free circulation Conditions SN008

Import duties

The table below lists the import duties that apply to the import of commodity 7326909810.

Use our tariff duty calculator to work out the duties and taxes applicable to the import of commodity 7326 9098 10.

Click on a measure type to find out more about the measure and the preference code to be used on declarations.

Country Measure type Duty rate Conditions Legal base Footnotes
All countries (1011) Third country duty 2.00%
Channel Islands (1080) UK-CD Customs Union n/a
CARIFORUM (1033) Tariff preference 0.00%
Central America (2200) Tariff preference 0.00%
Developing Countries Trading Scheme (DCTS) - Comprehensive Preferences (1062) Tariff preference 0.00% Conditions
Developing Countries Trading Scheme (DCTS) - Enhanced Preferences (1061) Tariff preference 0.00% Conditions
Developing Countries Trading Scheme (DCTS) - Standard Preferences (1060)
excluding India
Tariff preference 0.00% Conditions
Eastern and Southern Africa States (1034)
excluding Comoros, Madagascar
Tariff preference 0.00%
European Union (1013) Tariff preference 0.00%
OCTs (Overseas Countries and Territories) (2080) Tariff preference 0.00%
SADC EPA (1035) Tariff preference 0.00%
Albania (AL) Tariff preference 0.00%
Andorra (AD) Tariff preference 0.00%
Australia (AU) Tariff preference 0.00% Conditions
Cameroon (CM) Tariff preference 0.00%
Canada (CA) Tariff preference 0.00%
Ceuta (XC) Tariff preference 0.00%
Chile (CL) Tariff preference 0.00%
Colombia (CO) Tariff preference 0.00%
Ecuador (EC) Tariff preference 0.00%
Egypt (EG) Tariff preference 0.00%
Faroe Islands (FO) Tariff preference 0.00%
Fiji (FJ) Tariff preference 0.00%
Georgia (GE) Tariff preference 0.00%
Ghana (GH) Tariff preference 0.00%
Iceland (IS) Tariff preference 0.00%
Israel (IL) Tariff preference 0.00%
Ivory Coast (CI) Tariff preference 0.00%
Jordan (JO) Tariff preference 0.00%
Kenya (KE) Tariff preference 0.00%
Kosovo (XK) Tariff preference 0.00%
Lebanon (LB) Tariff preference 0.00%
Liechtenstein (LI) Tariff preference 0.00%
Melilla (XL) Tariff preference 0.00%
Mexico (MX) Tariff preference 0.00%
Moldova (MD) Tariff preference 0.00%
Morocco (MA) Tariff preference 0.00%
New Zealand (NZ) Tariff preference 0.00% Conditions
North Macedonia (MK) Tariff preference 0.00%
Norway (NO) Tariff preference 0.00%
Occupied Palestinian Territories (PS) Tariff preference 0.00%
Papua New Guinea (PG) Tariff preference 0.00%
Peru (PE) Tariff preference 0.00%
Samoa (WS) Tariff preference 0.00%
San Marino (SM) Tariff preference 0.00%
Serbia (XS) Tariff preference 0.00%
Singapore (SG) Tariff preference 0.00%
Solomon Islands (SB) Tariff preference 0.00%
South Africa (ZA) Tariff preference 0.00%
South Korea (KR) Tariff preference 0.00%
Switzerland (CH) Tariff preference 0.00%
Tunisia (TN) Tariff preference 0.00%
Turkey (TR) Tariff preference 0.00%
Ukraine (UA) Tariff preference 0.00%
Vietnam (VN) Tariff preference 0.00%

Trade remedies, safeguards and retaliatory duties

Country Measure type Duty rate Conditions Legal base Footnotes
Belarus (BY) Additional duties 35.00% Conditions SN007
Russia (RU) Additional duties 35.00% Conditions SN007

Suspensions

Country Measure type Duty rate Conditions Legal base Footnotes
All countries (1011) Autonomous suspension under authorised use 0.00% Conditions Footnotes
All countries (1011) Airworthiness tariff suspension 0.00% Conditions CD333

Import VAT and excise

  • Goods are subject to an import VAT rate of 20.00%
  • Excise duties are not chargeable on this commodity.
Country Measure type Duty rate Conditions Legal base Footnotes
All countries (1011) Value added tax Standard rate 20.00% 03020

Exporting from the UK

The commodity code for exporting and Intrastat reporting is 7326 9098.

UK export controls

Country Measure type Duty rate Conditions Legal base Footnotes
All countries (1011) Export control Conditions EX001
All third countries (1008) Goods for torture and repression, export restriction Conditions EX003
All third countries (1008) Export authorization (Dual use) Conditions EX005
Iran (IR) Export control on restricted goods and technologies Conditions EX010
North Korea (KP) Export control on restricted goods and technologies Conditions EX008
Russia (RU) Export control on restricted goods and technologies Conditions EX012
Russia (RU) Export control Conditions SN028
Syria (SY) Export control on restricted goods and technologies Conditions EX013
Ukraine (UA) Export control Conditions SN029

Check duties and customs procedures for exporting goods

Find information about how to move goods from the UK to the rest of the world.

Use this service to check:

  • rules and restrictions
  • tax and duty rates
  • what exporting documents you need

This service is only available in the UK due to licencing restrictions;

Check how to export commodity goods (link opens in new tab)

Preferential rules of origin

To view rules of origin, select a country with which the UK has a trade agreement from the list above.

Find out more about preferential rules of origin:

Non-preferential rules of origin

The Customs (Origin of Chargeable Goods) (EU Exit) Regulations 2020 (opens in new tab)

Non-preferential rules of origin allows the implementation of several commercial policy measures such as:

  • anti-dumping duties
  • countervailing duties
  • trade embargoes
  • safeguarding measures
  • quantitative restrictions
  • tariff quotas

They are also used for trade statistics, public tenders and origin marking.

Notes for commodity 7326909810

Chapter notes

  1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1(d) to Chapter 72.

  2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16mm.

Section notes

  1. This section does not cover:

    a. prepared paints, inks or other products with a basis of metallic flakes or powder (heading 3207 to 3210, 3212, 3213 or 3215);

    b. ferro-cerium or other pyrophoric alloys (heading 3606);

    c. headgear or parts thereof of heading 6506 or 6507;

    d. umbrella frames or other articles of heading 6603;

    e. goods of Chapter 71 (for example, precious-metal alloys, base metal clad with precious metal, imitation jewellery);

    f. articles of Section XVI (machinery, mechanical appliances and electrical goods);

    g. assembled railway or tramway track (heading 8608) or other articles of Section XVII (vehicles, ships and boats, aircraft);

    h. instruments or apparatus of Section XVIII, including clock or watch springs;

    ij. lead shot prepared for ammunition (heading 9306) or other articles of Section XIX (arms and ammunition);

    k. articles of Chapter 94 (for example, furniture, mattress supports, luminaires and lighting fittings, illuminated signs, prefabricated buildings);

    l. articles of Chapter 95 (for example, toys, games, sports requisites);

    m. hand sieves, buttons, pens, pencil-holders, pen nibs, monopods, bipods, tripods and similar articles or other articles of Chapter 96 (miscellaneous manufactured articles); or

    n. articles of Chapter 97 (for example, works of art).

  2. Throughout the classification, the expression ‘parts of general use’ means:

    a. articles of heading 7307, 7312, 7315, 7317 or 7318 and similar articles of other base metal, other than articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences (heading 9021)

    b. springs and leaves for springs, of base metal, other than clock or watch springs (heading 9114); and

    c. articles of heading 8301, 8302, 8308, 8310 and frames and mirrors, of base metal, of heading 8306.

    In Chapters 73 to 76 and 78 to 82 (but not in heading 7315), references to parts of goods do not include references to parts of general use as defined above.

    Subject to the preceding paragraph and to note 1 to Chapter 83, the articles of Chapter 82 or 83 are excluded from Chapters 72 to 76 and 78 to 81.

  3. Throughout the classification, the expression ‘base metals’ means: iron and steel, copper, nickel, aluminium, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium.

  4. Throughout the classification, the term ‘cermets’ means products containing a microscopic heterogeneous combination of a metallic component and a ceramic component. The term ‘cermets’ includes sintered metal carbides (metal carbides sintered with a metal).

  5. Classification of alloys (other than ferro-alloys and master alloys as defined in Chapters 72 and 74):

    a. An alloy of base metals is to be classified as an alloy of the metal which predominates by weight over each of the other metals.

    b. An alloy composed of base metals of this section and of elements not falling within this section is to be treated as an alloy of base metals of this section if the total weight of such metals equals or exceeds the total weight of the other elements present.

    c. In this section, the term ‘alloys’ includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds.

  6. Unless the context otherwise requires, any reference in the classification to a base metal includes a reference to alloys which, by virtue of note 5 above, are to be classified as alloys of that metal.

  7. Classification of composite articles:

    Except where the headings otherwise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the General Interpretative rules) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals.

    For this purpose:

    a. Iron and steel, or different kinds of iron or steel, are regarded as one and the same metal.

    b. An alloy is regarded as being entirely composed of that metal as an alloy of which, by virtue of note 5, it is classified.

    c. A cermet of heading 8113 is regarded as a single base metal.

  8. In this section, the following expressions have the meanings hereby assigned to them:

    a. Waste and scrap

    All metal waste and scrap, and metal goods definitely not usable as such because of breakage, cutting-up, wear or other reasons.

    b. Powders

    Products of which 90% or more by weight passes through a sieve having a mesh aperture of 1mm.

  9. For the purposes of Chapters 74 to 76 and 78 to 81, the following expressions have the meanings hereby assigned to them :

    (a) Bars and rods

    Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

    Wire-bars and billets of Chapter 74 with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading 7403. This provision applies mutatis mutandis to the products of Chapter 81.

    (b) Profiles

    Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

    (c) Wire

    Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of the width.

    (d) Plates, sheets, strip and foil

    Flat-surfaced products (other than the unwrought products), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are :

    • of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;

    • of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

    Headings for plates, sheets, strip, and foil apply, inter alia, to plates, sheets, strip, and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

    (e) Tubes and pipes

    Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness.

    Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings

General Rules for the Interpretation of goods

Classification of goods in the Tariff shall be governed by the following principles:

Rule 1

The titles of sections, chapters and sub-chapters are provided for ease of reference only. For legal purposes, classification shall be determined according to the terms of the headings and any relative section or chapter notes and, provided such headings or notes do not otherwise require, according to the following provisions.

Rule 2

  1. Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as presented, the incomplete or unfinished article has the essential character of the complete or finished article. It shall also be taken to include a reference to that article complete or finished (or falling to be classified as complete or finished by virtue of this rule), presented unassembled or disassembled.
  2. Any reference in a heading to a material or substance shall be taken to include a reference to mixtures or combinations of that material or substance with other materials or substances. Any reference to goods of a given material or substance shall be taken to include a reference to goods consisting wholly or partly of such material or substance. The classification of goods consisting of more than one material or substance shall be according to the principles of rule 3.

Rule 3

When, by application of rule 2(b) or for any other reason, goods are prima facie classifiable under two or more headings, classification shall be effected as follows:

  1. the heading which provides the most specific description shall be preferred to headings providing a more general description. However, when two or more headings each refer to part only of the materials or substances contained in mixed or composite goods or to part only of the items in a set put up for retail sale, those headings are to be regarded as equally specific in relation to those goods, even if one of them gives a more complete or precise description of the goods;
  2. mixtures, composite goods consisting of different materials or made up of different components, and goods put up in sets for retail sale, which cannot be classified by reference to 3(a), shall be classified as if they consisted of the material or component which gives them their essential character, insofar as this criterion is applicable;
  3. when goods cannot be classified by reference to 3(a) or (b), they shall be classified under the heading which occurs last in numerical order among those which equally merit consideration.
Rule 4

Goods which cannot be classified in accordance with the above rules shall be classified under the heading appropriate to the goods to which they are most akin.

Rule 5

In addition to the foregoing provisions, the following rules shall apply in respect of the goods referred to therein:

  1. camera cases, musical instrument cases, gun cases, drawing-instrument cases, necklace cases and similar containers, specially shaped or fitted to contain a specific article or set of articles, suitable for long-term use and presented with the articles for which they are intended, shall be classified with such articles when of a kind normally sold therewith. This rule does not, however, apply to containers which give the whole its essential character;
  2. subject to the provisions of rule 5(a), packing materials and packing containers ( 1 ) presented with the goods therein shall be classified with the goods if they are of a kind normally used for packing such goods. However, this provision is not binding when such packing materials or packing containers are clearly suitable for repetitive use.

Rule 6

For legal purposes, the classification of goods in the subheadings of a heading shall be determined according to the terms of those subheadings and any related subheading notes and, mutatis mutandis, to the above rules, on the understanding that only subheadings at the same level are comparable. For the purposes of this rule, the relative section and chapter notes also apply, unless the context requires otherwise.

Code Description
TN057 Certain Russian iron and steel products that have been processed in a third country are prohibited from import into the UK from 30th September 2023 as set out in the Russia (Sanctions) (EU Exit) (Amendment) Regulations in April 2023.

There will be no exceptions or transitional period for any goods falling under the prohibition. Please find full guidance here:

Sanctions Guidance
TN207 The export of arms and WMD-related items; Aviation fuels; Condensates and natural gas liquid; Crude oil; Helicopters and vessels; Industrial machinery, vehicles, iron, steel and other metals; luxury goods; Refined petroleum products; gold and precious metals or diamonds to the Democratic People's Republic of Korea is controlled (as well as related activities). Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.
TN209 The export of nuclear and missile list items; graphite and relevant metals and other restricted goods to or for use in Iran may be controlled (as well as related activities). Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.
TN701 According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9) it shall be prohibited to import into European Union goods originating in Crimea or Sevastopol.
The prohibition shall not apply in respect of:
(a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts, provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competent authority of the Member State in which they are established.
(b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, for which compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No 978/2012 and Regulation (EU) No 374/2014 or in accordance with the EU-Ukraine Association Agreement.
TN702 According to the Council Regulation (EU) No 1351/2014 (OJ L365, p. 46), the export of goods and technologies suited for use in the sectors of transport; telecommunications; energy; prospection, exploatation and production of oil, gas and mineral resources is prohibited:
(a) to any natural or legal person, entity or body in Crimea or Sevastopol, or
(b) for use in Crimea or Sevastopol.
The prohibitions shall be without prejudice to the execution until 21 March 2015 of an obligation arising from a contract concluded before 20 December 2014, or by ancillary contracts necessary for the execution of such contracts, provided that the competent authority has been informed at least five working days in advance.
When related to the use in Crimea or Sevastopol, the prohibitions do not apply where there are no reasonable grounds to determine that the goods and technology or the services are to be used in Crimea or Sevastopol.

Autonomous suspension under authorised use for All countries

From 1 Jan 2021

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
N990

EUS - Authorisation for the use of end use procedure (Column 8c, Annex A of Delegated Regulation (EU) 2015/2446)

Apply the mentioned duty

No document provided

Declared subheading not allowed
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
N990
  • Provide the authorisation decision number for the end use authorisation in the format:

  • 2 digit code identifying the member state of authorisation, e.g. GB.

  • 3-digit code indicating that an end use authorisation is held, i.e. EUS (Authorisation code)

  • followed by the authorisation reference number.

  • For status code XW: Enter text ‘Waiver claimed’ in the document reason field.

  • No document status code is required.

Autonomous suspension under authorised use for All countries

Code Description
EU001 Suspension of duties is subject to Authorised-Use customs supervision in accordance with Chapter 4 of The Customs (Special Procedures and Outward Processing) (EU Exit) Regulations 2018 (UK Statutory Instruments 2018 No. 1249)
EU002 For the construction, maintenance and repair of aircraft of an unladen weight exceeding 2 000 kilograms and of ground flying trainers for civil use.

Airworthiness tariff suspension for All countries

From 1 Jan 2021

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
C119

Authorised Release Certificate — EASA Form 1 (Appendix I to Annex I to Regulation (EU) No 748/2012), or equivalent certificate

Apply the mentioned duty

No document provided

Measure not applicable
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
C119
  • Enter the reference number of the Authorised Release Certificate, formerly referred to as Certificate of airworthiness or equivalent certificate.

  • Where a sequentially numbered range of certificates covers the goods, enter the lowest to the highest reference numbers of the certificates concerned i.e. document code + 0054037-0054047: status code.

  • Where certificates are not sequentially numbered, enter the reference number of each certificate concerned.

  • Faxed copy not acceptable.

  • Use one of the following document status codes: AE, GE

Airworthiness tariff suspension for All countries

Code Description
CD333 The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended.
In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate.
The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.

Value added tax for All countries

Code Description
03020 UK VAT standard rate

Import prohibition on goods for torture and repression for All countries

From 1 Feb 2024

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
C064

Authorisation for export or import of goods that could be used for torture (Regulation (EU) 2019/125). as retained in UK law.

Import/export allowed after control
Y904

Goods other than those described in the TR footnotes linked to the measure

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
C064
  • For status codes: AC, AE, AF, AP, AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, XX: Enter the reference number of the authorisation for export or import of goods that could be used for torture.

  • Where a sequentially numbered range of certificates covers the goods, enter the lowest to the highest reference numbers of the certificates concerned i.e. document code + 0054037-0054047: status code.

  • Where certificates are not sequentially numbered, enter the reference number of each certificate concerned.

  • For status code XW: Enter text ‘Waiver claimed’ in the document reason field.

  • For status code XX: In addition to completing the Document ID field, enter text ‘Exempt’ in the document reason field.

  • Use one of the following document status codes: AC, AE, AF, AP, AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, XW, XX

Y904
  • Complete the statement ‘Not in TR footnote list’.

  • Use of this code constitutes a legal declaration that the goods are not in the list of goods included in the footnote Commission Implementing Regulation (EU) No 775/2014.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

Import prohibition on goods for torture and repression for All countries

Code Description
CD990 If the declared goods are described in the "TR" footnotes linked to the measure and they are not medical technical goods and they won't be used for the exclusive purpose of public display in a museum in view of their historic significance,export/import is prohibited (Regulation (EU) 2019/125 (OJ L 30), as retained in UK law.
TR016 Thumb-cuffs, finger-cuffs, thumbscrews and finger-screws. This item includes both serrated and non-serrated cuffs and screws
TR017 Bar fetters, weighted leg restraints and gang chains comprising bar fetters or weighted leg restraints.
1. Bar fetters are shackles or ankle rings fitted with a locking mechanism, linked by a rigid bar which is typically made of metal
2. This item includes bar fetters and weighted leg restraints which are linked to ordinary handcuffs by means of a chain
TR018 Cuffs for restraining human beings, designed to be anchored to a wall, floor or ceiling
TR023 Shields with metal spikes

Developing Countries Trading Scheme (DCTS) - Standard and Enhanced Preferences

Declaring your proof of origin

CDS Data Element (DE) What you must include
DE 2/3

You must include one of the following document codes, as appropriate:

  • 9001 (origin declaration)

  • N865 (Form A)

DE 4/17

The data element must include a preference code in the 200 series.

Developing Countries Trading Scheme (DCTS) - Standard and Enhanced Preferences

Declaring your proof of origin

CDS Data Element (DE) What you must include
DE 2/3

You must include one of the following document codes, as appropriate:

  • 9001 (origin declaration)

  • N865 (Form A)

DE 4/17

The data element must include a preference code in the 200 series.

Developing Countries Trading Scheme (DCTS) - Comprehensive Preferences

Declaring your proof of origin

CDS Data Element (DE) What you must include
DE 2/3

You must include one of the following document codes, as appropriate:

  • 9001 (origin declaration)

  • N865 (Form A)

DE 4/17

The data element must include a preference code in the 200 series.

Free Trade Agreement between the United Kingdom of Great Britain and Northern Ireland and Australia

Declaring your proof of origin

CDS Data Element (DE) What you must include
DE 2/3

You must include one of the following document codes, as appropriate:

  • U110 - if the claim is based on a ‘declaration of origin’ for a single shipment

  • U111 - if the claim is based on a ‘declaration of origin’ for multiple shipments of identical products to cover a 12-month period

  • U112 - if the claim is based on importers knowledge, using status code JP

Codes U110 and U111 must be declared with one of the following document status codes (opens in new window): AE, AF, AG, AP, AS, AT, GE, GP, HP, JE, JP, LE, LP, UA, UE, UP, US, XB.

DE 4/17

The data element must include a preference code in the 300 series.

DE 5/16

The data element must be completed with the country of preferential origin.

Restriction on entry into free circulation for Belarus

From 5 Jul 2022

Meet the following condition and supply the relevant document code(s) on your declaration.

Document code Requirement Action
9024

Goods related to the execution of obligations arising from contracts concluded before 05 July 2022, provided the actions carried out under these contracts are completed by 30 August 2022 and an import licence is supplied

Import allowed
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
9024
  • Enter GBSAN followed by the reference number of the licence.

  • If using more than one licence, then a separate 9024 entry in DE 2/3 is required for each licence.

  • As a temporary measure for CDS, a print of the electronic licence must be uploaded for manual validation and decrementing.

  • Once CDS electronic licence functionality is updated for 9024, the status codes will be amended to the E series appropriate to electronic licences.

  • Use one of the following document status codes: AC, AE, AF, AG, AP, AS, AT, FP, GE, GP, JE, JS

Restriction on entry into free circulation for Belarus

Code Description
SN031 The import of these goods are prohibited under the Republic of Belarus (Sanctions) (EU Exit) Regulations 2019, (as amended on 05 July 2022). Imports are allowed for goods imported in relation to the execution of obligations arising from contracts or related ancillary contracts, signed prior to 05 July 2022 and under the authority of an import licence. Please refer to the Statutory Guidance for further information.

Additional duties for Belarus

From 25 Mar 2022

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
9008

Goods of Belarusian or Russian origin exported from any country before 25th March 2022

Measure not applicable

No document provided

Apply the mentioned duty
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
9008
  • Complete the statement -

  • Goods exported from Russia: ‘Exported from Russia pre 25032022’.

  • Goods exported from Belarus: ‘Exported from Belarus pre 25032022’.

  • Use of this code constitutes a legal declaration that the product has been exported from Russia or Belarus to the UK prior to 25.03.2022.

  • Sufficient evidence must be held to demonstrate eligibility for this exemption which must be produced on demand.

  • No document status code is required.

Additional duties for Belarus

Code Description
SN007 Goods of Russian or Belarusian origin that were exported out of Russia and Belarus before 25th March 2022 are exempt from these additional duties and document code 9008 should be used. You may need to provide commercial evidence to HMRC when using this Document Code.

Import control on restricted goods and technologies for Iran

From 1 Jan 2021

Meet the following condition and supply the relevant document code(s) on your declaration.

Document code Requirement Action
Y966

Goods other than those described in the MG footnotes linked to the measure (Missile Technology Control Regime list - Annex III of Reg. (EU) 267/2012)

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
Y966
  • Complete the statement ‘regulation 267/2012 exempt’.

  • Use of this code constitutes a legal declaration that the goods are not those described in the MG footnotes linked to the measure (Missile Technology Control Regime list - Annex III of Regulation (EU) 267/2012).

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

Import control on restricted goods and technologies for North Korea

From 1 Jan 2021

Meet the following condition and supply the relevant document code(s) on your declaration.

Document code Requirement Action
Y920

Goods other than those described in the footnotes linked to the measure

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
Y920
  • Complete the statement ‘Not covered by footnote’.

  • Use of this code constitutes a legal declaration that the goods are not those described in the footnotes linked to the measure.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

Import control on restricted goods and technologies for Libya

From 1 Jan 2021

Meet the following condition and supply the relevant document code(s) on your declaration.

Document code Requirement Action
Y920

Goods other than those described in the footnotes linked to the measure

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
Y920
  • Complete the statement ‘Not covered by footnote’.

  • Use of this code constitutes a legal declaration that the goods are not those described in the footnotes linked to the measure.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

Free Trade Agreement between the United Kingdom of Great Britain and Northern Ireland and New Zealand

Declaring your proof of origin

CDS Data Element (DE) What you must include
DE 2/3

You must include one of the following document codes, as appropriate:

  • U110 - if the claim is based on a ‘declaration of origin’ for a single shipment

  • U111 - if the claim is based on a ‘declaration of origin’ for multiple shipments of identical products to cover a 12-month period

  • U112 - if the claim is based on importers knowledge, using status code JP

Codes U110 and U111 must be declared with one of the following document status codes (opens in new window): AE, AF, AG, AP, AS, AT, GE, GP, HP, JE, JP, LE, LP, UA, UE, UP, US, XB.

DE 4/17

The data element must include a preference code in the 300 series.

DE 5/16

The data element must be completed with the country of preferential origin.

Restriction on entry into free circulation for Russia

From 11 Dec 2023

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
9011

Goods subject to sanction with a DIT import or export licence

Import allowed
9022

Goods not subject to sanctions.

Import allowed
9038

Goods exported from Russia prior to 21st April 2023 that arrive in the UK before 21st May 2023.

Import allowed
9063

Goods falling under the General Trade Licence GBSAN0001

Import allowed
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
9011
  • Enter GBSAN followed by the reference number of the licence.

  • If using more than one licence, then a separate 9011 entry in DE 2/3 is required for each licence.

  • Status code AC should only be used as a fallback for when electronic licence functionality is inoperable.

  • Use one of the following document status codes: AC, EA, EE, EL, EP, ES

9022
  • Complete the statement ‘Not subject to sanctions’.

  • Use of this code constitutes a legal declaration that the goods are exempt from sanctions.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

9038
  • Complete the statement ‘Exempt from sanctions’.

  • Use of this code constitutes a legal declaration that the goods are exempt from sanctions on the basis that they had been exported from Russia prior to 21st April 2023 and arrived in the UK before 21st May 2023.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

9063
  • Enter ‘GBSAN0001’

  • Note: The Sanctions General Import Licence is available for use by any importer but evidence must be available on request to demonstrate compliance with the terms of the licence.

  • Use one of the following document status codes: IA, IP

Restriction on entry into free circulation for Russia

Code Description
SN123 Goods of Russian origin falling under this commodity code are prohibited from import into the UK.
Please consult Russia sanctions guidance for a link to the sanctions legislation and up to date advice on the sanctions and any exemptions and conditions that may apply to your goods.
A licence may be granted for the import into the UK of goods falling under this commodity code if it relates to the execution of obligations arising from contracts concluded before 21 April 2023.
For goods exported from Russia prior to 21st April 2023 that arrive in the UK before 21st May 2023, please declare document code 9038.
For other exceptions, please declare document code 9022.
SN124 Iron and steel products (listed in Schedule 3B) of Russian origin that have been processed in a third country may be imported into the UK prior to 30th September 2023.
In this instance, please declare document code 9022.
You may need to provide commercial evidence to HMRC when using this Document Code.
To find out whether your goods are affected, please consult Russia sanctions guidance
SN134 The General Trade Licence for sanctioned iron and steel permits the import of certain prohibited goods that:

are used as reuseable packaging - falling under CN 7326904000 (pallets and similar platforms for handling goods); is imported into the United Kingdom for the purpose of facilitating the international trade of other goods, whether or not filled with other goods when imported; and is not consigned from Russia; or

is a relevant third country processed iron or steel product; was manufactured or produced before 23 June 2023; and beginning with 23 June 2023, has not been located in Russia at any time; or

is a relevant third country processed iron or steel product; has previously been in free circulation in the United Kingdom; falls within the same commodity code as it did when it was exported from the United Kingdom; and beginning with 21 April 2023, has not been located in Russia at any time.

Alongside their import, the licence permits certain services and actions related to their import. It may also be used in cases where a trader is unaware of a good's origin, such that their goods are potentially prohibited. The licence also has a record-keeping requirement. Traders importing goods under this licence are not required to demonstrate evidence of a good's supply chain, but may be requested to present other types of documentary evidence.

Please refer to the guidance for further information.

Use of this licence entails a customs declaration. This Licence's document code is 9063 and licence number is GBSAN0001.

Additional duties for Russia

From 25 Mar 2022

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
9008

Goods of Belarusian or Russian origin exported from any country before 25th March 2022

Measure not applicable

No document provided

Apply the mentioned duty
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
9008
  • Complete the statement -

  • Goods exported from Russia: ‘Exported from Russia pre 25032022’.

  • Goods exported from Belarus: ‘Exported from Belarus pre 25032022’.

  • Use of this code constitutes a legal declaration that the product has been exported from Russia or Belarus to the UK prior to 25.03.2022.

  • Sufficient evidence must be held to demonstrate eligibility for this exemption which must be produced on demand.

  • No document status code is required.

Additional duties for Russia

Code Description
SN007 Goods of Russian or Belarusian origin that were exported out of Russia and Belarus before 25th March 2022 are exempt from these additional duties and document code 9008 should be used. You may need to provide commercial evidence to HMRC when using this Document Code.

Import control on restricted goods and technologies for Russia

From 1 Jan 2021

Meet the following condition and supply the relevant document code(s) on your declaration.

Document code Requirement Action
Y920

Goods other than those described in the footnotes linked to the measure

Import allowed
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
Y920
  • Complete the statement ‘Not covered by footnote’.

  • Use of this code constitutes a legal declaration that the goods are not those described in the footnotes linked to the measure.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

Restriction on entry into free circulation for Ukraine

From 30 Mar 2022

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
9009

Goods originating in non-government controlled Ukrainian territory with a certificate of origin issued by the Ukrainian authorities

Import/export allowed after control
9010

Goods originating specifically in the non-government controlled areas of Donetsk and Luhansk oblasts if related to an obligation arising from a contract concluded before 23 February 2022 subject to these contracts, or ancillary contracts necessary for their execution, being concluded by 24 August 2022, and the Secretary of State for the Department for International Trade being informed at least ten working days in advance of the import

Import/export allowed after control
9017

Goods exported from an area of Ukraine under the control of the Ukrainian government

Import allowed
Guidance for completing CDS Data Element 2/3
Document code CDS guidance
9009
  • Complete the statement ‘Exempt from prohibition’.

  • Use of this code constitutes a legal declaration that the goods originating in non-government controlled Ukrainian territory are covered by a certificate of origin issued by the Ukrainian authorities and entitled to an exemption from the prohibition on the import of goods originating in the non-government controlled areas of Ukraine.

  • Sufficient evidence must be held in records to demonstrate eligibility for this exemption, which must be produced on demand.

  • No document status code is required.

9010
  • Complete the statement ‘Contractual exemption’.

  • Use of this code constitutes a legal declaration that the goods are entitled to an exemption from the prohibition imposed on goods originating in the non-government controlled areas of Donetsk and Luhansk oblasts on the basis that they relate to an obligation arising from a contract concluded before 23 February 2022 and subject to these contracts, or ancillary contracts necessary for their execution, being concluded by 24 August 2022.

  • It is further a legal declaration that the Secretary of State for the Department for Business and Trade was informed at least ten working days in advance of this exception being used.

  • Sufficient evidence must be held in records to demonstrate eligibility for this exception, which must be produced on demand.

  • No document status code is required.

9017
  • Complete the statement ‘From Government Controlled Area’.

  • Use of this code constitutes a legal declaration that the goods were exported from an area of Ukraine which was under the control of the Ukrainian government at the time of export.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

Restriction on entry into free circulation for Ukraine

Code Description
SN008

The import of goods originating in non-government controlled Ukrainian territory is prohibited under the Russia (Sanctions) (EU Exit) Regulations 2019 (as amended on 30 March 2022). Exceptions apply for:

  • goods that originated in non-government controlled Ukrainian territory are satisfactorily certified by or on behalf of the Government of Ukraine as originating in Ukraine.
  • goods originating specifically in non-government controlled areas of Donetsk and Luhansk oblasts and related to an obligation arising from a contract concluded before 23 February 2022. For this exception to apply, these contracts, or ancillary contracts necessary for their execution, should be concluded by 24 August 2022. The Secretary of State for the Department for International Trade should also be informed at least ten working days in advance of this exception being used.

Please refer to the Statutory Guidance for further information.

Export authorization (Dual use) for All third countries

From 29 Jan 2022 to 31 Jan 2025

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
X002

Dual use export authorisation (Regulation 428/2009 and its amendments).

Import/export allowed after control
Y999

Goods for which an export licence is not required. Please use the Goods Checker to determine whether your items are controlled and whether you need an export licence from the Export Control Joint Unit.

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance CHIEF guidance
X002
  • Enter the nationality of the document (for UK use GB; for Union docs use EU) followed by:

  • For an Open General Export Licence enter OGE followed by the licence number.

  • For a Union General Export authorisation enter GEA followed by the reference number of the general authorisation document.

  • For Open Individual Export Licence enter OIE followed by the licence number.

  • -For Standard Individual Export Licences enter SIE followed by the licence number.

  • If using more than one licence, then a separate X002 entry in DE 2/3 is required for each licence.

  • Use one of the following document status codes: AC, AE, AF, AP, AT, EA, EE, EP, ES, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, XW, XX

  • With the exception of AG, AS, EL, IE, IS, JE, JS, UE, UP, US, XB, XF, XU, enter appropriate status code listed in document status codes for harmonised declarations.

  • For supplementary declarations, use EA, IA, JA or UA as appropriate.

Y999
  • Complete the statement ‘CDS Waiver’.

  • Use of this code constitutes a legal declaration that the goods do not require the certificate or licence shown.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

This document code is available on CDS only.

Customs Declaration Service (CDS) Licence Waiver

The use of 999L allows a CDS waiver code to be declared for prohibited and restricted goods, allowing declarants to confirm that the goods are not subject to specific licencing measures. You must enter ‘CDS Waiver’ in the additional documentation field for this commodity item.

This waiver cannot be used for goods that are imported/exported or moved to/from Northern Ireland.

Export authorization (Dual use) for All third countries

Code Description
EX005 The export of these items may be controlled under Retained Council Regulation (EC) No. 428/2009. Please refer to the Goods Checker to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

Goods for torture and repression, export restriction for All third countries

From 29 Jan 2022 to 31 Jan 2025

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
9106

Authorisation for torture goods

Import/export allowed after control
Y999

Goods for which an export licence is not required. Please use the Goods Checker to determine whether your items are controlled and whether you need an export licence from the Export Control Joint Unit.

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance CHIEF guidance
9106
  • Enter GBSIE followed by the licence number.

  • If using more than one licence, then a separate 9106 entry in DE 2/3 is required for each licence.

  • For supplementary declarations, use EA, IA, JA, or UA as appropriate.

  • Use one of the following document status codes: AC, AE, AF, AP, AT, EA, EE, EP, ES, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, XA, XW, XX

  • With the exception of AG, AS, EL, IE, IS, JE, JS, UE, UP, US, XB, XF, XU, enter appropriate status code listed in document status codes for harmonised declarations.

  • For supplementary declarations, use EA, IA, JA or UA as appropriate.

Y999
  • Complete the statement ‘CDS Waiver’.

  • Use of this code constitutes a legal declaration that the goods do not require the certificate or licence shown.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

This document code is available on CDS only.

Customs Declaration Service (CDS) Licence Waiver

The use of 999L allows a CDS waiver code to be declared for prohibited and restricted goods, allowing declarants to confirm that the goods are not subject to specific licencing measures. You must enter ‘CDS Waiver’ in the additional documentation field for this commodity item.

This waiver cannot be used for goods that are imported/exported or moved to/from Northern Ireland.

Goods for torture and repression, export restriction for All third countries

Code Description
EX003 The export of these items may be controlled under Retained Regulation (EU) 2019/125. Please refer to the Goods Checker to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

Export control for All countries

From 1 Oct 2023 to 31 Jan 2025

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
9104

Standard individual Export Licence: military goods and dual use goods subject to UK export controls.

Export allowed
Y999

Goods for which an export licence is not required. Please use the Goods Checker to determine whether your items are controlled and whether you need an export licence from the Export Control Joint Unit.

Export allowed
Guidance for completing CDS Data Element 2/3
Document code CDS guidance CHIEF guidance
9104

Enter the following:

  • For an Open General Export Licence enter GBOGE followed by the licence number

  • For Open Individual Export Licence enter GBOIE followed by the licence number

  • For Standard Individual Export Licences enter GBSIE followed by the licence number

  • For Standard Individual Transhipment Licence enter GBSIT followed by the licence number

  • If using more than one licence, then a separate 9104 entry in DE 2/3 is required for each licence.

  • For supplementary declarations, use EA, IA, JA, or UA as appropriate.

  • Use one of the following document status codes: AC, AE, AF, AP, AT, EA, EE, EP, ES, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, XW, XX

  • With the exception of AG, AS, EL, IE, IS, JE, JS, UE, UP, US, XB, XF, XU, enter appropriate status code listed in document status codes for harmonised declarations.

  • For supplementary declarations, use EA, IA, JA or UA as appropriate.

Y999
  • Complete the statement ‘CDS Waiver’.

  • Use of this code constitutes a legal declaration that the goods do not require the certificate or licence shown.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

This document code is available on CDS only.

Customs Declaration Service (CDS) Licence Waiver

The use of 999L allows a CDS waiver code to be declared for prohibited and restricted goods, allowing declarants to confirm that the goods are not subject to specific licencing measures. You must enter ‘CDS Waiver’ in the additional documentation field for this commodity item.

This waiver cannot be used for goods that are imported/exported or moved to/from Northern Ireland.

Export control for All countries

Code Description
EX001 The export of these items may be controlled under the Export Control Order 2008 as amended. Please refer to the Goods Checker to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

Export control on restricted goods and technologies for Iran

From 1 Jan 2021

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
C052

Export authorisation for restricted goods and technologies

Import/export allowed after control
Y999

Goods for which an export licence is not required. Please use the Goods Checker to determine whether your items are controlled and whether you need an export licence from the Export Control Joint Unit.

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance CHIEF guidance
C052
  • For status codes: AC, AE, AF, AP,AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, or XX: Enter the reference number of the authorisation document in the Document Identifier (Second Component).

  • If using more than one document, then a separate C052 entry in DE 2/3 is required for each document.

  • For status code XW: Enter text ‘Specific document’ in the document reason field.

  • For status code XX: In addition to completing the Document ID field, enter text ‘Exempt’ in the document reason field.

  • Use one of the following document status codes: AC, AE, AF, AP, AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, XW, XX

This document code is available on CDS only.

Y999
  • Complete the statement ‘CDS Waiver’.

  • Use of this code constitutes a legal declaration that the goods do not require the certificate or licence shown.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

This document code is available on CDS only.

Export control on restricted goods and technologies for Iran

Code Description
EX010 The export of nuclear and missile list items; graphite and relevant metals and other restricted goods to or for use in Iran may be controlled (as well as related activities). Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

Export control on restricted goods and technologies for North Korea

From 1 Jan 2021

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
C052

Export authorisation for restricted goods and technologies

Import/export allowed after control
Y999

Goods for which an export licence is not required. Please use the Goods Checker to determine whether your items are controlled and whether you need an export licence from the Export Control Joint Unit.

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance CHIEF guidance
C052
  • For status codes: AC, AE, AF, AP,AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, or XX: Enter the reference number of the authorisation document in the Document Identifier (Second Component).

  • If using more than one document, then a separate C052 entry in DE 2/3 is required for each document.

  • For status code XW: Enter text ‘Specific document’ in the document reason field.

  • For status code XX: In addition to completing the Document ID field, enter text ‘Exempt’ in the document reason field.

  • Use one of the following document status codes: AC, AE, AF, AP, AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, XW, XX

This document code is available on CDS only.

Y999
  • Complete the statement ‘CDS Waiver’.

  • Use of this code constitutes a legal declaration that the goods do not require the certificate or licence shown.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

This document code is available on CDS only.

Export control on restricted goods and technologies for North Korea

Code Description
EX008 The export of arms and WMD-related items; Aviation fuels; Condensates and natural gas liquid; Curde oil; Helicopters and vessels; Industrial machinery, vehicles, iron, steel and other metals; luxury goods; Refined petroleum products; gold and precious metals or diamonds to the Democratic People's Republic of Korea is controlled (as well as related activities). Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

Export control on restricted goods and technologies for Russia

From 1 Jan 2021

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
C052

Export authorisation for restricted goods and technologies

Import/export allowed after control
Y999

Goods for which an export licence is not required. Please use the Goods Checker to determine whether your items are controlled and whether you need an export licence from the Export Control Joint Unit.

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance CHIEF guidance
C052
  • For status codes: AC, AE, AF, AP,AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, or XX: Enter the reference number of the authorisation document in the Document Identifier (Second Component).

  • If using more than one document, then a separate C052 entry in DE 2/3 is required for each document.

  • For status code XW: Enter text ‘Specific document’ in the document reason field.

  • For status code XX: In addition to completing the Document ID field, enter text ‘Exempt’ in the document reason field.

  • Use one of the following document status codes: AC, AE, AF, AP, AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, XW, XX

This document code is available on CDS only.

Y999
  • Complete the statement ‘CDS Waiver’.

  • Use of this code constitutes a legal declaration that the goods do not require the certificate or licence shown.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

This document code is available on CDS only.

Export control on restricted goods and technologies for Russia

Code Description
EX012 The export of energy-related goods for use in Russia and infrastructure-related goods and technology to Crimea is controlled (as well as related activities). Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

Export control for Russia

From 23 Jun 2022

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
Y080

Goods not subject to sanction

Import/export allowed after control
9011

Goods subject to sanction with a DIT import or export licence

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance CHIEF guidance
Y080
  • Complete the statement ‘Not subject to sanctions’.

  • Use of this code constitutes a legal declaration that the goods are exempt from sanctions.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

This document code is available on CDS only.

9011
  • Enter GBSAN followed by the reference number of the licence.

  • If using more than one licence, then a separate 9011 entry in DE 2/3 is required for each licence.

  • Status code AC should only be used as a fallback for when electronic licence functionality is inoperable.

  • Use one of the following document status codes: AC, EA, EE, EL, EP, ES

  • Use one of the status codes EA, EE, EL, EP, ES.

  • For supplementary declarations, use EA.

Export control for Russia

Code Description
SN028 Goods exported to Russia are subject to sanctions. Please consult the statutory guidance for up to date advice on the sanctions and any exemptions and conditions that may apply to your goods.

Export control on restricted goods and technologies for Syria

From 1 Jan 2021

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
C052

Export authorisation for restricted goods and technologies

Import/export allowed after control
Y999

Goods for which an export licence is not required. Please use the Goods Checker to determine whether your items are controlled and whether you need an export licence from the Export Control Joint Unit.

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance CHIEF guidance
C052
  • For status codes: AC, AE, AF, AP,AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, or XX: Enter the reference number of the authorisation document in the Document Identifier (Second Component).

  • If using more than one document, then a separate C052 entry in DE 2/3 is required for each document.

  • For status code XW: Enter text ‘Specific document’ in the document reason field.

  • For status code XX: In addition to completing the Document ID field, enter text ‘Exempt’ in the document reason field.

  • Use one of the following document status codes: AC, AE, AF, AP, AT, FP, GE, GP, HP, IA, IP, JA, JP, LE, LP, SP, TP, UA, XW, XX

This document code is available on CDS only.

Y999
  • Complete the statement ‘CDS Waiver’.

  • Use of this code constitutes a legal declaration that the goods do not require the certificate or licence shown.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

This document code is available on CDS only.

Export control on restricted goods and technologies for Syria

Code Description
EX013 The export of goods relating to chemical and biological weapons; crude oil and natural gas equipment; aviation fuel and aviation fuel additives; Electricity production; Gold and precious metals or diamonds; luxury goods; internal repression goods and technology; interception and monitoring goods and technology to or for use in Syria is controlled (as well as related activities). Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

Export control for Ukraine

From 23 Jun 2022

Meet one of the following conditions and supply the relevant document code(s) on your declaration.

Document code Requirement Action
Y080

Goods not subject to sanction

Import/export allowed after control
9011

Goods subject to sanction with a DIT import or export licence

Import/export allowed after control
Guidance for completing CDS Data Element 2/3
Document code CDS guidance CHIEF guidance
Y080
  • Complete the statement ‘Not subject to sanctions’.

  • Use of this code constitutes a legal declaration that the goods are exempt from sanctions.

  • Sufficient evidence must be held in records to demonstrate eligibility for this waiver which must be produced on demand.

  • No document status code is required.

This document code is available on CDS only.

9011
  • Enter GBSAN followed by the reference number of the licence.

  • If using more than one licence, then a separate 9011 entry in DE 2/3 is required for each licence.

  • Status code AC should only be used as a fallback for when electronic licence functionality is inoperable.

  • Use one of the following document status codes: AC, EA, EE, EL, EP, ES

  • Use one of the status codes EA, EE, EL, EP, ES.

  • For supplementary declarations, use EA.

Export control for Ukraine

Code Description
SN029

The export of goods to non-government controlled Ukrainian territory is prohibited under the The Russia (Sanctions) (EU Exit) (Amendment) (No. 10) Regulations 2022. Exceptions apply for:

  • goods exported specifically to non-government controlled areas of Donetsk and Luhansk oblasts and related to an obligation arising from a contract concluded before 23 June 2022. For this exception to apply, these contracts, or ancillary contracts necessary for their execution, should be concluded by 24 August 2022. The Secretary of State for the Department for International Trade should also be informed at least ten working days in advance of this exception being used.

Please refer to the Statutory Guidance for further information.

Do you need help?

Use our Digital Assistant to get help on classifying your goods.

Close this box

Hide for 28 days

Last updated: 25 April 2024 View latest amendments